Search results

  1. ARAMP1

    5.2.7.0 - RTSP sub-streams for high-MP cameras

    Well, I was making that harder than it needed to be. Thanks. Wow, that dropped me down from around 30% to 1%. :wow:
  2. ARAMP1

    5.2.7.0 - RTSP sub-streams for high-MP cameras

    Okay, I'm clearly doing something wrong in my setup after downloading 5.2.7.1. First thing I did was go into the cameras and set up the substreams at 6 FPS. Next, I enabled multicast. Then got my Mainstream and Substream addresses and ports. Next, I went into Blue Iris and for each...
  3. ARAMP1

    Adding a New Camera Maxes Out My CPU

    LOL...say no more. Cleaned up my storage situation and added it...everything works as expected.
  4. ARAMP1

    Adding a New Camera Maxes Out My CPU

    Kind of baffled here. I have 6 Hikvision DS-2CD2085G1-I cameras with a few other ones on my system running anywhere between 25% and 40% depending on whats going on. I added another DS-2CD2085G1-I with the same (latest that I could find) firmware. All settings are the same. BVR direct to...
  5. ARAMP1

    pfsense and BI - multi LAN or multi NIC?

    I use pfSense and have separated a security VLAN for the blue iris computer and all the cameras. As far as organization goes, I have my cameras addressed as 192.168.30.XX with them all being on VLAN 30 and XX is 10s, 20s, 30s, etc based on where their location is (front door, garage, side of...
  6. ARAMP1

    DS-2CD2T85G1 vs. DS-2CD2085G1

    Is the difference just from factor? In what application would one be chosen over the other?
  7. ARAMP1

    CPU Usage 100%

    Well, a couple of things. First, I was recording everything to an M.2 SSD. That in turn was copying over to the WD purple drives. I eliminated the middle man and am now just recording straight to the spinning hard drives. I don't think that really hurt anything, but I didn't see any...
  8. ARAMP1

    CPU Usage 100%

    I had a similar problem i9-9900K pinging 100% WAY before it should have. Even after updating all the drivers, etc. For me, it turned out to be a storage allocation problem. Here's the thread on it. Hi CPU usage after latest update
  9. ARAMP1

    One Of My HardDrives Keeps Disappearing

    The drive was connected to a SATA port on the motherboard. Nothing in the event logs. I had a spare LSI SAS card, so I ended up swapping all the drives over to it. It's running fine now. I'll leave it like this and if it messes up again, I'll probably just toss the drive. The harddrive is...
  10. ARAMP1

    One Of My HardDrives Keeps Disappearing

    Everything checks okay, though I've only run the check after re-assigning a drive letter and while everything looks okay.
  11. ARAMP1

    One Of My HardDrives Keeps Disappearing

    I'm not sure this is a Windows problem or a Blue Iris problem or something else, but maybe someone knows what's going on here. I have a dedicated Windows 10 PC running Blue Iris. Currently, I have five 4TB WD Purple drives and one 2TB WD Purple that the cameras are being recorded to. The 2TB...
  12. ARAMP1

    Hi CPU usage after latest update

    I have a 10GbE network at the house and often transfer large files between servers/computers/etc. The only way I see the full transfer speed on my network is if I transfer from SSD to SSD. If either ends have a spinning hard drive, the transfer times are doubled. Using that same logic...
  13. ARAMP1

    Hi CPU usage after latest update

    I was seeing a small increase in CPU percentage...around 10-15% when clips were being moved.
  14. ARAMP1

    New modem has same ip as camera network

    You can use whatever you want. My main network is on a 10.10. My guest network is on a 172.16. And, all my stuff is on a 192.168. If you really wanted, your router should have the ability to create VLANs. I set up a separate "Security" VLAN with restrictions so the cameras dont have...
  15. ARAMP1

    Hi CPU usage after latest update

    The drive is fine. Everything worked as advertised after it was cleared. It had something to do with the allocation of space or how I had the storage setup. Once it reached whatever limit I had set, it crapped out. Right now, I have everything recording to my stored file on a WD Purple and...
  16. ARAMP1

    Hi CPU usage after latest update

    I have a 250Gb M.2 SSD that Windows and BI are on. The 1TB M.2 SSD was just being used for recording.
  17. ARAMP1

    Hi CPU usage after latest update

    It was a new build, so new motherboard, CPU, RAM, hard drive and copy of Windows. It's definitely a storage issue. After re-formatting the drives and having it save to clean drives, it's been running like a top since yesterday. I even upped all my cameras from 15 fps back up to 20 fps. (CPU...
  18. ARAMP1

    Hi CPU usage after latest update

    After doing that, the storage picture looks much better. These are pretty much all new cameras from when I was using BI4. I've already done a new install once of BI. Windows is a new build as of a month or so ago. Right now, it's running well with all the free space, which leads me to...
  19. ARAMP1

    Hi CPU usage after latest update

    LOL. No kidding. That's what made me come to BI in the first place. (although it was a cheap one)
  20. ARAMP1

    Hi CPU usage after latest update

    Here's my storage setup. I've tried the "queue for export" box clicked and not clicked with no noticeable difference.
View older results
Top Bottom