hi guys I am wanting to buy the hikvision ds-2cd2532f-model camera
can someone please tell me will the mic work over the poe cable on its own or do I need extras
all I want to do is listen to any voices or noises when watching playback thanks
Please help
Hi guys can someone please tell me how to connect the nvr the correct way
make it simple for me please don't really understand computer talk,
just need to know what lead goes where so I can remote view and change camera settings
nvr is kikvision 7608ni-e2/8p with built in Poe...
hi guys i have the 7608ni-i2/8p with built in poe switches
my nvr changes camera settings on its own, is there anyway i can stop this for happening ???
Okay I'm not sure how to connect it to nvr just yet
will I have to change ip addresses when it's connected to nvr
i have spare ports
when you start mentioning lan and all this other computer talk it all goes out the window
I need simple instructions
like cat 6 cable from pc to nvr port or...
So many different settings here if you know if anything else I should change please let me know
auto switch ?
exposure settings?
day/night switch ?
back light switch ?
white balance ?
image enhancement?
video adjustment ?
once I work out how to get to settings from nvr
I will be able to watch...
I have finally opened it mel 3:20 am here
I thought I'll give the router thing a try like you mentioned all I had to do was plug it into the router the whole time
makes a lot of difference when I have asked people previously
and finally found the extra settings
well I will have to change...
Didn't look for anything saying IPv4
and the way I connected wasn't into router
I powered it up with 12 volt power supply and plugged the camera straight into the side of the laptop pc
the IP address I changed it to was 10.0.0.32 is that the correct address ?
I also Didnt do anything in the...
3 hours mucking around I still can't open the camera settings
I changed the camera ip to 10.0.0.32 and it don't want 2 open
I've managed to do everything else you have said and its worked
those insect things have nearly disappeared, once the noise has been adjusted I'm sure it will be good...
Yes it did try that connection
Ok I'll try connecting without sadp
pretty sure I have always tried with it open
won't be for a couple hours tho
thanks again mel
I don't think I have virtual host
I tried opening camera again but it didn't wanna open
and when I plug camera direct to pc it won't find it cause camera needs power supply
i have had camera on the bench with a power supply and it shows up on pc
but it just didn't want to open
I will try to...
I have tried that a coupe of times,but couldn't get into the settings when doing it that way,but i will give it another go
what I have done previously
I have pluged the camera lead straight into the pc with sadp open
then camera shows up where I have changed IP address previously
then I have...
Just know when picking your cameras choose the right mm lens,if you want to see licence plates you should go for a 6mm lens unless your cameras will be close to the road then you could use a 4mm
i have ds-2cd3345i
im no expert either
Hi mel I access camera thru pc I can not find any of the settings we have talked about on the nvr
and I can't find anything saying noise in the settings
Hi mel thanks for all this help
I have turned up bit rate from 4096 to 8000 for all 4 cameras and frame rate down to 15 they were ok so I went to 20 and they are still running 2x2
now I have turned 2 cameras back up to 1080 and its still going
i can't find where to set the noise
And I won't...
Hi mel ok I got it working 2x2 when I turned res down thanks for that
but now I've noticed there a like insects flying around on the monitor when watching live camera view,but they aren't actually insects it's something to do with cameras or nvr,so. Now it's continuous recording instead of...
I can't get into camera settings don't know if I'm doing anything wrong so i can't change res settings/ nvr is a Chinese mdl ds7608n-e2/8p firmware is v3.3.4. Build 150616 nvr is not connected to Internet either
if you can tell me how to check camera settings would be great from start to...