Search results for query: reolink

Yea, I figured it afterwards. My POS reolink doorbell adapter worked.

(2) Deconstruction of a dangerous misleading youtube review "Finding the BEST 4K Security Camera NVR Package (Reolink vs Amcrest vs Swann)" | IP Cam Talk

Thanks for the reply. The reasons that I was choosing reolink was availability in NZ, and the competing brand that I had seen available here ( Hikvision ), I had seen fail. So what would you recommend, given that I would need to then import from Alixpress, so it's got to be another Chinese brand?

Anything from Reolink, except their new door bell cam, should be avoided, if you expect it to be reliable.

I hope you have better luck with it than I did. The lack of WDR rendered the camera useless to me when trying to identify someone approaching the door.

I will be replacing this Amcrest AD410 with Reolink 5MP. So far all the reviews I've seen on Youtube are pretty good. I shall see. It's supposed to get here tomorrow.

This is an Amcrest Doorbell.

I'm surprised and disappointed that Reolink will NOT address this point with a firmware update and a sw fix for this.

...reason, the only common factor seems to be the heat of the day. This is my second AD410, so I figured after reading all the reviews of the ReoLink 5MP Doorbell Camera, I would give that a try.....After 48 hours of having it installed, it's being returned to Amazon. The ReoLink just doesn't...

I'm looking at purchasing a couple of Reolink 830a for their PT"z" capability, and want to ask some questions of anyone who's worked with them; If the camera is facing the road, 20m away, will it be triggered by every car going past (50kmh zone)? Are the floodlights configurable so that they...

...wifi 1080p's (Wyze with custom firmware). The two camera locations I highlighted with purple I would want to be doorbell cams, probably the Reolink everyone seems to like. Only other thing of note is there is an elevation change. It's a daylight basement so the 1st level entrance and the...

I have 2 Reolink Duo 2 cameras that we have been using for nearly 2 years. While that are not great at night time motion capture, they have otherwise worked decent for us and the super wide FOV is just what we need. Over the past 6 months or so, that have started losing their user accounts...

Personally if access isn’t an issue I would probably go with what a lot of IPC members are doing. Which is installing that Reolink POE doorbell which seems to have good reviews. No more worries about WiFi and streaming video issues.

...So after thinking more about this, when power came back On those two times, my pfSense router was probably not fully up yet so the ReoLink Doorbell had nothing to connect to, well my AP that is was not yet talking to the pfSense router. So no DHCP server to assign an IP. But when I brought...

Hopefully cheaper solutions will become available...

I just purchased the Reolink doorbell, with the hopes of having it trigger my mechanical doorbell. The 433MHz receiver that I got from AliExpress isn't working. :confused: I'm guessing, for the same reasons as have been stated here, given that my Chime has "v2" on it. (Frustratingly, I even...

Can you explain this sentence? Sorry but in relly poor of knowledge of this topic! Anyway thank for the suggestion, This cam exist even in bullet version? Other question, this cam is aivable on in 2.8mm and 4mm, Thesre is a camera aviable in 8mm version? This is a view o the reolink 822 at 8mm:

Hi all, I need to replace 2 reolink cameras. I have to replace an 810a and an 822a. Both must be 4k and must integrate AI for people detection. The one that replaces the 822 must also be equipped with a good zoom or a fixed lens with many mm (the reolink has a 5x and I don't know what the...

...difference For BI, I was running version 5.8.6.7 but upgraded (5.9.0.7) when this problem started yesterday. My plans to replace several Reolink cameras with this model are on hold as for now I am not convinced my problem isnt HW related. Any ideas on what I should try to find a solution???

I plan on using these cameras with Scrypted as well as Blue Iris. How is your experience so far with Scrypted? thanks

...this thread on all the consumer grade junk (most of it wifi) that people have bought and look how poor the performance is. And don't think Reolink either LOL... The Typical picture of a Perp on Nextdoor-type Apps with Consumer Grade Cameras like Ring, Nest, Arlo, Canary, Wyze, etc. And in...

SOLVED: Though there were a few moving parts to my issue, the main one that applies to this thread is that my two Reolink RLC-811A camera's sub-stream timeclock would drift over time, to the point where Blue Iris would receive that stream 10+ seconds after the event, thus leading to a...

As noted, you can have AI built into your cameras, NVR, or use third party AI software to add this functionality to BI and other systems. If you want to use the AI built into the camera, you need to use ONVIF triggers. The camera will send out an ONVIF trigger when it's AI senses the correct...

...a lot of event error... And the camera doesn't have onvif option... Reading on the web, is seams an anonymous access not permitted (and I don't understand why it's trying an anonymous access when the camere is connected using right credentials. My camera are annke c800 and reolink 810a and 822.

...the fact that he is not technical at all and he is a bit of a button pusher as he likes to poke around in the system. I currently have some reolink 811-a cams and some empire tech bullets in the more important areas. Is there a NVR that will play well with various brands of cameras using...

...9 cameras 7 are 4k, 1 is 5MP and the older is 3Mp, the frame rate is 15fps for 7 cameras, and 25fps for 2. I have a mix of brands (annke, reolink, haktivision) I'm interested in human recognition for all the camera. 5 camera can recognize humans by themselves but this functionality can't be...

Yup. I was avoiding cutting things if possible. I have just 1 layer covering it with the cheap duck brand electrical tape off amazon and I check at usual times to see if the light is on or not since it does still show through the center ambient sensor. If you are afraid of the heat issue that...

Appreciate the information. Yes, the ReoLink is 10/100 on the 8 POE ports but 10/100/1000 on the 2 uplink ports. Comparing the NetGear to the ReoLink is almost like apples and pears. For my use, 10/100 is all that is needed for each POE port. The Dahua cameras usually use about 10 megs each...

...100Mbps for each port with only 1,000Mbps LAN uplink ports, don't plug a WiFi Access Point into it, or a PC, just PoE security cameras. Reolink is a good starting point for an Individual to start their PoE security cameras system. You can get it up and running for under $500, then get a...

Noticed that the 8 port ReoLink 120 watt POE switch runs about $63. The equivalent 8 port NetGear POE switch is $110. Most here indicate that overall ReoLink products are not a consideration for purchase except for the video doorbell. In reviewing IP Cam comments, there are a few no buy...