blurry
-
R
Image Quality Issues
I got an IPC-D54IR-ASE S3. Attached is a screenshot of about 1/4 size (1/2 length, 1/2 width) from BlueIris displaying the came using the full area of a 4k monitor. I understand the camera is 2688x1520 and we look at a quarter of the size so something like 1300x700. However, I am still a bit... -
E
Problem with Dahua IPC-T5442TM-AS 4MP
Hello, I have a Dahua IPC-T5442TM-AS 4MP set up that's been showing a blurred video which seems to be getting worse by time. You can see a screenshot of the camera visual in the attachments. Things I've already checked and tried: Checked the stream from both Blue Iris and directly from camera...- edwarddamato
- Thread
- blurry dahua
- Replies: 5
- Forum: Dahua
-
Focus prob with 5.5.0 firmware on vari-focus camera
I have a vari-focus Hikvision DS-2CD2742FWD that I recently upgraded from 5.4.5 firmware to the latest 5.5.0 and ever since the focus goes blurry every night. It's not an IR lighting issue because I can manually go in of a night and reset the focus to be pin-sharp which is great until the... -
J
blurry (hik)vision DS-2CD63C2F-IVS
Hi cctv gurus. I've got this DS-2CD63C2F-IVS 12mp fisheye and I just cant get a good image out of it. I've fiddled and changed every setting I can see and not getting anywhere. I've attached some screenshots for your consideration. As you can see in eg1; the bush looks like a painting! Any... -
DS-2CD2542FWD : blurry during movements
Hi fantastic camera but I see a little blurry during movements of objects/people. I use daylight and led light on the night (no onboard infrared). Which commands on configuration I must change for improve details of people during their movements? On video settings I already set "smoothing" to... -
N
Gain can not be changed
Hi guys, The gain setting on my 2cd3135f-iws can not be changed. The bar is standaard on 100% wich is to much because I have to turn up the DNR to reduce the noice but when I change the DNR to a acceptelble level the blur effect appears when someone walks by. Do I have to turn a setting off to... -
P
Ghosting/Motion Blur in snapshots. . .
Noob here trying to figure out why my snapshots look so terrible. An example image can be seen below: The camera is a HIKVISION DS-2CD2342WD-I. I have tried varying the exposure settings and have seen no improvement. The current setting can be seen below: Does anyone have idea what I am...- phurious
- Thread
- blurry ghosting hikvision snapshot
- Replies: 3
- Forum: Troubleshooting
-
J
DS-2CD2732F-IS blurry picture - unable to focus
I've just installed my 4th Hikvision camera at my house, and I'm struggling to get this one to perform like the other 3. See the pic below for an example. Is there further adjustment that I need to perform, or is the camera just defective? As you can see in the picture, its as if the camera...- jon102034050
- Thread
- blurry ds-2cd2732f focus hikvision
- Replies: 26
- Forum: Hikvision
-
K
Cant get a decent night image on cars moving 25mph at 40 feet with my 4mp cam.
I have poured thrugh every thread here I can find and I cant seem to resolve this. I can get a daytime image from a clip that is perfect and almost can make out bumperstickers and plates from an image of cars going by at almost 90 degrees 40ish feet away. I dont expect to get plates but the... -
IR Mode x Focus on DS-2CD2632F-IS
We have a brand new DS-2CD2632F-IS that we just installed. From what I can judge it is properly focused. But during the night when it uses its IR leds, from what I can tell the images gets blurry. Is that normal? Has anyone experienced this and does have any tips? Those are the full resolution...
