Search results

As I have a UDM Pro already it has the NVR built in. I have the non pro version and some other cameras I expose over rtsp to my surveilance systems with no issues. Wish it could be in standalone, but it works well since I have the NVR there anyways. Btw they usually have three streams of...

Network config is Unifi Pro with 10GB SPF backbone powering over POE directly from a rack switch. For now the cameras is on an open, unrestricted VLAN (tried without VLAN too with same result). I have two consumers of the cameras. 1. Synology Surveilance station that consume the main stream 2...

Here is an example of the skipping.

Oh sorry, you said Next get rid of CBR so I assumed VBR, but I changed them to CBR now. (only two options). It helped a BIT on the smearing (the artefacts), but still I see it skips seconds on the main stream. Since this is happening in the UI of the camera I assume we can rule out the cables...

Thank you for your input. I have now for starter changed CBR to VBR on the 3 cameras and 4096, set exposure to manual and the range you suggested. The gain is now 0-40. Regarding the Backlight is all set to off

Maybe this helps: i just say again so no confusion this is 100% default settings and all ‘ai’ things like motion detectors etc is turned off so should not be affecting the cpu

I have the old HDW5231R-Z 2MP that has been serving me well running on a unifi setup. I have newer dahua cameras that don’t behave like this. I have been updating the firmware on those with never any issues and today i factory reset them just to be sure. main stream is 264, 10fps, 1080 even...

Does anyone know about a battery / solar powered (can be poe) with light fast conntection, 4k, and good ir? I need a low profile 100% local camera for face recognizion on the fromt door. Cant install onvif doorbells as they pull over our transformators and getting expensive. Its snapshots will...

I downgraded to 15 and problem gone for now

I can report the same issue on 16 - substream 1 reset and substream 2 reset / disabled. A huge problem for AI / face / object detection that should not use main stream

This is on IPC-HDW5231R-Z with V2.800.0000016.0.R - From what I remember that was the firmware they should run? Is it a firmware that is known to be better?

Have anyone experienced things like sub streams reset, night mode color changes with no interaction? I have started to experience syubstrean 1 reset to 264h and substream 2 turns off. The consumer is using the streams over ffmpeg so no onvif

I installed yesterday a SD1A203T-GN that I should use in a terrarium - with its IP grade that should be no issue, but after being running for 5-6 hours this happened. The camera is in a temperature of around 30c and no water or moist close to it. Any solutions to this. I never openened it or put...

Going to have terrarium cameras Requirements: smallest possible size ptz onvif (going to use in synology surveilance) non cloud possibility waterproof a bit zoom will be used for terrarium so important wide view in a small space

I also did see someone tried to add it to Home Assistant, but never got merged Add reboot command to onvif camera component by KoljaWindeler · Pull Request #29069 · home-assistant/core - if it works with the home assistant onvif library its easy to write a custom service that does this kind of...

At least i van confirm the current EZVIZ updated to hkvision with onvif with no issues. couple of questions. 1. is it possible to send onvif reboot with a script for scheduling reboot 2. When someone ring the doorbell my phone rings. I want to pick up, but don’t want the person to know I did...

ah so need an onvif firmware. I guess i should flash one of them

is it an option on all the doorbell versions for scheduled reboots or is it something custom?

you are right, probably won’t blow up at least. I see it’s a friedeland 117 and see people use it for nest hello, though max 16v by connecting the 8 and 24v on the transformator. good to test as it’s the most common doorbell in Norway so a as good reference for others

One thing I have not thought about, and that is the "ding-dong"-part of it. I have an old one, probably made for 8 or 12v. What is the worst thing that can happen if I feed it 16 or 24 volts? Or do I need to buy a new one of those too?

Its very, very, very strict playing with 220V here, where its no insurance coverage if even trying to touch it. But the main issue test is I guess its easy to get it working in general, but taking into account wire length and long term stream is harder to predict. The reason why Im asking is I...

Yes, sadly I do have a chime. I se realize I might just have to bite the bullet and install a new transformer as I guess using this could bring issues with video and wifi drop. I get worred when its said its needed 30va, but the only other transformer I have laying here is a ring one, and that...

I have now moved, and cause of changing the transformator cost 4-500USD in electrician cost (not legal to do it yourself here) I just took a picture of the old one to see if anyone tried this transformator as I can see the 12V option gives 1A that seem to me to be quite high? As the DB1 is...

We have something like craigslist here that is dominant for selling and buying. A horrible place as when you put it out its always 10 people trying to haggle at 50-80% of the asking price - thats just annoying

Yeah, they are expensive, so I guess mine, "new" in a box will pay off this doorbell change easily. Actually it was the WAF that requested to dismount the doorbell. I get hell for doing a smart home, but when the WAF likes something, then suddenly it has to be the best. When I want something its...

I bought it cause of it said on their webpage it had 720HD and I thought ok, thats good enough for a doorbell, and it got native onvif, SIP, POE, twoway, local API and everything we can dream of, except the camera can only stream in 480P. Also when I looked at the webpage it didnt look that big...

Its mostly local selling here, but guess I can most for the doorbird. Think they still sell for like 500 bucks. its the apple of doorbells, but with just a 480p vga camera. If it had HD it would be ultimate. Onvif, local API, SIP etc

Good. Now I hopefully can sell the ring and doorbird soon and get out of paying subscription. It really adds up paying the subscriptions if you think about it

Lets see how this is going to go. Delivered today, but sadly more expensive in norway than us (89USD in US and 160USD in Norway) This is the correct one, right? (before I open the box)

My needs are to have hardware that does not actively block you from configure them after 1-2 years. Even if its no more updates they should be able to be configured at least, not having to run them on a separate controller.