Search results
-
CodeProject.AI Version 2.0
The CodeProject.AI Server Mesh - CodeProject.AI Server v2.4.1 -
-
CodeProject.AI Version 2.0
Most of these problems are from NOT letting CP install fully. When you do the install select "remove previously installed modules & data" and then wait for the installer finish the initial setup. BE SURE to leave status window open and watch the progress of each component as it is downloaded and... -
-
CodeProject.AI Version 2.0
You will need to configure your network to allow your BobPC 192.168.1.202 see BI machine 192.168.50.10. I do not use dual nics so you need to find out how to do that. -
CodeProject.AI Version 2.0
The way you have your Bi machine on a different network segment. Your BI machine can see your Bobpc but not the other way around. I use mine on same network, so can't help you out, but sure someone here can. I would think for it to work right it has to be a 2 way street. -
CodeProject.AI Version 2.0
post a screen shot of that please. it should look like this on slave pc. -
CodeProject.AI Version 2.0
I don't have a GPU to test it, but appears it is geared towards newer hardware. -
They Got Away With Whatever They Were Doing
Hmmm, that is what all mine sound like with the filter on ? So, I guess next question is, does it sound any different when you enable the filter?- Tinman
- Post #9
- Forum: Camera Captures
-
They Got Away With Whatever They Were Doing
Have you tried running the audio without the noise filter ? I never have been a fan of the filter myself.- Tinman
- Post #5
- Forum: Camera Captures
-
CodeProject.AI Version 2.0
YES, the other computers only need CP installed on them as in my case. You do not need BI on others, but could. This explains: The CodeProject.AI Server Mesh - CodeProject.AI Server v2.4.1 -
CodeProject.AI Version 2.0
I also have been testing the 2.4.3 CP beta using the new "Mesh" feature. I use CP in the CPU mode only in a windows W11 environment so it has been very stable for me. The mesh timings are very good. My office computer is only on during the day and early evening and then gets shut off every... -
This is Mind-blowing
Those oversized tires more than likely are what caused all of this. :idk:- Tinman
- Post #20
- Forum: Camera Captures
-
I put together a sky/roof rig with (4) 180* Color4K cams...
Looks like a great project ! My concern is the wind moving the cameras on that mount. I'm thinking a short tripod type might work better. The problem with the satellite type mount is the base is so small for the leverage you will have on it. I have experienced this issue with a weathervane...- Tinman
- Post #21
- Forum: Installation Pics
-
Why work on Windows 12 when Windows 10/11 still isn't the perfect OS?
I still have a shortcut on my taskbar for the control panel! Funny how some of the new places they like to hide settings will sometimes take you to the control panel. 23H2 they have tried to hide stuff even more. -
Review-SD4A425DB-HNY 1/2.8" CMOS 4MP 25x Starlight Auto-tracking MiniPTZ
Just for comparison I checked 2 models this morning on their temps. -
Incoming!
I'm sure that gator is eyeballing the ducks as well :)- Tinman
- Post #6
- Forum: Camera Captures
-
PTZ494M-25X sample clips
A quick sample clip of my daughter's new PTZ494M-25X she purchased from Andy. Of course, dad had to install it. The night clip where the skunks are, was completely dark. Pretty much all stock settings at this point running cam at 15fps @ 4096- Tinman
- Thread
- Replies: 1
- Forum: Camera Captures
-
5.7.5 - April 20, 2023 - Onvif updates
This has already been covered.... probably will all go away in a few days. Meanwhile, just use the date setting and not week. It works fine then. OR disable onvif authentication in cam. https://ipcamtalk.com/threads/5-7-5-april-20-2023-onvif-updates.69517/post-807876- Tinman
- Post #166
- Forum: What's New
-
5.7.5 - April 20, 2023 - Onvif updates
no problem, I am curious if this goes away after the real time change ?? Time will tell :lol: I did inform Ken as well.- Tinman
- Post #161
- Forum: What's New
-
5.7.5 - April 20, 2023 - Onvif updates
LOL, I was going to edit my post after figuring that out but hadn't got that far. Thanks for pointing that out. So for some reason on November 1 when Ken released the .12 update, then if you updated, your cameras are restarted within BI and the error showed up. I notice in the WEB 5.0 GUI if...- Tinman
- Post #159
- Forum: What's New
-
5.7.5 - April 20, 2023 - Onvif updates
UPDATE: I found that by selecting a date in the DST selection, then the problem is fixed. There is a bug in the camera's DST firmware and it is not reading the correct date using the week setting. Also found that using the date method, you cannot select 2:00 am on the start date, why I show...- Tinman
- Post #157
- Forum: What's New
-
5.7.5 - April 20, 2023 - Onvif updates
you are correct, I just tried to disable DST in the problem cam and still no luck. I then tried to change time back one hour, still no work. I then changed the time to 2 hrs. earlier and bingo, the onvif then authenticated.- Tinman
- Post #156
- Forum: What's New
-
5.7.5 - April 20, 2023 - Onvif updates
Yes, mine snyc to my BI machine via NetTime. Same settings I use in my others as well. Maybe this is the new WEB 5.0 issue ?? It is the only difference to my other cameras as they all run web 4.0- Tinman
- Post #150
- Forum: What's New
-
-
5.7.5 - April 20, 2023 - Onvif updates
Also, I did check and am running the latest version of ODM 2.2.250 and double checked my onvif user password in the camera twice now. Once I turn off onvif authentication in the camera then ODM will also connect fine. I also even tried my BI demo install and reverted it back to 5.7.9.12 and...- Tinman
- Post #145
- Forum: What's New
-
5.7.5 - April 20, 2023 - Onvif updates
Exactly, same error in it I get in BI. This camera is almost identical to all my other Dahua cams and they all work fine.- Tinman
- Post #143
- Forum: What's New
-
5.7.5 - April 20, 2023 - Onvif updates
Also, you can't use the find/inspect feature! I use this all the time. It's not just the events, it is failure to authenticate the onvif user. Here's another kicker, I tried to use Onvif Device Manager and it also will not authenticate. So now I am stumped as why this worked before the update...- Tinman
- Post #141
- Forum: What's New
-
5.7.5 - April 20, 2023 - Onvif updates
Just my newest PTZ cam did the same thing. And I could not roll back as it would not fix the error. I like you just disabled onvif authentication. I did not email Ken about it as I thought it was my cam, but yes it did start right after .13 update.- Tinman
- Post #138
- Forum: What's New
-
Why work on Windows 12 when Windows 10/11 still isn't the perfect OS?
I still use 3.11 LOL