Search results

Yep its a permission issue. No sudo command with CyberDuck over SFTP Is there not a way to give pi user write permissions on the etc\rpisurv folder?

I tried using SFTP SSH and I am able to connect. I can go to etc/rpisurv I then can open the yml file but I can't edit it. I am using my user pi to connect. I assume this is a permission issue again. If I use the command sudo nano it does open the yml in putty but it is very difficult to edit it.

I can't seem to edit the display1.yml file. I have setup samba using the following steps. In the console, type sudo apt install -y samba. This will install the Samba package. Once installed, type in sudo nano /etc/samba/smb.conf. The will open the file smb.conf in the console, ready for...

Did you mean GTX 1060? I am thinking something like the GTX1050 to run 24 cameras. https://www.newegg.com/gigabyte-geforce-gtx-1050-ti-gv-n105toc-4gl/p/N82E16814125952?Item=N82E16814125952

Yes I am definitly willing to try this.

So why is this a constant battle? I have been using BI for several years now on over 20 machines. Most work perfectly however when they don't work it is ALWAYS a memory leak. I have one that is on the latest version of BI 5.3.8.15 and it keeps creeping up till it crashes. Have 20 cams with 16Gb...

Well I was able to install 5.2.2.3. I still have a memory leak though. BI open for about 48 min and my ram is over 12GB of usage...

I get an error when trying to install the 5.2.1.4 version from the history page. BlueIris.exe System Error " The code execution cannot proceed because SeaMAX.dll was not found. Reinstalling the program may fix this problem. "

Thanks. I will give it a try and report back.

Where do I go to download previous versions? Here shows version information but i don't see a download link. Blue Iris Updates (64 bit) - Updates

So I did a reset of this pc. Worked for a few months and now the system is chewing up ram. Takes like 20 min to use up 16GB... I am on 7323 driver with an 8th gen cpu. Running 5.2.2.2 x64 as of today. Is there no other trouble shooting to be done to figure out why this happens?

That is definitely an option. I would prefer to find what is causing the issue instead of just wiping it clean and starting over. It is a 6 hour trip to get to this location.

Installed the latest version of BI and this machine still continues to be un-usable. The memory usage just keeps rising until the machine is not usable. Interesting thing is I have at least 12 more machines with the exact same hardware and no issues. Any more suggestions?

I am aware it is a video driver issue. I am using the recommended driver per the wiki. Memory Leak: Quick Sync (Hardware Acceleration) 8th Generation (Coffee Lake) Driver Version 24.20.100.6194 is known to be good: <link no longer works> 24.20.100.6229 works too: <link no longer works>...

I have a NVR that was running BI 4 that I could not stop the RAM from climbing over 14GB on BI and crashing the system. I upgraded to BI 5 to see if that would fix the problem it did not. It takes roughly 2.5 hours for BI to kill my system. I am viewing the cameras locally on a TV. I have 24 Two...

Good call. I installed an older version and then was able to update.

Could use some help with this. I installed the latest update from BI website and now BI wont start. I tried uninstalling and reinstalling with no luck. Any other suggestions?

Thanks for the replies. I got it working. The issue appears to be that when I imported my reg file with my settings all 24 cams changed to NONE on Hardware accelerated decode from Default. It appears that importing the reg file again straightened it out. The 101 was from task manager not...

Receive buffer is 101MB GPU is around 25% CPU is around 45%

Yes using onboard. Memory Leak: Quick Sync (Hardware Acceleration) | IP Cam Talk

I just restarted BI and started a timer. I will update when memory gets to 16gb. It gets to 6GB when BI starts. Following settings are the same on each camera: Frame Rate is 15 Iframe is 30 CBR Bit Rate 2560 As for network I am not sure I follow your question. Cams are going into a Netgear...

I have an I5-8400 with 16GB of ram running on Windows 10 x64. Have 24 - 2MP Dahua cams. When BI turns on it takes about 5 min and my memory usage on BI is 80% of the 16GB. The system becomes nearly unresponsive. I am using the recommended video card driver. I have Limit decoding unless required...

Ok Figured it out. It did not like subtype=1 it had to be subtype=0 What is the difference?

Ok. I am getting closer. I now have the RPISURV screen visable via the HDMI out from the PI. It says cannot open stream. I can however open the stream on VLC player without issue. Below is my config text. #THIS IS A YAML FILE, INDENTATION IS IMPORTANT. ALSO DO NOT USE TABS FOR INDENTATION, BUT...

I changed my surveillance.yml to the following but still the Pi boots with no video other than text. Is it necessary to delete the cameras that don't exist? I only have one. This replaced the file in Home/Pi/rpisurv/surveillance/conf #THIS IS A YAML FILE, INDENTATION IS IMPORTANT. ALSO DO NOT...

I have ran through all the steps in SvenVD/rpisurv and can not get any video to display. I used to be able to see a GUI with the HDMI out but now I just have text. Any help would be greatly appreciated. I can open the one stream in VLC without any issue. I just can't seem to get anything to load...

Are you still working on this project? I could use a little help getting it running on my pi

What did you mean by this?

Yea i am the A**hole. Got a mirror handy.