Search results

  1. F

    Dahua IP Cams change IP after NVR restart or power cycle on the cameras

    @catcamstar maybe this new image will help. I had to manually register the cameras on the switch (D1 - D5) and assign static IPs for the NVR to work with them. What's happen is the camera in channel D5 with a static IP of (192.1.1.54) is changing to a dynamic IP of (192.1.1.16 ) and moving...
  2. F

    Dahua IP Cams change IP after NVR restart or power cycle on the cameras

    I'm having issues with my IP cams changing IPs if they loose power or the NVR is shutdown and turned back on. I have 7 cameras on a NVR5216-16P-4KS2E. 5 of the cameras are connected via a switch that is directly plugged into a port on the back of the NVR. 2 of the cameras are connected...
  3. F

    Camera Placements and Type of Cameras Feedback for my project

    Thanks for the feedback. Appreciate it I’ve done everything you have suggested except trenched and conduit instead of WiFi
  4. F

    Help with Access control on ranch gate with RFID cards

    Have you used Brivio? What Brivio product are you referring to ? Thanks
  5. F

    Help with Access control on ranch gate with RFID cards

    has anyone here set up access control on a single gate that could point me in the right direction? I have a ranch gate that I want to setup RFID cards for my workers so I know who is coming in and out of my yard. I have a NVR5216-16P-4KS2E system and wondering if that can be used for access...
  6. F

    Dahua NVR NVR5216-16P-4KS2E On Amazon

    Not necessarily If all u need is one more you could get a single Poe injector for the last one but think your better off getting a different switch with 8 Poe ports unless the cost is so good on the TP link. I assume you need a managed switch ?
  7. F

    Dahua NVR NVR5216-16P-4KS2E On Amazon

    Depends on what NVR you get and if one of those five cameras can have a cable directly to the NVR. The switch is only to reach those cameras that are not close to the NVR that is assuming your NVR has PoE
  8. F

    Camera Placements and Type of Cameras Feedback for my project

    Thanks @catcamstar Don’t have coverage on the back side of shop at this point. More want the cameras for seeing who is working inside the shop and out in the yard from my desk on a live feed and ill be recording motion as well. Probably will add additional cameras in the future
  9. F

    new from TX

    @catcamstar i finally got my thoughts organized for [SITE A] and made a new post on the camera installation questions area here Camera Placements and Type of Cameras Feedback for my project Hope that clears up any confusion Thanks
  10. F

    Dahua NVR NVR5216-16P-4KS2E On Amazon

    Thanks. Yes I’ll be using him as well
  11. F

    Camera Placements and Type of Cameras Feedback for my project

    Looking feedback/suggestions from everyone on camera placements and camera types (turrent, bullet, varifocal, ptz) for the areas I want to cover in my project. I have done a bit of research and I have a number of things figured out but the camera types I am a little unsure of and I want to make...
  12. F

    Dahua NVR NVR5216-16P-4KS2E On Amazon

    Will the NVR5216-16P-4KS2E allow cameras connected via a external switch and cameras connected directly (home run) to work at the same time ? So 4 cameras on a external switch and 8 home runs. I would assume yes but confused after your statement above. Thx
  13. F

    Dahua NVR NVR5216-16P-4KS2E On Amazon

    @weigle2 Thank You What switch are you using. I need a ePOE switch because I have some longer runs +400ft.
  14. F

    Dahua NVR NVR5216-16P-4KS2E On Amazon

    I’m researching NVRs and looking at the Dahua NVR NVR5216-16P-4KS2E. I found it on Amazon Prime. I wanted to ask the group if they have any thoughts on buying Dahua NVRs on Amazon. Asking because I have read more than one place in the forums to be aware of buying IP cameras on places like eBay...
  15. F

    new from TX

    Okay thanks for your suggestions. Good suggestion @G. Belli
  16. F

    new from TX

    Ha thats funny @tangent I fixed my little diagram and re-uploaded it in the post above. appreciate the feedback @catcamstar ... I was looking more for help on how to get the cameras connected in my shop not so much on the views and direction of the cameras yet. You are a step ahead of me :-)...
  17. F

    new from TX

    Yes I have used the IPVM Calculator and I’ll post that for you as well when I’m back at my computer
  18. F

    new from TX

    If you open the image in its own tab or window by clicking pop out button next the [X] at the top right it will be normal. However I will update that image for y’all
  19. F

    new from TX

    @catcamstar @SouthernYankee @bp2008 and @fenderman I'm stuck on my design for the Shop in my attached Diagram. I have line of site from the [Office] to the [Shop] using Ubiquiti NanoBeams. The Shop is a metal building no air conditioning and of course the temps get 100+ degrees during the...
  20. F

    new from TX

    Thanks @catcamstar I’ll check out the Cam calculator Yes a site to site VPN would be nice. The networking side I am comfortable with configuring (assuming your bandwidths are sufficient, in my case I have low bandwidths at remote sites)
  21. F

    new from TX

    @bp2008 and @fenderman Yes I'm following what you're saying @SouthernYankee. If the machine gets rebooted for any reason then someone will have to go open up new browser instances for each monitor attached correct? A little annoyance but it shouldn't happen very often. I attached a image...
  22. F

    new from TX

    Nothing ?????
  23. F

    new from TX

    Reply’s halted on that question.... After looking over this site I see most of you are using blue iris which is fine but can Blue Iris handle multiple HMDI outs and can I configure each HDMI to view different sets of cameras ? Looking through the handbook and other PDFs but didn’t see much on...
  24. F

    new from TX

    Okay that sounds good. Now what software should I be looking at that can handle this ? Thanks
  25. F

    new from TX

    Gotcha. That’s what I thought but then I thought maybe there was a bandwidth thing with CCTV that I didn’t know about :) Okay we’ll I still want to have the same setup and if the bandwidth is a problem I’ll just have to have NVR at the remote locations for recording and then view the streams...
  26. F

    new from TX

    1. 100+ miles 2. No 3. 2MP - 4MP will be sufficient 4. Yes recording on motion with zones and probably keep a few weeks of footage 5. See above and all internet services are unlimited
  27. F

    new from TX

    at A Up 5-10mbps Down 30mbps at B & C Up 5-10mbps Down 30mbps
  28. F

    New Install over 3 remote Sites with one NVR? Is this a good idea? Thoughts..

    New here and to CCTV and I am ready to do a new install and looking for advise on what equipment/software to purchase that would best fit my project. Lots of options out there and a little overwhelm on who to go with (exacqVision, Axxon Next, Geovision, BlueIris... ). My project is a little...
  29. F

    new from TX

    Hi everyone. New here and to CCTV and I am ready to do a new install and looking for advise on what equipment/software to purchase that would best fit my project. Lots of options and looking for a commercial option not the cheap-o Swann option unless you here convince me otherwise :-)...
View older results
Top Bottom