Search results

  1. copex

    T568A or B?

    if you wire one end 568a and the other 568b you get a cross over cable :-)
  2. copex

    {hep} nvr with ubiquiti ap

    so the wifi is only providing a bridge? none of the cameras are connecting via WIFI try a Scan of the area to see if there are other wifi signals in the area you could also set the Chanel width from 40 to 20mhz and maybe change the channel from auto and hide the ssid if not hidden every thing...
  3. copex

    {hep} nvr with ubiquiti ap

    posting to another forum is not correct etiquette... so how do the cameras connect to the network? hard wired? or wifi? PTP or PTMP bridge? is there any port forwading on the router? from the little information i have from what you have posted i would guess the cameras have been hacked...
  4. copex

    What are these cable/RJ45 cover things called and where can I buy more?

    google "RJ45 Waterproof Connector Cover/Cable"
  5. copex

    Cisco POE switch setup help?

    looks like you got it sorted out :)
  6. copex

    Cisco POE switch setup help?

    are you trying https;//192.168.1.1 or telnet 192.168.1.254 or are you using a console lead in to the console port? did you connect the router to a network with a DHCP server running?
  7. copex

    Blocking IP cameras with firewall rules - Arris NVG589

    you would add a drop rule in Packet Filter Rules using source ip and setting it to the ip address of the devices you wish to block, blocking by mac address would also do the job and may be easier to setup and if the camera went back to dhcp or the ip address was change the mac filtering would...
  8. copex

    CCTV Camera For My Needs - OFFLINE - No Internet Access

    any camera will do but you would have to use a camera and a wifi AP or the camera connected to a network switch.
  9. copex

    HikVision 5.0+: Fatally flawed if used w/port forwarding?

    why do you have all of your cameras available on the internet? how do you access the cameras remotely do you have an NVR?
  10. copex

    Hikvision Hik-connect ivms-4500

    what dose it say when you logon to hik-connect.com? dose you router have uPnP enabled? ( if you have turned off uPnP you will have to open ports on your router ) you only need port 8000 for the ivms app try the Hik connect app Having open ports on your router my be a security risk ( just...
  11. copex

    Hikvision Hik-connect ivms-4500

    you can only connect to one device then you have to share the connect to other devices longing in here may help https://www.hik-connect.com/
  12. copex

    Help need'ed

    just buy a Hikvision camera and plug it in, sell the onvif camera and get some money back. mixing and matching NVR and IPC never works well as most use custom protocols so you are unable to use a lot of the features. as for connecting a camera you will have to set the IPC to a fixed ip address...
  13. copex

    Cameras for a vacant school

    just get IP Cameras that have SD card slots and power locally. but be sure to us lage SD card or the footage may have been over written by the time they get reviewed :)
  14. copex

    Need advice on VLAN for cams

    i would go for the 2 lan options, configure two ports on the switch of for each vlan. on the pc the lan for the cameras assign a static ip address and leave the gateway blank, on the home lan configure the static ip address with a gateway as this will be used for internet access. as long as BI...
  15. copex

    Need advice on VLAN for cams

    i would fit two LAN cards, and have one for the cameras vlan and one for the main network vlan. if you have l2 switches, on l3 switches or using a vlan capable router you would have to setup intervlan routing, but this would allow accesses between both lans and then you may as well leave it...
  16. copex

    Integrate coax video from door entry to Hikvision IP NVR ?

    the door entry my be 480 could possibly be less, depends on the screen size the video is displayed on, so the image quality will depend on how much the video is been stretched, and the quality of the hardware used to convert the video. it will be like you have taken a picture at low restitution...
  17. copex

    Integrate coax video from door entry to Hikvision IP NVR ?

    you could use a converter but a the quality would be poor at best and then the cost, you would be better fitting a new camera at the door above the door entry if you really want the analogue video in the NVR have a reed of this How to Turn Analog CCTV Cameras into IP Security Cameras
  18. copex

    IPcam VPN & network setup

    kinda cool we both provided more or lees the same advice :-)
  19. copex

    IPcam VPN & network setup

    ok google "what is my ip"..... this will return you public ip address. turn the router off for 5 mins, turn the router back on and again google "what is my ip" if the number is different then your isp provides a dynamic Public address, if the address is the same then you may have a stick...
  20. copex

    Hikvision DS-KB6003-WIP Wi-Fi Doorbell chime?

    No . i would have sent mine back but it sat on a desk for to months before i found out how bad the device is, just keep hoping for a software update
  21. copex

    Hikvision DS-KB6003-WIP Wi-Fi Doorbell chime?

    you will have to use the hikconnect app to connect the divise to the wifi & upgrade the firmware, after this you can close the app and never use it.
  22. copex

    Hikvision DS-KB6003-WIP Wi-Fi Doorbell chime?

    mabe they will fixit in the next update, i get the same issue, it works about 20% of the time when he app is open :-) the issue for me is i have UPnP disabled on the my router :-(
  23. copex

    Sourcing Hikvision in UK.

    PM me :-)
  24. copex

    Hikvision DS-2CD2x32-I (R0) brick-fix tool / full upgrade method / fixup roundup.

    finally got round to upgrading 2 camera, just wanted to say thanks
  25. copex

    Hikvision Nvr "Behind" Second Router

    it maybe down to the port configuration. (turn of UPnP on all of the hikvision equipment and disable it on the router as well. ) if you are only have one public ip then the ports on each NVR must be different :-) you may have already done this :-) for ivms i believe the only port required is...
  26. copex

    Hikvision Nvr "Behind" Second Router

    then from the above you don't need two routers use the PTP link to extend the network from the internet router, if the second router is say providing wifi then set the second router to a spare IP on the same address range as the main router turn off dhcp and move the Wan connection to a Lan...
  27. copex

    Hikvision Nvr "Behind" Second Router

    why do you have two routers?
  28. copex

    Hikvision DS-KB6003-WIP Wi-Fi Doorbell chime?

    the voltage on my doorbell is 20vac and i have a 8vac door chime in line and works with out issue :) Now if it used VDC then you would have to obey the voltage but with VAC the output of the transformer will be different for everyone as it is dependent on the input voltage in the UK this can be...
  29. copex

    New DNS servers on 1.1.1.1 from Cloudflare

    atm they seem quite fast, see how they go over the next few months....
  30. copex

    How to tell if MY internet is down?

    may help .... Uptime Robot