Search results

I'm non lucky with the WiFi settings!! I tried also with the hotspot of my smartphone (without password), but it is always disconnected... I don't know why! :(

Ok...so I think I must solve the issue with the connection to wi-fi

Thanks for your support! Yes, the current situation is: - WLAN not connected - Ping to LAN Address is OK (get reply) - Ping to WLAN Address is OK (get reply) - In SADP I can only see the LAN Address (even if when I restart the camera, I'm able to see also the WLAN address in SADP but just for...

I disconnected the ethernet cable and wait 4 hours, but the camera didn't appear... Exactly, I noticed that, the camera results not connected to WiFi but I can ping it...

It's aTip-Link access point... I will try to unplug the ethernet cable and wait several minutes, thanks!

Thanks for your help. I've tried to reboot after unplug the ethernet cable, I can see the camera on SADP for just a while (1-2 seconds) and then it disappears. I've noticed that even if I can ping the WLan IP address (when the ethernet cable is plugged), from Wlan setting the camera is...

Thanks for your answer. I'm actually using the cameras through Ethernet, I want to move them on Wifi but I'm having problems. Once I've done the configuration for the WiFi, if I unplug the Ethernet cable I'm not able to see the cameras with SADP. I can't use DHCP because in our company we use...

@alastairstevenson - Have you got an idea to solve my problem? Thank you very much

I've got 7 Hikvision cameras and I've got the same issue on some of my cameras. Is there a solution to fix this problem? Thanks

Hi all, please, I need your support concerning the Wi-Fi setting of my cameras. I've got the following settings on 2 of my cameras (see attached images): CAMERA 1 LAN IP 192.168.50.20 WLAN IP 192.168.50.40 CAMERA 2 LAN IP 192.168.50.17 WLAN IP 192.168.50.21 I can ping and scan all the...

Unfortunately bad news: I changed the HTTP port number of the 3 cameras that often I can't find on SADP but, after one day, few minutes ago one of them (192.168.50.19) disappeared from SADP. After a cold boot now it is online again. In attachment the configuration of the camera. Got any other ideas?

Yes, they are exposed to the internet individually

Thank you for the reply! The guy who installed the first camera told me to change the HTTP port, I don't know why.... However, I will change the HTTP port to default and see what happens... Thanks!

Hi all, I've got 7 Hikvision Cameras connected to the LAN of my company (see image). Some camera suddenly turn-off in a random way, i.e. this morning I can't see 3 cameras on SADP and I can't ping them (but the leds on the cameras are on). If I unplug and plug the power supply on the cameras...

Hi all, I've got 7 Hikvision cameras, 5 of them are "World region WR" (updated to 5.4.5 firmware) and 2 of them are "China region CH" (restored to 5.2.5 region after bricking). The model of the 2 Chinese Cameras are: - DS-2CD2032F-I - DS-2CD2432F-IW I've got a problem with these Chinese...

Yes, it's a CCCH. I tried the 5.30 Downgrader and now it works.... thanks a lot!

I connected the camera to a PC with Windows XP and now the TFTP recognize the camera! Thanks for the advice! Now I have to find the correct Firmware for my Model (DS-2CD2432F-IW) because TFTP doesn't complete the upgrade with the firmware that I tried...

Thank you very much for your reply, but the current address of the camera (in the "Min-System" mode) is 192.168.1.64 and even if the PC IP address is 192.0.0.128 I haven't got Telnet or RFTP access... Thanks in advance for any suggestion

Hi all, my camera DS-2CD2432F-IW is in "Min-System" mode after I tried to update the firmware. I can see it with SADP (192.168.1.64) but I can't change the parameters (IP, tec.), I can't access with telnet and TFTP doesn't recognize the camera. I haven't got a copy of the mtd files. What can I...