Search results

Installed the latest fw as suggested. Tried with edge ie mode. In getting live view but no playback.

It is the DS-7608NI-I2

I have a strange issue here, its a 8ch NVR without, with latest fw V4.61.025 build 220905 All cameras are added, live view is OK. All are in same network. The nvrdevice is added to the cloud, on mobile i can live view, playback etc. I have also done a portforwarding ( 8000 ) I can live view...

Yes same bracket, you can leave the excisting plate. Just replace the unit

I have some recorders, which i login to by using their WAN ip. Sometimes the WAN ip of that location changes, in that case i could add the serial number of the device to Hik connect, and it showed the new ip adress, however since a few weeks i think. this is not possible anymore. I know there...

The V4.71.005 build 220524 is buggy, I have seen several NVR now, 32ch 7732 models, which stopped recording for no reason. Not possible to view records, Time is ok, storage is OK. Besides of that, no audio worning for record exception . Tried building video option, did not work.

So the thing is actually, on the CLIENT pc, you have to add the devices too, as if you are adding them normally, Then add the streaming media server ip adres. Export the sertificate from client, import it to the other pc ( which has the server running ) Then after you reboot the client pc...

Hik connect has updates almost each week. The app is very bugy .Many complains, many 1 stars these weeks. check the playstore. I am really dissapointed. Loading of cameras take much longer, playback is buggy, crashing etc. .

It is not possible to set PRIVACY MASK on this camera.

Hi. I have 3 cameras, which are connected to an Hikvision DS-7616NI-K2/16P nvr, latest firmware: V4.72.107 build220914 The motion detection tab is not available. What i have tried: Upgraded the camera's and NVR with the latest available firmware Factory reset the camera + NVR. Tried...

Onvif is enabled with this firmware by default, later with new firmware, they added the option to enable onvif / create onvif user etc. but with the old version with youhave, its just enabled. the user is admin, and passw should be the camera password. I would strongly recommed to upgrade, of...

Hello, i have encountered this on 3 different locations. As well as theNVR and cameras, have the latest fw. We have set names in OSD from the NVR webinterface. However after a while, many of the camera names, have been back to default like '' ip camera 01 ip camera 02 etc. The cameras have not...

as far as i know, app password is also not working anymore.

Have you tried using APP password ? i know that hikvision did a change some close time ago.

Get the latest version of ivms.. as above 3.9 , then you will see device management

But what if the down and up speed on location is max 80 / 80 I was thinking the 1000 mb is only for inside flow bandwith ( the max communication between local devices /

Lets say we have a nvr ( hikvision ) 32ch with 16 poe , all cameras are connected to built in poe ports of nvr( 16pc ) Does it make any difference connecting the lan port of nvr with 100 or 1000 mb??? When cameras are connected using poe switches then it could be good as i know.

Unfortunately no.

That wont work. The mentioned outdoor unit is not working standalone. And when you do what you wrote, then the LAST linkage will rule. so other 3 will not receive any call. You need an indoor unit in order to receive hik connect call.

Hi, i want to list some points, which are very annoying - frustrating for me. It might be that i might be wrong, if so please let me know / advice On remote, you cannot LOCK file, like you can on gui interface ( in order to backup them later ) When device is added to cloud ( hik connect ) and...

Hi. As far as i know, is when you are using an standalone doorbell you HAVE TO add it to cloud account, or you will receive calling failed ( as the bell has nowere to call ) When you have an indoor unit, its not neccessary for connecting hik connect. In this case also check device management of...

Hello, i need advise on following, hope i can get suggestions here. I have 8 different locations , with 8 channel NVR devices ( Hikvision - Dahua Mixed ) All locations have very good Upload speed ( minimum 300 mb ) I want to hire a VPS server or VDS. Install a software ( Maybe ivms for...

Use internet explorer, or Edge in IE mode. make sure to uninstall webcompnents, and reinstall again

In this case. Does the server have to open ALL video streams ? Which is nearly impossible in my case ( due to memory / processor shortage)

Hi all. So here is the situation: We have 2pc DS-8664NI-I8 NVR ( 64 ch without POE ) Alle camera's connected to Gigabit POE Switches in the same network. and added to the NVR's There are several rooms in the building, where we want to View the images. In some places Quad view , other places...

No, it doesnt. Records are saved in HDD. And logs are saved in Cmos battery So if you factor default + format hdd, the logs will be still there

Hi, i am making an digital catalog. I need many Hikvision product pictures in 600x600. its much work to download pictures one by one. Is there any .zip download link available, with product images of hikvision, with at least 600x600 or higher ( i can bulk convert them with software ) I am...

If ip camera does not show on bnc. Output. Try fw upgrade. I remember they added this later. To change bnc view go to configuration..live view...view. ( has to be set from tv or monitor NOT Internet explorer.

You have created an hik connect account. Signed in with this account... and added the outdoor unit to your account ? Then enable push notification. Also get the latest firmware.V2.2.51_210630 Protocol2.0

I remember this was fixed with new fw. But your fw seems alrdy pretty new. So i dont know then what it couls be