Search results

  1. X

    DS-2CD2387G2P-LSU/SL Panoramic 4k

    It does support ONVIF. Unfortunately it’s a very wide view so the person and car detection depends on your outdoor lighting and on the size of the scene you are trying to frame. I am using it as a full overview camera. Unfortunately due to that it doesn’t do the best at AI detections, however it...
  2. X

    IPC-Color4K-T and IPC-Color4K-T180 230227 Firmware

    After I initially did the October firmware update from Andy I did do the factory reset one time. I didn’t do 3 times though. The update I did just a few days ago was going from Andy’s to the Dahua official version. I will switch back to Andy’s and try the factory reset 3 times.
  3. X

    IPC-Color4K-T and IPC-Color4K-T180 230227 Firmware

    Well so much for them staying gone. Once I didn’t have the 4k stream active for a few seconds it went back to dancing pixels again. I reached out to Andy to see if they can get this fixed in a firmware update somehow.
  4. X

    IPC-Color4K-T and IPC-Color4K-T180 230227 Firmware

    I also just found that if I close the browser all together while having the image adjustment tab open it leaves the picture settings in the fixed state and I don’t have any blue dancing pixels for now at least… yay!
  5. X

    IPC-Color4K-T and IPC-Color4K-T180 230227 Firmware

    I just found something insanely odd happened. I opened the live view with SmartPSS and was getting the blue pixels dancing. I then opened the web interface with the Image section where I can control brightness etc… then all of the sudden the blue pixels dancing went away. I tested flashing my...
  6. X

    IPC-Color4K-T and IPC-Color4K-T180 230227 Firmware

    Twinkling stars I would love to see. I don’t want to see the blue twinkling pixels all over the place. I tried playing with the 3d and 2d noise reduction some but don’t really know how to adjust it properly. I guess I’ll look into that more.
  7. X

    IPC-Color4K-T and IPC-Color4K-T180 230227 Firmware

    So to high of bitrate can cause problems? I have been setting all cameras to cbr maxing the bitrate and 15 fps. I was told to increase it when I was having quality issues. I think it’s at 12288 right now. It wasn’t foggy those nights that i can remember, the foggy look had been being caused by...
  8. X

    IPC-Color4K-T and IPC-Color4K-T180 230227 Firmware

    Well it was better for a couple days. It still looks much better than it did originally regarding color saturation and richness at night with the current settings, however apparently I am still getting tons of blue pixelation artifacts dancing around against the clouds and sky, even in the grass...
  9. X

    IPC-Color4K-T and IPC-Color4K-T180 230227 Firmware

    I also didn’t do a factory reset before or after upgrading I left all settings the same. Photos from 12-31 may have been before I enabled a separate day and night profile but it did still have HLC at 100, 1-2 had the new night profile, 1-4 and 1-10 have the Dahua firmware. They all have HLC set...
  10. X

    IPC-Color4K-T and IPC-Color4K-T180 230227 Firmware

    After still having some quirky problems with the version he shared recently... I loaded the exact same firmware number but the Dahua USA version from their site and image quality is better, the schedule changes correctly, and the night video is much brighter/better!
  11. X

    Blue IRIS yellow message at bottom !! D: -1B

    Ah that makes sense. I also cleared out a value for Aux1 that still referenced a D: drive that is no longer present in the system. That makes total sense why it was saying that now. Thank you!
  12. X

    Blue IRIS yellow message at bottom !! D: -1B

    The new (60GB) and alerts (30GB) go to the C: 500GB SSD, then have move configured to the stored location which has an (8TB WD Red HDD configured with a size of 4000GB in BI so only configured and only have 2.14TB in use of the 4000 configured. I don't think its storage related. I do have a 16...
  13. X

    Blue IRIS yellow message at bottom !! D: -1B

    At the bottom of my BI console timeline I recently started getting a message that shows "!! D: -1B". Does anyone know what that means?
  14. X

    5.5.8 - June 13, 2022 - Code Project’s SenseAI Version 1 - See V2 here https://ipcamtalk.com/threads/codeproject-ai-version-2-0.68030/

    Thank you for the thorough responses! I will give all of that a try and just set the 180 camera not to cancel even if nothing found.
  15. X

    5.5.8 - June 13, 2022 - Code Project’s SenseAI Version 1 - See V2 here https://ipcamtalk.com/threads/codeproject-ai-version-2-0.68030/

