Search results

  1. A

    Recording file size exceeds than specified maximum

    Hi This is the setting for all the cameras - I have just checked The more surprising thing is that it has been working correctly for the last nine months and that has been happening since 9th of September 2024 Best regards Deepak
  2. A

    Recording file size exceeds than specified maximum

    Guys Any update on this one please? Best regards Deepak
  3. A

    Recording file size exceeds than specified maximum

    Hi Everybody My system seems to be working fine so far until I noticed just now that the recording files from 6 of the 8 cameras are around 30 Gb size when I have specified the file size to be around 4 Gb as shown in the screenshot below :- Just checked the settings are it seems all good -...
  4. A

    How to setup video footage across 2 physical HDD's for my security cameras

    Hi Wittaj No impact on Pushover script? Deepak
  5. A

    How to setup video footage across 2 physical HDD's for my security cameras

    Hi Thanks for your response. Do I need to create a 'Stored' folder on this drive and make the size 0 bytes as I have done in the existing one. Deepak
  6. A

    How to setup video footage across 2 physical HDD's for my security cameras

    Hi Everyone I have just purchased another HDD (8 Tb) to supplement the existing 6 Tb HDD that I currently have for my security camera setup. Currently, the continuous recording from all of the 8 cameras go the New folder on the existing 6 Tb HDD (D:\drive). I now would like split the...
  7. A

    Recommended recordings file deletion in Blue Iris - Capacity or Age dependent

    Hi Wittaj I think this has been misinterpreted. I have never intended to say that I want to MOVE files - I don't. Let's say that the current set up records all the footage on the only existing drive - Drive A (6 Tb) I now add a new drive - Drive B (8 Tb) When I said "set up such that the...
  8. A

    Recommended recordings file deletion in Blue Iris - Capacity or Age dependent

    Hi Wittaj I know its become kind of a longish post but I would greatly appreciate yours and others' views on these for my own knowledge and getting the best performance out of the system. Agree with everything you have suggested. As you have said that if I have storage capacity of about 11...
  9. A

    Recommended recordings file deletion in Blue Iris - Capacity or Age dependent

    Hi Wittag Thanks for your response. Let that sit with until I get the hang of what you are trying to tell me. I will then maybe comeback to you with possibly more questions, hopefully not! I will need to check if I am recording mainstream or substream? How do I check that? Deepak
  10. A

    Recommended recordings file deletion in Blue Iris - Capacity or Age dependent

    Hi All I have read a fair bit on this forum about the recommendation of deletion of recordings files in Blue Iris. It is strongly suggested, from what I infer, that the recordings files should never be set up to be deleted by the system based on the age of the files but should be set up to be...
  11. A

    Help with Blue Iris Setup

    No issues. Thank you albeit a trifle late. Deepak
  12. A

    Help with Blue Iris Setup

    HI Wittaj Yes, you did and I must have been seeking a little bit more of a confirmation before I actually changed anything for fear of stuffing things up but nevertheless. So, first I am now try and change the the I Frame Interval from 50 to 25 for one of the cameras to match it to the Frame...
  13. A

    Help with Blue Iris Setup

    Please ignore this message as I have now been able to record them continuously. I, for some reason, had to be reboot the computer. All good. But if any of you can still please provide an answer to my earlier message about the I Frame Interval matching the Frame Rate, that would be great...
  14. A

    Help with Blue Iris Setup

    Hi Jaydeel Thanks for the information. At least now I know why and l am quite comfortable with it. Further, I just tried to set up the recording for one of the cameras but it still seems to be recording only when it see some motion - it doesn't necessarily sends an alert when that motion is...
  15. A

    Help with Blue Iris Setup

    Thanks Wittaj for your response. So I am going to be changing one item at a time :- Changing the i Frame Interval from 50 to 25 (trying to match the default Frame Rate of 25) Like the ones with red highlighted borders :- As I make this change, nothing is to be done on the Blue Iris...
  16. A

    Help with Blue Iris Setup

    Hi All Any suggestions of my latest queries please? Deepak
  17. A

    Help with Blue Iris Setup

    Hi Wittaj I have an update on where I gotten up to with setting up alerts on Blue Iris - not bad so far. I couldn't get Blue Iris on its own to eliminate the alerts from car headlight. As advised, I then installed the Code Project AI and configured it to identify car/person etc using the...
  18. A

    Help with Blue Iris Setup

    Hi Wittaj Thanks for the update. I will try that tonight after I get home and let you know. Deepak
  19. A

    Help with Blue Iris Setup

    Hi Wittaj Thanks for your response. I didn't install AI because I remember very early in my endeavors to build this security system, I was advised that I shouldn't install it (it was Deepstack I think that they were referring to) unless I am looking for recognizing car number plates, which i...
  20. A

    Help with Blue Iris Setup

    Hi Everybody Thanks to you all, I have been able to select, buy and install the security cameras at my home. I have a dedicated PC serving as the NVR and Blue Iris as the software. My cameras are all Uniview :- 3 off 4 MP cameras with 1/1.8" sensors and 5 off 5 MP cameras with 1/2.8" sensors...
  21. A

    Looking for advice of Camera and Software

    Hi Everyone In the Pushover screenshot that I received (shown below) why do I get the "&CAM &MEMO" and how do I get it to resolve to the Camera short name and some text supposed to be in the field MEMO? I tried to follow everything that was specified in the post from Jaydeel but can't seem...
  22. A

    Looking for advice of Camera and Software

    Hi All I have further updates with a little bit of success. This is the command that I successfully ran in the Command Prompt :- This is the pushover notification that I received almost instantaneously :- A couple of points of note :- 1. I had pasted this screenshot from the camera...
  23. A

    Looking for advice of Camera and Software

    Hi All Edited the code like so and running it doesn't come up with an error but doesn't show anything Is this how it is supposed to be? Best regards Deepak
  24. A

    Looking for advice of Camera and Software

    Hi Everyone Just trying out the curl command and I can't seem to get it working. This is my command (the cmd is run as an administrator) :- curl.exe https://api.pushover.net/1/messages.json -s --form-string "mytoken_redacted" --form-string "user=myuserdetails_redacted" --form-string...
  25. A

    Looking for advice of Camera and Software

    Hi Everyone Guys, I am looking for some help to set up the notifications on Pushover app. Not trying to be after your blood but just that we have a long weekend here and I would be able to try out things that might be suggested over those periods relative to normal weeks. So any quick help or...
  26. A

    Looking for advice of Camera and Software

    Hi Guys Sorry for the long absence. Things seem to be working ok with my camera. However, the notifications don't seem to work as I think they should work. It's been set up on the camera web interface for now (as I don't know how to set it up on Pushover - looking for help to do so on that...
  27. A

    Looking for advice of Camera and Software

    Hi Guys Thank you so much for your responses. I will try and implement all of them over the weekend and see how I go. Greatly appreciated. Deepak
  28. A

    Looking for advice of Camera and Software

    Hi All Back here after a long while. All of the cameras have now been installed over the weekend. Home networking setup has also been done by this IT Networking chap to allow for the footage to be securely viewable over the internet on the mobile - created a dedicated LAN for the cameras and...
  29. A

    Looking for advice of Camera and Software

    This is the only thing that I can find under Image - see attached file Also the camera model number is 'IPC3634SE-ADF28K-WL-I0' Found it What should it be - its currently set as Ultra low. Deepak
  30. A

    Looking for advice of Camera and Software

    Thanks. Will try that tomorrow and let you know
Top Bottom