Search results

  1. D

    SD22204T-GN Firmware Update Issue

    Thank you Errrr. I’ve updated my camera with this 2017 firmware. I’m sure this will be the final update produced for my 2015 camera. Not fully tested yet but it seems to be working OK except it has the same limitation as the 2015 FW in that it is not recognised in Blue Iris as a branded...
  2. D

    SD22204T-GN Firmware Update Issue

    2015-06-07 file attached. Actually, having at first being pleased with this firmware, I've now discovered that it still has some of the problems that I thought were introduced when I updated to the 2016-05-17 firmware - although on the good side the camera doesn't hang. Consequently, I would...
  3. D

    SD22204T-GN Firmware Update Issue

    I had previously loaded the cam with defective 2016 firmware but the v2.400.0000.4.R.20150607 sent to me by Kitsap works perfectly with my 2015 cam. I have already thanked him. RyanMM take note!
  4. D

    SD22204T-GN Firmware Update Issue

    I think there may be confusion about the hardware version. Tinman’s older version is 2018 whereas RyanMM and I have the older still 2015 hardware. We still need the 2.4xxx 2015-06-07 firmware.
  5. D

    Triggers with new zones/sources

    I’ll be interested to see how you get on with this feature kaltertod. I did check out BI’s help file but it didn’t help me. I was hoping that fenderman would take a moment to reply - he knows everything!
  6. D

    Triggers with new zones/sources

    Thanks for the idea jrbeddow although I have previously tried checking “Begin analysis with motion-leading image” and it didn’t seem to overcome the fundamental limitation of restating the pre-trigger time. I’ll check again.
  7. D

    Triggers with new zones/sources

    Yes kaltetod, I guess a clone could be configured to do the same thing. Thank you. I would still ask, though, is there any point in having “Triggers with new zones/sources” for a camera already in a triggered state if the pre-trigger time blocks the AI?
  8. D

    Triggers with new zones/sources

    I’ve tried out the Alert_When_“Triggers with new zones/sources” is selected instead of “New triggers only”, the reason being that the current version of CPAI still occasionally erroneously reports “Nothing found” and I thought that, when viewing confirmed alerts only, selecting this function...
  9. D

    Have broken CP.AI - help please?

    Hello kaltertod, many thanks for your helpful reply. I haven’t yet found the solution but am working on it. I realised that the .onnx modules had not extracted, presumably because the file BITE67 had a .tmp file extension instead of .zip. So I was able to change and extract. I hadn't ever...
  10. D

    Have broken CP.AI - help please?

    I have been happy with CP.AI for some time but saw a recent post suggesting that YOLOv5 6.2 is more accurate than YOLOv5 .NET, especially having a T600 with CUDA11.7. So I uninstalled CP and reinstalled but now it doesn't work with either and I don't know how to fix it. Example below why I...
  11. D

    How to re-install Blue Iris

    Oh yes wittaj. Bugger! Many thanks for the reason.
  12. D

    How to re-install Blue Iris

    Although Blue Iris was working fine, it was no longer starting CP.AI and so I decided to uninstall and then reinstall both. I also deleted the folder with the .exe back copies. Having uninstalled them, I can't find a link to download and reinstall Blue Iris without a new purchase. I have a...
  13. D

    CodeProject.AI Version 2.0

    It’s bingo for me with the latest BI update. CP.AI was not online with the last two or three BI updates, BI reporting nothing found but as if by magic it’s working again with 5.6.9.6 (no other changes apart from CP.AI 2.07 that didn’t fix it with BI 5.6.9.5) Now to mess with the models and...
  14. D

    CodeProject.AI Version 2.0

    I have the same problem - a long copper overhead line. Openreach intended to upgrade it to fibre over 18 months ago for free but when they hit their 80% target in Congleton they moved on. Now it’s 2025. Are the ISP’s offering to install fibre for you for a price? If so, what is the price...
  15. D

    Blue Iris and DeepStack ALPR

    Very interesting links wittaj, thank you. I guess what was at the back of my mind in my post was, putting alpr to one side, that the software has the capability to crop and use a portion of a full res image to deliver a more accurate image comparison analysis - any object in motion (as was...
  16. D

    Blue Iris and DeepStack ALPR

    I haven’t started to learn about alpr and will wait until codeproject.ai alpr has been released but can’t resist asking one question now about resolution and processing time:- We are encouraged to uncheck ‘use main stream if available’ because resizing megapixel camera images to send through the...
  17. D

    5.5.8 - June 13, 2022 - Code Project’s SenseAI Version 1 - See V2 here https://ipcamtalk.com/threads/codeproject-ai-version-2-0.68030/

    Good point digger11. I guess there may be two problems doing this - firstly, at least on my system, the box drawn around the motion may not be synchronised well enough with the moving vehicle and secondly, would doing this would use too much CPU time? I suppose the reason why the cropped image...
  18. D

