Recent content by ViperHU

It was 100% the sub-stream, my utilization is < 10% now. Thanks guys! Now to reconfigure my motion detection and finish setting this bad boy up :)

Hey - great username - yes to all of your questions and I'll pull the GPU, great idea.

Thanks wittaj! You're on every thread I post #guru Will report back and let everyone know how I made out.

Thanks - will give that a shot and see how I fare.

I'm referring to changing them directly to the camera; I'm not sure why they are no longer present. They were there when I used the Dahua NVR. Once I ditched it for BI I no longer had that same access. Is it fair to say that nearly everyone who is running low CPU is using sub-streams? I had no...

Thank you - I never had an issue changing the camera settings, I had tweaked everything directly to the cams when I used the NVR, but now most of the drop-downs are blank. I'm really hesitant to reset each camera, taking the 5442 apart is a bit of a PITA and I need to get on some ladders :) Your...

Hi Guys, Wanted to check the optimizations with you to see if you thought I've exhausted everything in the Wiki (and beyond) and if I should be comfortable/complacent with 60% CPU/50% RAM utilization. Please also let me know if there are any screenshots that would be helpful here! (4) Dahua...

Thank you! I'm tech savvy, I'll go that route with a laptop if factory resetting means removing each cam and manually resetting it (that would be a huge PITA).

Hi Guys, Scratching my head here. Started out with a Dahua NVR and all cameras issued an IP/accessible via browser/NVR Moved to Blue Iris set-up Unable to see my cams in EdgeRouter; they're not on a typical 192.168.X Used Dahua Config Tool to find my cams, they're all there and issued...

Good call-out, I'll either find another use for the NUC or send it off to a good home. Thanks Sebastian! Sent from my SM-G986U1 using Tapatalk

Hi Guys, I happen to have a spare NUC sitting around with the specs below. My current system consists of (5) IPC-T5442T-ZE and I have a TL POE switch with enough ports to accommodate. I also have a Synology DiskStation DS218play, which I can use to store footage. It's running two RED drives. I...

Tried and true words of wisdom. When I hit the "e" I cannot open up the individual camera. I was previously able to access it through the web-based GUI otherwise.

Of course now that I upgraded firmware on camera and NVR, all the feeds are black/blank. #gah

Thanks! I had to run an NVR update and I'm seeing these settings now :)

Hi Guys, Using NVR4208-8P-4KS2 with IPC-T5442T-ZE cams. Can I either a) auto set select cameras to color during day and B&W at night? Or, b) turn off IR? Use case: cams that point in direction of outdoor lighting that have select areas blown out. When I manually toggle to B&W, they look great...