Search results

Thanks guys, I got it working. SouthernYankee was correct, I guess the cameras have to be in the same port as when I set them up. I have 4 coax wires and they are all unmarked, so I had no idea which one the camera was on. I had to try each wire in all 4 ports to see if that would work. I...

The old camera system was working when I installed the new system. But even if the coax was bad, I plugged in a camera directly into the NVR with ethernet, and it still won't recognize it.

Hey guys. I recently purchased a new system from Andy to upgrade an old system. I have coax siamese cable run already, so Andy recommended the ePoE NVR and cameras so I can use the existing wiring. I purchased a NVR-5216-16P4KS2E 4 - HDW5231R-ZE IP cameras and LR1002 adapters to use the BNC...

I ended up purchasing the following from Andy: DHI-NVR-5216-16P-4KS2E (Qty 1) IPC-HDW5231R-ZE (Qty 3 white 1 black) LR1002 (Qty 6) PFA130-E (Qty 3) I'm in the process of hooking it all up. Does anyone recommend a doorbell camera? I would prefer a wired version if possible. I read the...

Hello everyone!!! I posted this in the new member area, but didn't get much traffic. I recently purchased a home that had a camera system installed. I want to upgrade, as I cant see anything at night. Like zero. There are 4 cameras in total. 1 pinhole with intercom at the front door, one dome...

Cable quality is good, definitely not easy to run new cable. I looked into baluns, but it looks like they are very expensive. Thanks for the reply, I'm going to post this in the Dahua forum, maybe i can get more replies there.

Hello everyone!!! I recently purchased a home that had a camera system installed. I want to upgrade, as I cant see anything at night. Like zero. There are 4 cameras in total. 1 pinhole with intercom at the front door, one dome over the garage, and 2 bullets covering the backyard. Has a...