Search results

  1. Zion

    Blue Iris alert still sounds alarm after cam deleted

    Hi, much appreciated if someone could tell me how to stop a cam sound alarm trigger that is still sounding even after the camera was deleted. (Deleted and "Show hidden camera's" is enabled, no other cams show their either and each cam has it's own specific sound) Any suggestions appreciated.
  2. Zion

    No signal Error 8000274c

    Thanks again Terk, I tried numerous times making changes to IP, RTSP, etc. and always write things down and if it don't work return it to what did originally work in the beginning. However this time and what allowed cam feed to be seen in BI, I tried changing IP once again from xxx1 to xxx2 and...
  3. Zion

    No signal Error 8000274c

    Thanks Terk, going to do that today. Perhaps doing so will also eliminate one of my cams showing twice in BI and even stranger is I now no longer see my main cam in BI (error is "RTSP 404 Not Found" and tried changing IP several times and the RTSP is the same as the other cams) but I can still...
  4. Zion

    No signal Error 8000274c

    Thanks Vettester, even though everything is now back to original where I can see cams in Blue Iris, I just checked all the cams and they are still all on the same IP address. Please tell me how to change these IP's so they are setup as you mentioned with independent IP addresses. Thanks much.
  5. Zion

    No signal Error 8000274c

    FINALLY FIXED! :-) Huge shout out to all those who took the time to assist me with this. Somehow (DCHP?) or ? changed in Blue Iris as I never made any changes there. You have helped me more than you likely know Terk and I'm grateful beyond words. If there is any way I can return the favor...
  6. Zion

    No signal Error 8000274c

    Thanks Vettester for suggestion. This router as mentioned earlier is new and it replaced the same model which lasted 15 plus years issue free and lag was not the routers fault as I thought, but the moisture damaged cable connector outside. Very thankful since fixing cable there has been no lag...
  7. Zion

    No signal Error 8000274c

    Thanks Terk, here is the PDF manual for my router: http://downloads.linksys.com/downloads/userguide/BEFSR41_V43_UG_A-WEB.pdf and also pictures of router DHCP settings. *Edit images deleted Can still see cam images through the laview nvr interface though there is some lag. Thanks again and...
  8. Zion

    No signal Error 8000274c

    Much thanks once again Terk This is how I have it wired: Modem goes to Internet port of router then router goes to Desktop 1, Desktop 2 (exclusive for BI), Ooma, and NVR. *Router has 4 ports so I am not currently using the 8 port switch mentioned earlier right now.
  9. Zion

    No signal Error 8000274c

    Thanks much Terk, too much on plate and needed to step away from cams today however did find likely cause to internet lag was an outside cable connector moisture took toll on fitting. Dog is doing better and navigating amazing on only 3 legs. Tomorrow's a new day and hope to get back on it it...
  10. Zion

    No signal Error 8000274c

    Thanks Terk, I really appreciate your help. I'll no longer hookup direct to modem and will label everything and send you a picture. Busy day and dog also got injured. :/ What is your PayPal address? PM is fine, i'd like to send you some appreciation tokens. Thanks again.
  11. Zion

    No signal Error 8000274c

    Hi, thanks Terk. Had to tap out from eyes and headache. Spent more time on it but still no image feed in BI. I plan on looking more into what fenderman said saying it is "network" related. In "configuration" BluIris has a field called "Discovery/ONVIF port". LaView NVR software does not show...
  12. Zion

    No signal Error 8000274c

    Thanks much fenderman it's appreciated. Any other suggestions on what you think it may be since you know Blue Iris better than most. Thanks again. *Under Blue Iris Status I notice it says "Server Started on port 81" and under Server the IP Address is different from the one mentioned above that...
  13. Zion

    No signal Error 8000274c

    Thanks much Terk, yes i'd love to get BI working again and feel we are so close to solving the issue. Unfortunately, LaView's web interface and it's abilities are far inferior to Blue Iris. The positive side of the current LaView screen is in the past I've spent many hours trying to add two...
  14. Zion

