Search results

  1. Z

    Blue Iris motion detections clips not getting captured

    Dear folk I have 3 HiVisionn cameras (DS-2CD2032-I) connected through LAN cables and I am using Blue Iris software and windows 7 I realized two out of 3 HikVision cameras motion detection's clips not getting captured I tried to compare settings of the one that is working properly to the other...
  2. Z

    Recommend Outdoor security camera with long range and better resultions

    Thanks SouthernYankee for your help
  3. Z

    Recommend Outdoor security camera with long range and better resultions

    Dear Experts I am using Blue Iris software that is installed on desktop with windows 7 and 3 Hikvision outdoors cameras (DS-2CD2032),,4 years old Looking to buy another 2 outdoors type PoE but longer range [10 m/33 feet and above] and better resolution and they would be used in a poor...
  4. Z

    BlueIris clips won't get updated the last one sixth of Feburary 2019!!!

    Thanks for that.issue fixed
  5. Z

    BlueIris clips won't get updated the last one sixth of Feburary 2019!!!

    Forgive my ignorance I guess you were asking me : And profile setting is attached
  6. Z

    BlueIris clips won't get updated the last one sixth of Feburary 2019!!!

    Thx fenderman I will check the profile Regarding CPU I guess my computer is an old type and I need to replace it I remembered I chose the option to save the files into the internal second hard drive
  7. Z

    BlueIris clips won't get updated the last one sixth of Feburary 2019!!!

    Dear folks Blue Iris used to show daily clips but all of a sudden the clips won't get updated. The last one in screenshot below dated sixth of February 2019 !!!!I don't why Thanks
  8. Z

    Hikvision DS-2CD2142FWD-I PoE issue with TP

    Thanks and appreciate your help
  9. Z

    Hikvision DS-2CD2142FWD-I PoE issue with TP

    Dear Experts I have got TP-Link TL-SG2210P PoE switch and I have 3 HiVisionn cameras (DS-2CD2032-I) connected through LAN cables. I realized one HikVision camera not working When I checked I realized it is not getting power from the TP-Link switch!!! ,,,,changed Ethernet cable for the camera...
  10. Z

    Blue Iris Errro : 8000007a no signal

    Noted Thanks for your help
  11. Z

    Blue Iris Errro : 8000007a no signal

    Thanks awsum I have port forwarding setup from my Linsys router to the Blue Iris only not to the 3 cameras Are you advising that I need to replace Blue Iris's port forwarding with VPN ? Regards
  12. Z

    Blue Iris Errro : 8000007a no signal

    please help Thx
  13. Z

    Blue Iris Errro : 8000007a no signal

    Dear fenderman This is what I did on all 3 cameras that I have got (unchecked UPnO) On my Linksys router I don't have any port forwarding to cameras only for Blue Iris PC All 3 cameras were working fine today the same camera out of three has the same error :8000007a no signal Any other...
  14. Z

    Blue Iris Errro : 8000007a no signal

    Ohh I see
  15. Z

    Blue Iris Errro : 8000007a no signal

    Noted In this case I won't be able to access it remotely via mobile phone ,,,no issue
  16. Z

    Blue Iris Errro : 8000007a no signal

    Ohh I see The interesting thing only one camera out of three has always this issue Are you advising me to do that for a testing purpose to see how it goes ? or I should do it permanently ? Thx
  17. Z

    Blue Iris Errro : 8000007a no signal

    Hi fenderman Same camera has been resetting so far 3 times,,and now I am experiencing the same error (because of the password) : 8000007a no signal Basically only one camera out of three keeps resting and keeps losing its assigned password,,,,I don't why !!! All three cameras have same...
  18. Z

    Blue Iris Errro : 8000007a no signal

    Thanks fenderman Although all three cameras have the same password , but for some reason the one that I had problem with it was not let me to login to the web interface Factory reset it and now everything is working
  19. Z

    Blue Iris Errro : 8000007a no signal

    Noted Will check and get back to you
  20. Z

    Blue Iris Errro : 8000007a no signal

    Sorry fenderman I was away from my camera therefore I couldn't reply you I did as per below and I restarted the software still no luck Hivision DS-2CD2032-1 3MP IR Bullet Network Camera The whole system was shut down for about 3 months as i moved house As far as I am aware no
  21. Z

    Blue Iris Errro : 8000007a no signal

    Dear Expert I have 3 Hikvision Cameras installed at my home and I am using BlueIris one of cameras started showing Error below : https://imgur.com/a/g3GPECS I can ping the ip address for a camera. I can view web interface for the camera means camera is reachable. I restarted BlueIris...
  22. Z

    Blue Iris v4.0.6.x change date format and other issues

    All good now My mistake I ended up having two licenses now Back to my question
  23. Z

    Blue Iris v4.0.6.x change date format and other issues

    I didn't lie, this is what I said Means update worked but not free because I interpreted the expiration message mistakenly for the update ,,,,while that message is supposed to be an expiration for "support" as you said
  24. Z

    Blue Iris v4.0.6.x change date format and other issues

    Updated is working on both license the old one and the new one If I keep the old license blue iris shows me the message expires unless that message means something else
  25. Z

    Blue Iris v4.0.6.x change date format and other issues

    I used the old license on the latest update and this is what I have got ,,,,,,,,,,I am not misleading people don't accuse without proof
  26. Z

    Blue Iris v4.0.6.x change date format and other issues

    Treat people with respect even if you own the world !!!!!!!!!!! I have license and yes I have license
  27. Z

    Blue Iris v4.0.6.x change date format and other issues

    First be polite when you reply , I am not trying to give false information this is what happened to me Second I bought I legitimate license don't try to guess
  28. Z

    Blue Iris v4.0.6.x change date format and other issues

    This was the email reply on 20 Oct 2016
  29. Z

    Blue Iris v4.0.6.x change date format and other issues

    I did click the update button from within the software and it said trial therefore I bought another license
  30. Z

    Blue Iris v4.0.6.x change date format and other issues

    Done CPU usage dropped dramatically ,,,,I guess my desktop is not perfect hardware match to blue iris recommendations as CPU is core 2 and RAM is 4 Thanks Under Camera Properties --> Video --> unchecked " Enable Overlay" I bought mine 19.5.15 and unfortunate not free any more I bought another...
Top Bottom