Search results

So If I plug the camera to the router then the NVR can see it. If I try to add the camera to the NVR, I would get the red X.

I plug the camera to the NVR. So that is why you are only seeing 3 cameras connected. The NVR is able to find other wifi Amcrest but the new one POE I bought.

My home ip is 192.168.x.x. and the NVR is 10.1.x.x. If I I plug in the amcrest camera, how do I know which IP that the NVR assign to? Thanks

Do I need to add the camera via the NVR interface? I try to add it via the web gui. Maybe that is why it did not pick up?

Hi, I just bought the Amcrest IP5M-T1179EW-28mm from Amazon. I think the camera is ONVIF compatible with the NVR but the NVR won't pick up the camera. I have checked the setting on the camera. I tested it with ONVIF enable and with disable but the NVR won't pick up. Is it possible to connect...

Before flashing my 4 cameras to the dahua firmware. I am able to view the cameras with the gdmss app with TMO data but now i can not view it if I'm only TMO data. I can view it if I'm connected to wifi. Is there a setting in the gdmss app to let me view with data instead of wifi? Thanks

I am finally got all 4 cameras updated. Thank you all for your help. On to the NVR. Is it best just to copy the 3.26 and 4.00 firmware onto an usb flash drive then connect it to the NVR and do the firmware update? Thanks

Well, my first camera. I did it via the TFTP method. So I am trying to duplicate the same method but got the time out in the screencap. I did tried to flash via the web gui but it does not work.

Hi, I am trying to flash my other cameras but I am getting a "time out". Should I wait for a while or just kill the process and run it again? Thanks

WOW.. what a beautiful sight :) Thank you for the help guys..

Is this completed? The top is TFTP and the bottom is Console.

Do you know how long is it to flash the firmware? Once it is completed, is it going to stop the script by itself?

Thankn you very very much. Gonna try to flash the came again. Hopefully, everything will be fine this time.

Thank you..

Hi, I believe this is the firmware. It is listed as 190.97mb but when I downloaded, it is only 55mb.

Hi, This is the file name DH_IPC-HX5X3X-Rhea_Eng_P_Stream3_V2.622.0000000.31.R.180813 but it is not 190mb.

I still can ping to the camera but it is in and out. Not consistently like before. I still can not access via the web gui.

Hi, I think I might have bricked the cam. I waited for like 40 minutes but nothing happen. So i killed the power to the cam. I reset that camera but I can't access it via the x.x.1.108 IP. Yes, i tried 7zip. It extracting the file but gave me 2 errors. Thanks

WOW.. thank you. I didn't that you an open the bin. Crossing my fingers. Thank you again.

Hi All, I read everything thoroughly in this thread so far but I still can't figure out how update my cameras to the Dahua fw. I have download the Firmware from Dahua and even used the firmware posted it here but it is still not updating. Where do I find the "romfs-x.squashfs.img" since it is...

wow. Those are very good tips. I noticed that the snapshot setting is set for continuous. Even though I can't set up the snapshot to work and not knowing to set it up, I turn it off already :) I follow your new setting, the Lechange app connected to the cameras right away. I've tried to removed...

@mat200, Do you know if there is the firmware update for the LeChange kit from Dahua?

I think I know why I can't gdmss. I am running the latest Android Pie version so the app might not ready for it yet. I tried gdmss on an older Android device with older OS and it is working fine. I like to have it record continously and also record IVS event but you can always check to see when...

@mfish123 I moved the camera a bit but the haze is gone. Thank you. I will try to set up gdmss on another device to see if it is working. Do you know if it is ok to set the recording to record continuously and IVS at the same time? If I set the motion recording, I get tons of notification. As...

@mfish123 - Thank you for replying back. For gdmss, I use the 192.168.x.x IP address but can never be connected to it. Very strange. Those screen captures are using the LeChange app. The came with the haze is flat on the surface. I will move it to another spot tonight and let you know. I have...

@mfish123 When I selected to set up as Wired device. It tells me to initialize the device. I did it but it tells me that the device does not require to be initialized. The IP setup would bring me back to the add device screen. I am using the IP address that my router assigned for the NVR...

Wow.. a lot of details and tips.. Which encode is better? H264 or 265? I feel that 265 seems a bit slower and viewing on mobile take longer to load the videos also. Are you using an iPhone when using the gdmss app? I can't get the app to work on my pixel phone..

@mfish123 Overall, what do you think about the system? is it a keeper? I am still getting too much notification. I have set up a few tripwires for each camera but still get a lot of notification.

Are you viewing it on the Lechange app for mobile?