Search results

Hi, I haven't tried yet because it isn't affecting the camera view but it is for sure a problem of antiglare film. I have no idea if it can be removed easily.

Thanks a lot

anything I could do other than replace the vto?

Hi all, anyone experienced the same problem with the VTO2202F-P dome as in the picture? it doesn't seem to be a moisture or water leak issue. It looks like a defect of the plexiglass dome.

Hi guys what cable gland type and size is compatible with pfa130-e junction box? Does it have metric pitch or what else? Inviato dal mio Redmi Note 5 utilizzando Tapatalk

I suggest to open it in a dry place (the best is to lower the air moisture letting run an air dryer) wipe and remount. Probably the issue is due to high air moisture in the factory where it was assembled. Inviato dal mio Redmi Note 5 utilizzando Tapatalk

Hi all, does anybody have an idea what this symbol is? Inviato dal mio Redmi Note 5 utilizzando Tapatalk

Hi all, does anybody have an idea what this symbol is? Inviato dal mio Redmi Note 5 utilizzando Tapatalk

why that fw is that big? 130mb sounds a little too much....is that for the vto2202f-p?

Ok. Try this procedure when you change the language. From the initial page of the menu go to local setting. Than change the language (top right) Than quickly click (you must do it before it reboots) on "confirm" (you should have it in the bottom right corner. Inviato dal mio Redmi Note 5...

When you flash the multilanguage did you flag the "clear config"? Inviato dal mio Redmi Note 5 utilizzando Tapatalk

Mine is working with the same Poe switch of cameras. Check if you are connecting it to a poe port... Inviato dal mio Redmi Note 5 utilizzando Tapatalk

Do you mean how to find out the cameras IP address? Inviato dal mio Redmi Note 5 utilizzando Tapatalk

Question answered in this thread: Need help with VTO2202F-P Inviato dal mio Redmi Note 5 utilizzando Tapatalk

In fact that's the problem. At the end I found this draw and that's exactly what I did. Thanks catcamstar, you're always helpful. By the way, the vto2202f has a much better camera than the older vto's! Inviato dal mio Redmi Note 5 utilizzando Tapatalk

Hello guys, in my intercom system I have the vtns1060a switch. Now i'm going to replace my broken vto2000a with a vto2202f-p. The doubt is can I connect the new vto to the vtns directly? I have this doubt because I have found the draw below. Apparently the vtns is a passive switch so could be...

Ok, I'm definitively an idiot...I was trying to connect to a non Poe port of the switch...it seems to be ok connecting in the right port. But I still have a question. Could I damage this vto if I connect to the vtns1060a? I'm asking because I found this (see picture) in a UK website. Inviato...

Hello guys. I have bought a new VTO2202F-P that was intended to replace my broken VTO2000A. I wanted to test it before mounting in its place so I connected it to my VTNS1060A but it didn't show anything....then I tried to connect to a Poe switch and nothing happened as well. Finally I tried to...

I'm not expert but I don't think it is possible because, besides the powering matter, the vth's couldn't communicate with the vto without the vtnc. Inviato dal mio Redmi Note 5 utilizzando Tapatalk

My mistake sorry, you are completely right. I have just checked twice with accessories selector and they are compatible. Inviato dal mio Redmi Note 5 utilizzando Tapatalk

According Dahua accessories selector they're not compatible but if you say so I believe :) Inviato dal mio Redmi Note 5 utilizzando Tapatalk

Are you sure that the pfa130e is compatible with hdw5231r-ze? Inviato dal mio Redmi Note 5 utilizzando Tapatalk

Yes, you don't need an extra unlock button unless you don't want to have one (i.e. nearby the door as I have). Inviato dal mio Redmi Note 5 utilizzando Tapatalk

Yes but remember that vto can't give power to the electric lock, so you need a power source too. Inviato dal mio Redmi Note 5 utilizzando Tapatalk

The electric lock is controlled by vto not directly by vth, so you have to connect it to the vto. Inviato dal mio Redmi Note 5 utilizzando Tapatalk

It's just an aesthetic matter. Unless you have a false ceiling a junction box is required to hide cables. Inviato dal mio Redmi Note 5 utilizzando Tapatalk

Hello, I had an intercom system composed of VTH1550, VTNS1060A and VTO2000A. The VTO has died due to water problems so I wanted to replace it with the new VTO2202F-P. Some vendors told me that this VTO is compatible with my VTH, just need to flash a sip firmware because newer dahua intercom...

For sure it wasn't condensation, it was soaking wet. Inviato dal mio Redmi Note 5 utilizzando Tapatalk

Probably it's ok for normal rain. Have you heard about recent flooding in Venice? I live not far from there and the rain was really heavy with strong wind. Anyway the vto is definitively dead...now I want to buy try the new vto2202, it's ip55 so should have a better rain protection. Inviato dal...