Search results

I like the look of these! I will give them a try. Cheers

But how do you then fix them all to the wall please?

If a bunch of 4 cables would you tack 1 cable and cable tie the rest to it? Just trying to work out how to keep it neat when a full bunch of 4 cables.

Would any of you run all 4 camera cables out of the NVR and up the outside wall without armoured trunking on a residential house? If they are close enough to cut it you have hopefully caught them on camera ‍♂️ ?? what do you guys do for residential?

For the farms they are really just wanting to see vehicles and lorries going into the yard and people wondering about. Need to cover a larger area so something has to give I guess. I'm just interested in how you guys run the cables to the cameras from the first floor to 3m high or higher...

So would you just leave in the loft? To minimise cable?

So I was installing a 4 camera system for my mate at his farm. Walls are solid brick and block inside and out. It does not record to 2 places just the NVR.... maybe this is a mistake? My friend was really concerned the cables could just be cut. (Which I understand his concern). Setup - Nvr...

Hi all Ok, so I'm wanting tips from the pros. If I have a 4 camera system, if I could have an NVR anywhere in a house, power in the loft if needed. Hoq would you professionals install to keep the wires secure from being cut? Armoured trunking or conduit? Looks pretty commercial though...

Thank you. I will try both of these things

I did the port forwarding. Very weird I still cannot see the cameras even when I'm connected directly via ethernet and type in the NVR ip 192.168.1.170 into browser. The cameras are listed but not able to see them If I put in 192.168.1.170:65001 002 etc i get directly into each camera...

Thank you. that makes sense. I am new to all of this. Is this really the simple way to plug and play these cameras and be able to see them on my phone away from home? It's much more complicated than I was expecting.... I dont really know where to start with vpn...

I'm using HIK vision NVR and cameras. How do I VPN plz?

Hi guys I can not view my HIK cameras remotely on my phone or on admin page IF I am not connected to my home wifi/connection. I can reach the admin page in my browser the cameras are listed but are not showing up. When u click a camera it simply says live view failed. I have done port...

So I fixed the issue. If anyone has same problem: I was changing the ip of the router... and trying to put the cameras onto the same ip but with different end numbers. Where I can use use plug and play code and set the IP to the DHCP auto config and then untick it to keep the same IP. I then...

Thank you. Just tried and still no joy? So I want to connect the cameras using assigned ip like: 192.168.1.6 192.168.1.7 192.168.1.8 If I use the NIC address I cant watch the cameras on my mobile or get alarm notifications etc (when on mobile data).

I 'simply' want to view my cameras from an IPv4 address and not using the internal NIC IPv4 address. BUT when I do everything I think I am meant to do... the cameras do not go live. So currently can only use the cameras on the NIC address. Maybe somebody can walk me through it or suggest a...

No sure as to why now I'm plugged into the router only the NVR is showing in SADP and not any cameras. This is hurting my head.....

Wasnt sure it was needed. If I reset the dhcp it fills it in for me with 192.168.1.254 which is also how I can log into my router.

Thank you for that. I have done that now but it still wont connect. I have connected the NVR directly to the router via the LAN port. And then my laptop to the router directly. When I do this, SADP only shows the NVR on the network under IP 192.168.1.169 (or 200) if I set it to that. If I try...

A little video. Working in the browser connected via ethernet... but not displaying on the NVR. Also noticed I cant point browser to the NVR?!

I only just changed it to 255 from 200. I will change back to 200. Thanks Just edited original post when I described

Thanks. Yes the diagram is correct. NVR IP is being weird - if NO router is plugged in to LAN port, SADP shows 192.168.2.64... it will not let me modify this for some reason? When I plug in the router, an extra device shows up (same name as nvr) with ipv4 address saying 192.168.1.64 BUT...

Hi all A big newbie here, trying my best to learn. So used DHCP to find my ipv4, subnet and default gateway. Ipv4: 192.168.1.169 Sub 255.255.255.0 Gateway: 192.168.1.254 I uncheck dhcp and click apply I have 2 hik ip cameras and my laptop plugged into the NVR poe ports. LAN has a cable to...