Search results

  1. fenderman

    New, learning but I’ve gotten started

    you dont want to run it in the house...its stiffer and a pain to work with....spend a few bux extra for the outdoor run.
  2. fenderman

    Viewing BlueIris cameras at secondary location within LAN

    A tablet would allow you to maximize a camera easily by tapping it...I personally prefer windows tablets with firefox in kiosk mode...boots right into UI3...however you limit screen size to 15 inches or so for reasonably priced used tablets...On other areas I just run hdmi over ethernet to a...
  3. fenderman

    Send Pushover notifications with pictures and hyperlinks

    Awesome! I dont know how I missed your gif tool thread but ill be giving this a whirl with V2 as well.
  4. fenderman

    Motion detect recording starts too late

    How can you charge someone to install a camera system when you have little experience? God only knows what else is done incorrectly.... This is another great example for members of this forum of why you need to do it yourself or at least verify experience..
  5. fenderman

    Motion detect recording starts too late

    I hope you didnt charge this guy....
  6. fenderman

    Fireworks or Gunshots?

    The new audio ai in cpai would have a stroke with all those triggers. Gunshots, siren, car horn..
  7. fenderman

    Blue Iris Screen Flashing

    More than likely you have an issue with the cable or termination that is intermittent depending on how the wind blows....
  8. fenderman

    CodeProject.AI Version 2.0

    Great addition. A model that could detect a smoke alarm could be useful as well.
  9. fenderman

    Best software to view from

    Blue Iris would be easier for you to troubleshoot than an NVR remotely.... Just log into TeamViewer on the machine... You need to be more specific about the issues you're having with the NVR... What do you mean by lag... How are you receiving your notifications How is the network set up
  10. fenderman

    Blue Iris Screen Flashing

    Without the remote end for the cable tester, it tells you nothing... Did you terminate to 568b on both ends? Unplug every other camera from the switch while testing...the switch has a 61w total max limit.
  11. fenderman

    Issue with two way talk

    Also note that the screenshot from reddit is just bullshit...none of that is true...think logically..
  12. fenderman

    Issue with two way talk

    You will not have a good two-way talk experience with the blue Irish app... It is walkie talkie half duplex only works with specific cameras... I don't think it's compatible with the reolink doorbell. For any half decent experience you will need to use a manufacturers app.... To do so will...
  13. fenderman

    CodeProject.AI Version 2.0

    I am seeing an issue with 2.4.7 where when gpu is enabled with the yolov5 .net model so that the intel gpu can be used, it returns nothing found all the time despite analyzing the portion of the image where there is clearly a vehicle/person (this is verified in BI where the details show its not...
  14. fenderman

    CodeProject.AI Version 2.0

    Also make sure auto start stop is unchecked in BI, like in tinman's image.
  15. fenderman

    Blue Iris V 3.0.43 connects quickly but lags after connecting

    https://ipcamtalk.com/threads/android-app-freezing-delayed-lag-solved.74101/ I finally got my hands on a friends phone that was having this issue so I could troubleshoot...
  16. fenderman

    Android App Freezing/Delayed/lag - Solved.

    A friend was having issues where the app would lag really bad, 15 seconds between inputs. I could not replicate this issue on several of my phones. Uninstalling and reinstalling did not help because some data is still retained (for example you dont have to re-enter your server settings after...
  17. fenderman

    Tailscale blocking internet access on some android phones - Solved.

    https://github.com/tailscale/tailscale/issues/6891 I have this issue. I made the change as suggested at the end of the thread to disable use tailscale dns settings (this is done on the client app on your pc). Seems to be working but need a few days to confirm.
  18. fenderman

    Code Project constantly restarting when Blue Iris is set to Auto Start/Stop - Solved.

    This was not an issue for me on 2.0.8 but on later versions 2.4.7 included CPAI goes into a start stop loop when the box in the blue iris AI tab is checked to auto start/stop cpai. It seems to only occur when choosing to use the gpu (intel in my case with yolo v5 .net), however I did not perform...
  19. fenderman

    How to enable Native Internet Explorer in Windows 11 to access your IP cams.

    All the steps cost extra....We leave out some steps when the advice is free...
  20. fenderman

    5.8.4 - January 10, 2024

    5.8.4 - January 10, 2024 Improved watchdog effectiveness when a main stream or audio stream is lost. If the camera does not support audio, please disable it on the Audio tab to prevent watchdog resets. Motion detection zone crossing has been expanded to offer negated zones for more complex...
  21. fenderman

    An Awesome Camera

    It sure does....but that wont work with coral anyway...post your error in the cpai thread
  22. fenderman

    An Awesome Camera

    custom models are not supported on coral https://ipcamtalk.com/threads/cpai-coral-detections-not-working.73052/#post-807991
  23. fenderman

    An Awesome Camera

    if that was the case the bi interface would not have stuttered.
  24. fenderman

    An Awesome Camera

    You need to set code project to use the coral module...blue iris does not utilize coral...it is the cpai that does. I believe there is only one model available for coral at this time - could be wrong...
  25. fenderman

    An Awesome Camera

    sounds like you dont have the OS and blue iris running on an SSD. Big mistake.
  26. fenderman

    Understanding Ui3 burden on Bi PC

    Most modern dahua and hik cameras do....the hiks are generally limited to 720p (1mp) but i have seen some with 2 iirc....Also on some hiks its just an option in the substream rather than a third stream. Even with the standard substreams if you have a bunch of cameras up on a monitor you wont...
  27. fenderman

    Understanding Ui3 burden on Bi PC

    again if you use 2mp third stream you wont see a difference...its not full screen... when in a matrix with 20 cams
  28. fenderman

    Question - BI and CPAI detects Person but still goes to Cancelled Alerts

    You will need to set it up in the AI tab in the general settings as well as the alert tab in camera settings.
  29. fenderman

    Upgrade?

    You are running a 3+ year old version of BI. There is certainly something of value in the updates...however if you dont intend to use them whats the point. Read the notes then upgrade to the latest stable version.
  30. fenderman

    Are cloned cameras linked?

    From the help file: If you select to Group clone clips, all cloned camera clips will be included with the master’s clips when the clips list is filtered by camera.
Top Bottom