    No signal Error 8000274c

    Packets Sent = 4, Received = 4, Lost = 0 (0% loss)
  15. Zion

    No signal Error 8000274c

    Thanks and nope, all still the same as when everything was working. If NVR shows IPv4 Address does that mean it is online and reading a signal from my router? If not, what would I look for? Thanks
  16. Zion

    No signal Error 8000274c

    Thanks, glad I caught this before changing and then possibly makeing it another challenge to be able to get online even! Here are a few pics of BI cam video settings (anything I tested and changed I wrote down 1st and then returned it to original since that was working for over a year) *Edit...
  17. Zion

    No signal Error 8000274c

    Thanks again Vettester, in router it says Subnet Mask 255____ and has an arrow down to choose from about 5 other numbers.
  18. Zion

    No signal Error 8000274c

    Thanks much! Feels like were getting it figured out!!! NVR address and other info attached below:
  19. Zion

    No signal Error 8000274c

    Thanks very much Terk, and also on NVR a box is checked saying "Enable DHCP" What do I need to change to get this beast view able again? Thanks again
  20. Zion

    No signal Error 8000274c

    Thanks much Vet, I was unaware of where it was and just accessed it. What part of the router info would you like me to post? Thanks again for everyone's help and patience.
  21. Zion

    No signal Error 8000274c

    Thanks, the setup is Internet cable comes into Modem then to Router then to NVR (the desktop that BlueIris is on is also plugged into router. * I do have a switch that's mentioned above but nothing is currently plugged into it Thanks again, Looked in BlueIris and it doesn't appear to be set to...
  22. Zion

    No signal Error 8000274c

    Thanks again Terk, I looked through BI and unable to find "ipconfig from your Blue Iris server". How do I find this? Did find a setting I didn't know was there saying "Repair Database" do you think this may help?
  23. Zion

    No signal Error 8000274c

    Thanks much once agian, tried Find/inspect as you mention and get error "no auto config" Also experimented with putting in both Media/video/RTSPport and Discovery/ONVIF port, 8000, 80, 854 and still no thing showing. Is there any possibility something could have changed in router which is...
  24. Zion

    No signal Error 8000274c

    Thanks much Vettester, I hope were onto a solution, *Update, wen't into BI, Front E and changed IP number, rebooted and still not showing. Attaching images of BI and and also NVR settings. (NVR doesnt show "Discovery/ONVIF port" as seen in BI. What's strange is everything worked fine as I have...
  25. Zion

    No signal Error 8000274c

    Thanks much fenderman, will check link out now. I have two of the TEG-S80Dg 8 port switches, will they work also for POE or are simply used to add more ports to router? Thanks again
  26. Zion

    No signal Error 8000274c

    Thanks fenderman and i'm using the factory cables that came with it and replaced the internet cable with a new one last night but still no cams showing. I'm going to order a spool and redo all the cables. Which POE switch do you recommend? An out of state friend visiting set everything up but...
  27. Zion

    No signal Error 8000274c

    Yes Terk and thanks, have rebooted everything numerous times. Even when I ran 2 different new cables to NVR it still would not show BI so I'm back to original cord now which is in the air on about a 60' run. (Update - going to now try a new cable, reboot everything with new cable one more time...
  28. Zion

    No signal Error 8000274c

    Thanks again Terk, still trying to get cams online so I can leave the house. Thanks also for your patience as I'm still a bit confused. I typed IPCONFIG into the BI desktop and took a picture which I've uploaded and the first 3 numbers are the same on nvr, camera and on ipconfig (IPv4 Address...
  29. Zion

    No signal Error 8000274c

    Thanks, unfortunately still offline and yes cameras are all Hikvision POE and still no camera's showing on Blue Iris but can see them fine as mentioned on NVR. "If you can't get to the cameras IPs via a web browser then BI won't be able to get to them either" Thanks, so if I copy the cameras IP...
  30. Zion

    No signal Error 8000274c

    Hi, Blue Iris was working fine till yesterday and now I'm getting: No signal - Error 8000274c (timeout; check IP address and port) 0 *date/time is working Camera's are on a LaView NVR with ethernet cable to a desktop exclusively for BlueIris. (not used to access www) I've tried rebooting...
Top Bottom