Search results

I put my existing gateway into Bridge Mode and added an ASUS router and email now works fine from the camera's using virtual host and a static route. Thank you Alastair for all your help.

So I've been able to get an SMTP relay working on my NAS and can send email from my phone via the relay but the NVR still fails "Testing Failed" I have tested NTP with the IP of my NAS time server and that works but email doesn't. I have it setup as simply as I can e.g. no mail encryption and...

I spoke with some techs from work and the issue with the modern is not solvable without putting it into bridge mode and running a seperate router, given we are close to changing to docsis 3.1 I'll be due for a new modem soon

Would running SMTP forwarding on my Synology NAS help to resolve this issue.

I found this which applies to my modem but I struggle to understand if a) its the reason and will help 2) how to implement iii) sequences Netgear C6300BD Guide to Setup Static Routes on Telstra Gateway Max C6300DB Purpose This guide will describe how to workaround a setup for static routes...

So on my PC on the normal network: ipconfig /all IPv4 Address. . . . . . . . . . . : 192.168.0.7(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.0.1 DHCP Server . . . . . . . . . . . : 192.168.0.1 DNS Servers . . . . . . . ...

Hmmm realised that I missed the tracert and went back to repeat the process and got a different outcome for the first test. Let me run these tests again and re-record the results. The main difference was for the first test results were the same as test 3.

Do you want a Wicked Wango card?

ok let's play Bamboozel.... Baseline test PC using DHCP 192.168.0.7 IP 255.255.255.0 SN 192.168.0.1 GW 61.9.134.49 DNS1 61.9.133.193 DNS2 I set the PC to 192.168.0.7 IP 255.255.255.0 SN 192.168.0.1 GW 192.168.0.1 DNS1 8.8.8.8 DNS2 and 192.168.0.7 IP 255.255.255.0 SN 192.168.0.1 GW...

Great idea I'll try that

I tried to enable SSH (Is SSH or telnet available in 5.4.5?) but get connection refused when I try and SSH to it. I had a look through the entire console and couldn't find anything like a ping or trace that might help.

When I turn v-control off I can no longer access the camera via 192.168.254.2 but can when I turn it back on so that seems to be working.

Can I not get email working on a POE camera then?

Surprisingly that didn't work, using the IP address for both the NTP time (time.windows.com / 52.166.120.77) and email server address (smtp.gmail.com / 74.125.23.108) achieved the same result. Failed to connect the test server! To summarise: Network Gateway IP 192.168.0.1 NVR LAN IP...

It does sound like a DNS issue which results in the test not being able to connect to either the NTP or gmail server. If I run a tracert for smpt.gmail.com and then use the IP address instead and it works would that confirm that I have a DNS issue?

When I use my own local time server it works but time.Windows.com doesnt

As DNS I tried 8.8.8.8, 192.168.01 (router) and the NTP test with time.google.com does not work, failed to connect to test sever

So I've tried two different Camera's DS-2CD2335-I with V5.4.20 build 160726 DS-2CD3345-I with V5.3.9 build 160612 and I've tried two different emails gmail and yandex and they both yield the same result.

So that works as I can access the Camera from 192.168.254.2 but the email still doesn't work. Still getting Failed to connect the test server hmmmm older firmware due to it being a hacked camera. Maybe that's the issue not the network access?

I’m trying to configure one of my camera’s to email photo’s when an event is triggered. I have this successfully working for a WiFi enabled camera that is on my main LAN but am having issues with getting it working for one of the PoE camera’s sitting on my NVR. I have enabled Virtual Host and...

Cameras are working perfectly and can confirm that installing an access point to the nvrs Poe port works perfectly.

I have tried it with a ADSL router acting as an access point connected to one of the PoE ports and got three wifi cameras; 2 X Wanscam and one hikvision cube streaming to the nvr so I can confirm it works but then the above problem occurred and I went back to a simpler setup to enable easier...

Great suggestion, got them setup and I'll test for a few days and see how we go. Ideally I'd love to put these on a Wifi network connected to one of the PoE ports on the NVR and use its IP range in the hope that they are better protected from the internet and will allow me to view using the...

I'll respond to my own question. Palemoon Portable with the contents of the \ProgramFiles(x86)\Webcomponents director copied into \Palemoon\lib\mozilla\plugins directory and the \Palemoon folder works perfectly and doesn't require admin privileges.

I bought a couple of cheap Wanscam HW0026 camera's to use inside to monitor my dog when we are not home, the camera's work flawlessly and the night vision is surprisingly good. Using TinyCam Monitor and Onvif Monitor the stream is perfect. The only issue is when I add them to my Hikvision NVR...

Does anyone know how to create a portable version of Chrome or Firefox with the web components plugin preloaded? I'm fine at home because I can use whatever I want but at work I don't have admin privileges so I can't install the webcomponents.exe, and thought that using a portable version would...