Search results

I hav ejust bought this doorbell and have blocked all cloud access. I have managed to setup the doorbell and get the camera added to BI. The bits i'm struggling with is getting 2 way audio working. I have home assitant which picks up the button press and can then alert alexa, alert mobiles...

Wow, this does sound like a great solution - Just need to see if i can find a descent supplier for this in the UK!

I ended up deleting all my recordings and starting with a clean database. Not happy but it got me working!

tried that - didn't work. Still have the same error

My BI server crashed and now i'm getting an issue with my server not picking up all the old files. It only seems to pick up and record new files. The database recreates but always says I have over-allocated and its showing red on the graph line. I also get this error : Delete: nothing to do...

I've switched over to Blue Iris - Has anyone managed to get the 2 way audio working on these camaras? (over ethernet cable)

Was going to ask the same question @EMPIRETECANDY can confirm. But guessing this is the last firmware

I'm looking for a solution to this but looks like no one has anything. Ideally I'm looking at just something that will give me 2 way audio. I have enough cans covering everything and don't want another camera... Just desperately need 2 way audio of some sort!

i tried the senseai yesterday and tbh i couldn't tell a difference between deepstack. Both work well. With deepstack I liked how to logs shows the timinigs - my senseai didn't have any logs so i switched it back. Switching was as simple as turning one image off and powering the second one...

i've just switched to the docker version of deepstack and i'm finding it to be much better than the local install. I would also be interested to know if the docker version of senseai is better. The switch is simple with docker so i might just give it a go but would be good to know if anyone is...

i'm a bit confuised now "use main stream if available" What does this actually do? I had it checked but in this post most are suggesting it should be unchecked? Does this setting mean it uses the main stream or does unchecking it mean it uses the main stream? (i have sub streams setup on all...

I've setup telegram alerts - It works great and i can get all the images for all alerts on it. I sent the group to remove everything after 7 days so i can get a bit of a history on it too :)

Is there a way to override the default streaming profile? I was the set the default UI3 quality to 75% rather than %20 (or at least for the 1080p_vbr profile which is loaded by default). I know you can manually change it but these get overridden when you update and needs to be set for each...

There is also something that was mentioned about a failed.txt that shouod stop the boot loop and allow you to flash from the config tool but not sure. I think it was just add an empty failed.txt file in the root folder. Maybe research that and see

That looks like it didn't complete. There should be another line with success.txt to show it completed. Check your commands.txt file. I used this run dr run dk run du run dw run dp run dc tftp 0x02000000 romfs-x.squashfs.img; flwrite tftp 0x02000000 kernel.img; flwrite tftp 0x02000000...

i found mine kept failling with a direct connection so i tried it with a basic dumb switch and it worked.. might be worth a shot?

Your ip is wrong... Set the laptop to 192.168.1.1 255.255.255.0 in the advanced section add an additional IP - 192.168.254.254 255.255.0.0 give that a try

persistence pays off.. tried exactly what i did above and for some reason today it just worked!! straight in, reinstalled firmware and camera came up. Tried updating again in the config tool but that failed, but then went to the web browser and all updated succesfully. Re-configured and were...

ok i'm struggling to get this working!! I have a ipc-HDW5231r-ze that had a failled firmware update. It boots, come up in configtool (as 192.168.1.108) but then looses connection and goes into a boot loop) I've tried a factory reset in config tool, hard reset directly on camera. I basically...

Do you have a link to the files you used. The links no longer work :( Need to upgrade mine and having the same issue as you!

Whats the main difference between using the AItool and deepstack directly in BI? I just found a config guide today and setup my BI to use deepstack... then found this tool later! Just wondering if its worth undoing all my deepstack work and setting this up instead. (sorry for the super-newbie...

Hi Guys, Has anyone tried setting up a raspberry pi zero as a viewer for BI UI3? Is it powerful enough to run it? Thinking of getting some pi zero (rather than pi4) as its much cheaper and I want a couple of these as just stand alone camera viewers. I know people have done this fine using a...

it works at slower speeds though, so I want to confirm how many drives i can actually fit in the chassis. I'm guessing 1x nvme, 1x 3.5in hdd and maybe another hdd in optical bay (if required) ? I'm mainly concerned if the nvme and the hdd can work together and using one or the other doesn't...

How many hdd did you fit in this in the end? I'm looking at the specs (looking at buying the same machine) and it looks like it can only have 1 nvme and maybe 1 sata drive? can you confirm by any chance if this will work with the nvme and ssd (confirming this is the same machine as you)...

any chance i could have a look at your tasker job. I tried it but couldn't get it working right so might be something i'm doing wrong.

Thank you for the reply! i spoke to Andy earlier and the cheapest cameras he had were the 2432 but 4 cams + nvr worked out a lot more expensive than this kit i found. I'm looking for something budget as this will be a light use for events only kit (couple of times a year). It will be put up...

I'm looking for a cheap budget system for indoor events and stumbled across these Olix cameras. I can't really find any website or any information on them online other than one website which stated they were a Dahua partner / Dahua brand...

I'm looking at purchasing a CCTV NVR and camera kit for internal monitoring during live events. I really only need it to monitor indoors for casual checking to make sure everything is good. It will be for viewing only and not recording (although i may add a hdd to be able to record at...

I find GDMSS plus much more user friendly than the BI app. I generally configure both up and switch between the 2. I configured the same setup for a few friends and family and they all also preferred the gdmss plus app. If you have your firewall rules right you can just set both up and switch...

just updated to DH_NVR5XXX-4KS2_MultiLang_V4.001.0000006.0.R.210208.bin - so far working well and no issues to report. Will keep an eye on it if i find any issues.