    Memory utilisation

    Didn't get too far actioning anotherone's message until I updated BI and noted the non-paged pool and overall memory utilisation is now far less. I also noted that, according to 'Processes' in Task Manager, adding together all the memory used by tasks is less than 2.5GB - very much less than...
  19. D

    Memory utilisation

    Oh OK thanks anotherone. Having extremely limited IT knowledge, I’ve entered your cause into my browser for guidance on how to fix it. Fingers crossed but not super confident.
  20. D

    Memory utilisation

    I appear to have most of my memory in use even though it doesn't seem to show up being used by individual tasks. Recent BI updates have included solving memory leaks. Is this likely to be related or completely different? I am (obviously) not an expert. Rebooting the PC initially reduces the...
  21. D

    CCTV Running Cost - Electricity

    Here in the UK, the price of electricity has risen sharply and will continue to rise. This has prompted me to measure my CCTV system's power consumption and calculate how much it will cost to run over the year ahead. My system has grown over the years, now comprising:- Blue Iris PC - headless...
  22. D

    5.5.8 - June 13, 2022 - Code Project’s SenseAI Version 1 - See V2 here https://ipcamtalk.com/threads/codeproject-ai-version-2-0.68030/

    Picking up on the remark by jrbeddow, here is an example of the difference between different AI models this afternoon:- Few things in this world are absolutely perfect.
  23. D

    5.5.8 - June 13, 2022 - Code Project’s SenseAI Version 1 - See V2 here https://ipcamtalk.com/threads/codeproject-ai-version-2-0.68030/

    Yes, cferd5, I do have Also re-triggers checked. Maybe when I was getting nothing found before the wanted object appeared it was then not checked. Unfortunately I'm old and can't remember.
  24. D

    5.5.8 - June 13, 2022 - Code Project’s SenseAI Version 1 - See V2 here https://ipcamtalk.com/threads/codeproject-ai-version-2-0.68030/

    Ok cferd5, thanks for doing a test, replicating my findings. I was also able to replicate your settings, with nothing found showing only in the cancelled alerts list when I enter labels in To confirm. For me, though, the disadvantage with populating the To confirm box is that I want to confirm...
  25. D

    5.5.8 - June 13, 2022 - Code Project’s SenseAI Version 1 - See V2 here https://ipcamtalk.com/threads/codeproject-ai-version-2-0.68030/

    ??? Read #966 Hi cferd5 You made me look again at my example in #968 and notice I had chosen one that was complete rubbish. Sorry and thanks for that! Here's a better example showing that nothing found is in the confirmed alerts list when To confirm is empty. Another error - looking again...
  26. D

    5.5.8 - June 13, 2022 - Code Project’s SenseAI Version 1 - See V2 here https://ipcamtalk.com/threads/codeproject-ai-version-2-0.68030/

    Hi jrbeddow, others will know that I am definitely not an expert and I welcome every time I'm proven wrong - it's all part of the learning process. In this case, my rationale is as follows:- 1. Back in the DeepStack days, I think I was the first to use "banana" in To cancel, since used by...
  27. D

    5.5.8 - June 13, 2022 - Code Project’s SenseAI Version 1 - See V2 here https://ipcamtalk.com/threads/codeproject-ai-version-2-0.68030/

    Having the up-to-date BI and CP.AI, I've been experimenting with the different custom model folders. This works best for me:- For cameras including vehicles, I also "Mark as vehicle" with car,bus,motorcycle. I have very sensitive (simple algorithm, short minimum duration) trigger...
  28. D

    5.5.8 - June 13, 2022 - Code Project’s SenseAI Version 1 - See V2 here https://ipcamtalk.com/threads/codeproject-ai-version-2-0.68030/

    Mike, there's been lots of correspondence about model accuracy. I'm getting good results with your ipcam-xxx and would like it to be as good as possible. Hence queries: ipcam-combined has both general and animal labels but seems to deliver slightly lower confidence percentages and have longer...
  29. D

    5.5.8 - June 13, 2022 - Code Project’s SenseAI Version 1 - See V2 here https://ipcamtalk.com/threads/codeproject-ai-version-2-0.68030/

    OK biggen, that seems to have fixed it. Thank you. I notice that this makes “Use custom model folder” (checked) greyed out, but I’m not aware of that being a problem. It is a bug, though, not to start via BI and should be corrected.
  30. D

    5.5.8 - June 13, 2022 - Code Project’s SenseAI Version 1 - See V2 here https://ipcamtalk.com/threads/codeproject-ai-version-2-0.68030/

    Yes me. “Auto start/stop with Blue Iris” is definitely checked but I have to press the “Start now” button after a reboot. Was OK with version 1.6.2
Top