Search results

Yeah I have the firmware,it's just the app I need to update it. Thanks

Ive just bought a hikvision 1005KI usb joystick and would like to upgrade the firmware. Reading the manual it says to use buttonboardemo softare. I cant seem to find this software or if it exists? Does anyone know how to upgrade the firmware on these PTZ joysticks? Thanks

Thanks Yeah i have checked this but id of thought this would be a setting on the NVR itself rather than the camera?

Hi all, Is there a setting on the NVR (I-series) which will allow you to change the dwell time for a preset?. Ive looked but can't seem to find anything. I have a PTZ camera and currently have it set so that when one of my other cameras detects line crossing the PTZ flick to the preset i have...

Ive just bought a few c500's as they were going cheap on prime day. Can these be added to a hikvision NVR on their stock annke firmware using the hikvison protocol not using ONVIF or do i need to flash them to the hikvision firmware for them to work? I have flashed one but found its lost...

I use Hubitat and miss having my doorbell integrated into it with my reolink. I previously had a nest and it worked perfectly, turning on my porch lights when an visitor arrives + announcements on my sonos. It's the one thing missing for me and a shame there's no integration and i don't think...

Is the lag only there when viewed through your NVR? I had this problem with mine connected through my hikvision NVR it wasn't anything to do with the doorbell. I had to change the FPS and bitrate on the NVR itself and the lag went away.

Ok thankyou. I plan on pulling a plastic conduit down first and then run all the cables in that. The HDMI cable I can run that elsewhere so that's not a problem and could leave that out but ideally having 4 x cat6 in a conduit would make my installation alot easier.

Hi all. Im UK based so not sure if its different elsewhere but i have a soil stack pipe which run from my kitchen up and out the roof which is housed in a box section (2ft x 1ft). I have my NVR + POE switch located in the loft and would ideally like to run 4 x cat6 cables and an HDMI lead...

Im going to try this later today and I'll update the post to see if i have the same problem. Do you have the doorbell on the same IP range as your main cameras 192.168.254....... ?

I might have to try that. I have mine connected to a Poe injector and then into my router not connected directly to the NVR

Yeah I have one of these working with my 7716NI-I4 NVR, only really use it for local viewing and works fine. I've not managed to get it recording apart from continuous. I didn't think this was possible? Are you connected directly to the NVR's POE ports or running it through a separate switch...

Ive just received an OEM version of this camera from Aliexpress, It's called a DT387G2P-LSU/SL. I upgraded the firmware straight away to the official latest from the portal and seems to work fine. Im guessing this is the exact same model as the 2CD2387G2P-LSU/SL and has the same features just...

I currently run a 1st gen nest hello which has worked great since i installed it a few years back. I plan on upgrading to the POE version of this purely for the ONVIF support with the plan of adding it to my Hikvision NVR. Im not fussed on having any motion detection which im guessing is not...

Im thinking of buying one of these but would like to see one of these displayed locally on an external display. Viewing one of these on a 2x2 split with the panoview spanning the top 2 by creating a custom split. Is this possible and does it perfectly span the split view?

Hmm is that possible then? If so saves me buying a switch but I thought it wasn't. I want to use my cameras as effectively motion sensors with my HA I notice looking through the NVR,s settings there's an option to change the internal address from the default 192.168.254..... but I've didn't...

Ive just upgraded to a hikvision DS-7616NI-I2/16. Is it considered best to power my 9 cameras via the built in POE ports or a separate POE switch. I want to integrate my NVR with home assistant but this isn't possible using the built in ports as it need to be on the same network as my HA...

Hi all, On the front of my house i have 4 darkfighter cams. Im thinking of replacing one of them with a Gen2 colorvu camera. Will there be any issues from the IR leds on the non colorvu cameras affecting the image on the colorvu? Many thanks

How do the c500 Annke's perfrom with the hikvision firmware? Are they decent quality ? Is this the correct firmware for them...

Thanks yeah it would be under a cover but there's a chance it could get wet. I only ask with regards a cover of some sort after seeing a fair few 3d printed covers available for wyze cams over on thingverse, A few I've used myself previous with no problems . I just wondered on whether anyone...

Ok thanks guys, Ill probably sell a couple and get an outdoor WiFi model.

I have a few hikvision indoor cube cameras spare at would like to use one outdoor. Does anyone know of any 3d printed housings or shields available for the cube series cameras to protect them from the elements? Thanks

Ah thankyou very much that worked. I was setting the IP to the NVR's POE not my NVR ethernet Thanks again much appreciated

Thanks for this, Yeah my NVR ( DS-7716NI-I4 16P) how do I set the WAN port or do you mean the network the internal POE is set to. 192.168.254....... If I go into the cameras config. I have the WLAN port set to the POE network that my NVR uses(192.168.254.001) and SADP detects it so I know its...

I currently use a 16 port I series NVR and run all my cameras through POE . I'd like If possible to add 2 hikvision cube indoor cameras which have WiFi and use WiFi + power adapter rather than POE. Is it possible to use a WiFi camera and view it on a hikvision NVR? I'm using the NVR's buil in...

Hi all, Sorry if this is a simple thing which ive missed....... Ive bought a DS-2DE4A225IW-DE which is my first PTZ camera and ive set up 5 presets in the PTZ menu and all i want to do is switch between the presets but without seeing the camera panning from one to the other. Is this possible...

I'm looking for a PTZ joystick for with my 7716NI-I4 NVR. The NVR has RS232 serial, 485 and USB connections. Looking on Ebay I've found various joysticks like this. Mini PTZ Controller with 3D Has anyone got one of these or similar and do they work with Hikvision NVR's? Thanks

After more testing it does seem the hdmi is dead . I have bought a VGA to HDMI which works fine but I ideally need to use both the VGA and HDMI ports. I'm thinking of replacing the NVR and maybe sell this on with a faulty port. Can anyone tell me what's the difference between the K2 and I2...

By a 5v 2.0 amp power adapter

No , no lightning strike or anything