Search results

Woah. A lot of haters here. This new design is awesome. I have installed hundreds of cameras from Andy and it always annoyed me that i can’t mount the cameras to a standard single gang opening or something else that can get installed during construction. This style camera housing solved that...

Thanks, This is what it looks like on the IVSS7016DR. The symbol I circled says "Sync" if you hover the mouse above it. It doesn't seems to work very well when connecting remotely so I will have to try again when I am connected directly to the NVR.

I have a requirement to be able to review 4 cams at the same time in a casino. I wasn’t able to figure out how to play back 4 cameras at the same time. The clocks need to be in sync and they want to review at 16x speed. This is for the gaming Commision to review footage in the cashiers cage...

I followed the document on that site with a VTO and Grandstream phone. Both devices show registered now so I would think it should work however it says, "The call is not answered" when I press the button on the VTO.

It says Dahua because you installed a “Logo” firmware. They usually make two firmwares. One logo and one oem so that if you are selling to customers and don’t want them to know the brand or want to put your own brand name on the camera, you would install the oem firmware.

This camera doesn’t have face recognition capability. You would either need an NVR with the -I option for the facial recognition to work with this or any camera or one of the 7XXX cameras with the -FR option. The face detection option built in to this camera is a much simpler feature than Face...

That worked fine for me but then when I updated to the May firmware from @EMPIRETECANDY the Smart Plan stopped working because of algorithm mismatch. I went back to the 0425 version mentioned by @redfive in this thread and Smart Plan started working again. I'm curious if there should be...

Smart Motion Detection makes it much easier to search video. For example a bird or a tree blowing won't create a motion event. The camera uses AI to determine whether or not an object is a person or vehicle.

I am running the 200319 version and it works on my older 5432-16P-4ks2 hardware v1.0. There are still problems because the firmware is not very compatible with Dahua AI cameras. I was hoping that a new firmware release would fix the issues however the two new versions just listed will not load...

I got it to work by using Internet Explorer 11. @EMPIRETECANDY contacted Dahua and I forgot to post the workaround here. It is disappointing that it doesn't work without a plugin which is supposed to be one of the big advantages of the new version. Hopefully they correct it.

Why are you using it? I mean what specifically do you use it for? Configuring Dahua camera's and NVR’s or your main program that you view cameras with? Also, what video card do you have and what drivers are installed with it? I have a couple systems with 4K screens with 25 cameras displayed...

You can see in the picture of the Screen connected locally to the NVR there are 5 options that all say the correct thing when you hover the mouse above them where the picture of the screen that is logged in via web shows 4 options and it thinks that Video Structurization is Human Body Detection...

Yes. I also tried from multiple computers. I have this issue on 4 NVR's now. 2 NVR608-64-4KS2 and 2 NVR5432-16p-4KS2 units. Everything else seems to work fine. I have noticed the v4 web GUI's are somewhat junk. They are not consistent with the local access. For example. The Smart Plan...

Can you ‘Live View’ from web on both versions? I get a download certificate message. Live view still works from smartpss.

@steve1225 It seems that you have some experience with these devices. Any chance you would have some input on my post here? https://www.ipcamtalk.com/threads/how-can-you-unlock-a-door-with-a-vto2202f-p-door-station.48053/#post-449145

Has anyone else updated this and got Live View to work or do you get the same "Download Certificate" link like in my screenshot?

This would be a new property that doesn't have any of the Viking components so I would just be connecting the door straight to the relay contacts on the VTO. Adding the SIP extension for the VTO makes sense but what do you do on the Dahua VTO side to accept the commands from the front desk...

The only option I can think of is to create IVS tripwire rules for the set of parking spaces. It won't track where the person is going but you could get alerted when someone pulls into the specific spaces covered by the tripwire rule. That could be done somewhat cheap and easy. What you are...

I'm interested to use the IP Villa Door Station in a hotel entry vestibule. I currently use Viking Door Phone E-40 and Viking Remote Touch Tone Relay Controller RC-2A. When someone pushes the button on the Viking Door Phone, it is wired to an analog ring down line which then rings at the front...

I just ordered an NVR, 4 cameras, and some mounts from @EMPIRETECANDY on Wednesday 5/6 and received them in Arizona on Wednesday 5/13. This was longer than it usually takes to get from him and he shipped Fedex instead of the usual DHL because everything is messed up with the shipping now. He's...

I have an NVR5216-16P-I with and HFW7442H-Z4 and I'm trying to set up a useful push notification. First of all, the camera and NVR combo are awesome when you are trying to get license plate and vehicles coming on and off of a property.(Not as good as the IVSS7008-2I though) I pointed the...

It has nothing to do with the cameras from @EMPIRETECANDY. The firmware's work on cameras from him however @EMPIRETECANDY told me that nobody should be attempting to install any firmware unless he posts it here on the forum or you risk bricking the camera. The reason you can't load the HX5XXX...

I'm curious if the firmware.bin file that was from your previous post(DH_IPC-HX8XXX-Nobel_MultiLang_NP_V2.800.0000000.5.R.200324) is what should be used for this because the 200425 download you are posting from Dahua Wiki doesn't include the firmware.bin file.

Remotely monitoring with UNMS is very useful also. You can monitor the status of all your sites from a phone app.

It has been working great for me. I connect to a lot of different model Dahua NVR's and cameras and it resolved issues that I had with previous versions of SmartPSS. One of the features I find very useful is the "Link to WEB" button on the device config page. I have some NVR's on cellular...

Order a IPC-HFW7442H-Z from @EMPIRETECANDY. It's an awesome camera and does 60 fps.

I had the same problem with the HDW5442TM-AS-LED but as you can see it worked on a HFW5241TP-AS-PV

Correct. Web login with no plugin is broken for me on NVR608-64-4KS2.

I just updated and it looks good so far. I have 43 cameras on the system so I didn't want to default anything. The one problem I am seeing is Live View but I have had this same problem with other NVR's that I updated to 4.0 so I assume it may be something with my computer. I can view the...

Did you extract .bin file out of the .rar file before you updated? I haven’t tried it yet. I was planning to do it tomorrow when I was at the site with the camera.