    SD Card is on camera. On the Dahua I am not using IVS (Line Crossing) anymore because I was getting way more events when IVS was enabled for no reason. Due to this I currently only have Smart Motion Detection enabled with Human and Vehicle set to record, however in order record SMD it I think I...
  16. X

    5.5.8 - June 13, 2022 - Code Project’s SenseAI Version 1 - See V2 here https://ipcamtalk.com/threads/codeproject-ai-version-2-0.68030/

    I open the BI log box with the AI tab and it identifies my car from my driveway on the left, just nothing from the right seems to get identified. I believe the IVS/Smart Plan is detecting on the camera itself and that it is feeding the events into BI, however I usually use the AI to verify...
  17. X

    New Set-up Issue

    Check the bit rate, make sure it’s set to 8192. Set the FPS to 15 fps. Make sure the firmwares are up to date also.
  18. X

    5.5.8 - June 13, 2022 - Code Project’s SenseAI Version 1 - See V2 here https://ipcamtalk.com/threads/codeproject-ai-version-2-0.68030/

    Ah that’s the part I didn’t know (downrezing). I’ve just been racking my brain trying to figure out why it wasn’t being detected. I guess I need to start figuring out line crossing with BI rather than just relying on AI detection. Any idea why the regular single camera still only barely detects...
  19. X

    5.5.8 - June 13, 2022 - Code Project’s SenseAI Version 1 - See V2 here https://ipcamtalk.com/threads/codeproject-ai-version-2-0.68030/

    Most people disable the high definition processing for AI, however I have it enabled on all of mine since I only have 8x 4k cameras and have an RTX 2060 8gb card for processing this alone on a test system that system has an i9-9900 cpu, then on my primary current I am using an i5-9500 doing cpu...
  20. X

    5.5.8 - June 13, 2022 - Code Project’s SenseAI Version 1 - See V2 here https://ipcamtalk.com/threads/codeproject-ai-version-2-0.68030/

    I would love to see if there's a way for CP.AI to review the entire image to compare against the results rather than just if the trained images are within the same sizing as the object in the image, like you mentioned. For instance my 180 degree camera that covers the entire front of my house...
  21. X

    DS-2CD2387G2P-LSU/SL Panoramic 4k

    That’s the firmware I used and it gave me everything functional.
  22. X

    IPC-Color4K-T and IPC-Color4K-T180 230227 Firmware

    That’s the September update.
  23. X

    2022 EmpireTech Chirstmas Sales

    With IR/full color blending…!!! To make sure physics really gets messed with so it can see perfectly in almost no light…
  24. X

    IPC-Color4K-T and IPC-Color4K-T180 230227 Firmware

    Will this help correct for blue pixels dancing around the screen also? I have been trying to stay with H265 on all cameras to save disk space, however if H.264H is better I’ll try that.
  25. X

    2022 EmpireTech Chirstmas Sales

    Yeah, I’m an IT guy so I know to check that, thank you though.
  26. X

    RTX 2060 H265 playback issue?

    I recently got a new PC for Blue Iris to run on and have been having issues getting smooth playback from H265 video. I only get roughly 1FPS when connected to the RTX 2060 and playing back an exported video with any media player other than Windows Media Player Classic. If I use MPC-HC or VLC it...
  27. X

    2022 EmpireTech Chirstmas Sales

    I never received my ticket numbers via email even though I sent an email with all of this information from my Amazon orders. You replied that you’d send an email with my numbers but I never received it.
  28. X

    IPC-Color4K-T and IPC-Color4K-T180 230227 Firmware

    Thank you, I just cranked it all the way to 16384 to see if it helps initially. I figure I can always trim it back but this should also help smooth it out even more correct? Hopefully this way I can test the bandwidth then if it helps I can scale back and step it up gradually.
  29. X

    IPC-Color4K-T and IPC-Color4K-T180 230227 Firmware

    Factory resetting the camera and reconfiguring it in IE mode definitely seems to have help things regarding video smoothness to the Micro SD card and downloading the video directly from it. Unfortunately it is still playing somewhat choppy within BI. Which setting would it be that makes the...
  30. X

    IPC-Color4K-T and IPC-Color4K-T180 230227 Firmware

    Not sure the latest one is ready for general use yet. I imagine if he thought it was he’d probably update it here.
Top Bottom