I’m trying to configure one of my camera’s to email photo’s when an event is triggered. I have this successfully working for a WiFi enabled camera that is on my main LAN but am having issues with getting it working for one of the PoE camera’s sitting on my NVR.
I have enabled Virtual Host and am able to access the camera’s via the NVR’s virtual ports e.g. 192.168.0.150:65001 but I can’t get email to work from the camera (192.168.254.2). As suggested in a number of posts I have tried to configure a static route in my router to enable this but I’m not 100% sure it’s configured correctly.
Network Gateway IP 192.168.0.1
NVR LAN IP 192.168.0.150
NVR PoE IP 192.168.254.1
Static Route that I configured on my router
IP Address 192.168.254.0
Subnet 255.255.255.0
Gateway 192.168.0.150 <- is this right?
But I also tried Gateway as 192.168.0.1
In both cases I still get an error that the Camera is unable to contact the test server when testing the email setup.
The camera’s network is configured as.
IP 192.168.254.2
Subnet 255.255.255.0
G/W 192.168.0.1 <- is this right?
I tried running a tracert 192.168.254.2 but it failed after reaching 192.168.0.150 which seems to indicate I've configured something wrongly but I'm not sure what. The other threads on this topic bounce around so much that I wasn't clear on what the final solution was.
I have enabled Virtual Host and am able to access the camera’s via the NVR’s virtual ports e.g. 192.168.0.150:65001 but I can’t get email to work from the camera (192.168.254.2). As suggested in a number of posts I have tried to configure a static route in my router to enable this but I’m not 100% sure it’s configured correctly.
Network Gateway IP 192.168.0.1
NVR LAN IP 192.168.0.150
NVR PoE IP 192.168.254.1
Static Route that I configured on my router
IP Address 192.168.254.0
Subnet 255.255.255.0
Gateway 192.168.0.150 <- is this right?
But I also tried Gateway as 192.168.0.1
In both cases I still get an error that the Camera is unable to contact the test server when testing the email setup.
The camera’s network is configured as.
IP 192.168.254.2
Subnet 255.255.255.0
G/W 192.168.0.1 <- is this right?
I tried running a tracert 192.168.254.2 but it failed after reaching 192.168.0.150 which seems to indicate I've configured something wrongly but I'm not sure what. The other threads on this topic bounce around so much that I wasn't clear on what the final solution was.