Search results

  1. B

    Mobile access to a BI v4

    Could it possibly be an issue with the security certificate that BI4 is using is not being trusted by the newer IPad device? I thought I read about some issues with security certificates expiring for apple devices!
  2. B

    Blue Iris on a Unraid VM (Playback lag)

    I am not sure, it is possible that the virtualized video driver may be causing your issue. If UI3 is good then it would potentially eliminate the playback section in BI. I recall reading about some issues with BI when running in a virtualized environment, don't remember the details! Is there...
  3. B

    Blue Iris on a Unraid VM (Playback lag)

    Just to clarify this is running on a Virtual Machine and you are viewing the BI desktop using a virtualized console window, is that correct! Have you tired looking at the videos using a web browser from a real PC using the UI3 web page?
  4. B

    BI Finding Amcrest Cams, but not EmpireTech

    Zipsort Have you considered the possibility that trying to configure a camera remotely might be part of your problem, The remotePC software could possibly be interfering with what you are trying to do. This is something that I have never tried to do, I always do the camera setup when I am...
  5. B

    BI Finding Amcrest Cams, but not EmpireTech

    Once you initialize the camera, you must put the UserID and password into the config tool, so that it can access the camera to change the IP
  6. B

    BI Finding Amcrest Cams, but not EmpireTech

    Does the camera say initialized on the config screen, if not then you MUST do that first, no need to do the factory reset!
  7. B

    BI Finding Amcrest Cams, but not EmpireTech

    Did you set the user ID and password in the utility to what was set when you configured the camera, click on the "Search Settings" button to set that info
  8. B

    BI Finding Amcrest Cams, but not EmpireTech

    So what is the IP and subnet etc for your current network, you can get the info by running IPCONFIG in a terminal window(command Prompt), and what are you putting into the edit screen!
  9. B

    BI Finding Amcrest Cams, but not EmpireTech

    You should be able to just select "Edit" and set a new fixed IP address
  10. B

    BI Finding Amcrest Cams, but not EmpireTech

    I am pretty sure that Zipsort should be able to change the camera IP using the config tool with out changing the IP of his computer!
  11. B

    BI Finding Amcrest Cams, but not EmpireTech

    Did you run the "General_ConfigTool" from EmpireTech, if so what IP does it show for the Dahua camera? The Config tool MUST be run to configure the camera or the camera will not be accessible!
  12. B

    BI - Run as a Windows service option ( login not being accepted )

    I suspect that it will not work with a PIN, you should set up a local admin account and stop using the stupid PIN login, you should be able to convert your PIN login to a local admin account!
  13. B

    Play Exported Recordings From Multiple Cameras Simultaneously?

    I presume that you want to be able to play multiple MP4 files and have them all display time synced with each other, is that correct? I can't say that I have ever come across such a program, but I have never looked either!
  14. B

    Utility for optimizing Blue Iris CPU usage

    How are you doing the remote access, VPN, Windows Remote Desktop connection, etc
  15. B

    Utility for optimizing Blue Iris CPU usage

    What is your current CPU utilization and how many cameras, perhaps you don't need the utility that I don't ever recall hearing about and I have been reading the post for many years? I do recall posts that suggest things that will help reduce the CPU utilization if it is quite high.
  16. B

    Malfunctioning Street Lamp

    Thanks for the clarification, I had gotten the impression that they were not managed from reading other posts
  17. B

    no AI response, but objects detected

    Glad you sorted it out, on occasion there can be problems with the interface between the seat and the keyboard, I am sure that we have all been there at one time or another! :)
  18. B

    Detected HTML5 video player stall. Reopening video stream. (UI3)

    What browser are you using? Have you tried a different browser program to see if it works any better? What is your network configuration? Are you using wireless to watch UI3? Are the cameras also wireless? Perhaps you are causing congestion on your wireless network with too much traffic?
  19. B

    Malfunctioning Street Lamp

    If you look on the AI screen; the second screen capture in your first posting, there is a check box for "Save AI analysis DAT files", that will toggle the saving of the DAT file on and off! That is also the same screen where you can turn on and off the Static object detection! To look at the...
  20. B

    Malfunctioning Street Lamp

    You have the DAT file analysis enabled, what does CAPI detect when the camera is triggered? <Ctrl> double click on the alert image or look in the CPAI log for a recent alert! Hopefully you are aware that the DAT files will eventually file your hard drive storage as BI does not automatically...
  21. B

    Malfunctioning Street Lamp

    So what exactly are you getting for the "50 times each night an alert is recorded.", is it sending you an alert email or just recording, what is being detected by CAPI when the alert is recorded, have you tried unchecking the "Static object analysis"?
  22. B

    Why would eset place these blue iris files in quarantine?

    Here is a link to the remover on the ESET web site, I have never found that any tool can read your windows license key, they all return just a generic key that is time limited and usually only used for temporary use! https://www.eset.com/us/download/tools-and-utilities/
  23. B

    Codeproject AI View Web UI on another machine on network

    To clarify your BI and CPAI systems are installed on the same system is that correct, and you are wanting to access the CPAI web page from another machine, just replace the 127.0.0.1 in the above address with the IP address of the BI/CPAI PC and it should work from any device that is on your...
  24. B

    Troubleshooting Push Notifications

    If you want a complete clean install, do the uninstall as normal, then check the following locations for files, you must be an admin user or know the admin password to do these steps C:\Program Files\Blue Iris 5 - delete folder if it exists C:\ProgramData\Blue Iris - delete folder if it exists...
  25. B

    [tool] [tutorial] Free AI Person Detection for Blue Iris

    This thread has the discussion with the fix for slow downloads, you need to edit the file after the install has finished and failed, then uninstall the failed modules and the reinstall them from within CPAI, read the steps that I did to get it to work in the thread...
  26. B

    [tool] [tutorial] Free AI Person Detection for Blue Iris

    I have three machines that have downloaded and are running 2.9.5 with no problems, if you have a very slow internet connections you may possibly encounter some timeout while installing some of the modules, if that happens I can point you to the thread with how to increase the timeout values
  27. B

    Stop analyzing when confirmed

    I only know what is in the help file, which is were I always look initially, but I would think that the person:080 would override that setting, but that is just an educated guess on my part!
  28. B

    Stop analyzing when confirmed

    If you click the help button you will find this tidbit Hot objects may be specified in the to confirm box to immediately confirm the alert and then cancel any outstanding analyses. For this, the confidence must begin with a 0, such as person:0 or person:080.
  29. B

    Blueiris setup with port forwarding issues- need some help

    I think we are getting hung up on terminology! Obtain an IP address automatically = "Use DHCP" Use the following IP address = "Static IP"
  30. B

    No Signals, Failed to Connect

    So just to confirm that at the moment you still can't access any of the cameras or ping them? What is the make of the cameras and is there some sort of discovery utility for the cameras?
Top Bottom