Updated my B5442 as well, no issues at all. Just one thing I saw here that I didn't see with other cams & FW is that the IVS rules were wiped out when updating, haven't noticed that with my other cams. Just a heads up for people to check and re-establish their IVS rules after the FW update as applicable.
4.0 AI New models General_IPC-HX5XXX-Volt_Eng_PN_Stream3_V2.800.0000000.1.R.190706.zip
- Thread starter EMPIRETECANDY
- Start date
MikeyTech8
Getting comfortable
This is lovely news to hear. May I ask @EMPIRETECANDY will Dahua be working on the SmartIR support for these new models?
Models:
- Dahua OEM IPC-B5442E-ZE/IPC-HFW5442-ZE (4mp),
- Dahua HFW5442T-ASE 4MP Starlight Bullet,
- Dahua IPC-HDW5442TM-AS (Loryta IPC-T5442TM-AS) (4MP Starlight+)
- Dahua IPC-HDW5442TM-AS (4MP starlight TURRET)
- Dahua IPC-HDW5541H-AS-PV (5MP)
Look forward to hearing back from you
.Mine came with the update and where fine for a few weeks, but not anymore but could be another issue. I noticed the IR was on even though all my lights where on and it should of been color. I looked on SmartPSS to confirm and it was B&W so I went in to the settings and did a manual restart and if never came back. So I tried a reset with the button and nothing. So I thought it could be a POE issue as I tried a 12v 2.5a plug then it came on and if I unplugged it, it would stay on. Then the other one would go out. I tried different ports no change. My other cameras are fine no strange/intermittent issues. I have rebooted the NVR several times even overwrote the firmware no change. So I don't think its the NVR as the other cameras work fine and come up in a minute or two after rebooting the NVR. I'm on a Cyberpower true shine wave UPS so there shouldn't be a voltage or power issue. The other strange thing I noticed last night is the IR would be on and it had power but wouldn't show under registration. I'll try one at a time tonight if I can get them up and will re-flash and default them and see what happens.
Sorry if it jumbled as I wasn't sure how to explain the issue I'm just hoping I don't need to warranty them out. So is anyone else having strange issues with the IPC-T5442TM-AS.
Sorry if it jumbled as I wasn't sure how to explain the issue I'm just hoping I don't need to warranty them out. So is anyone else having strange issues with the IPC-T5442TM-AS.
jmwang
n3wb
Hi Andy- Are you sure this doesn't affect anything? I have this error, and coincidentally I *cannot* get IVS intrusion or tripwire to work. I've gotten it to work nicely on 3 other cameras that I bought from you.
will post the update soon, we get the latest new firmware, still need some testing on it and then relase. Thanks for your waiting.
jmwang
n3wb
Hi Andy,
I downgraded the firmware on my newly bought IPC-T5241H-AS-PV from 0706 to 0521 and IVS now works reasonably well. Its not nearly as reliable as on 5442 (release date 0930) but at least it isn't COMPLETELY broken like on the 0706 version. Be happy to test out this new firmware for you.
Hi jmwang can I ask where you got the older firmware from, I have tried 0706 and have same issue regarding red triangle warning, thanks.
Steve
Newest update if you guys can stand it being branded.
jmwang
n3wb
the initial link expired I believe. I think the one andy reposted under this heading will work.
AI 4.0 latest new firmware DH_IPC-HX5XXX-Volt_MultiLang_PN_Stream3_V2.800.0000000.0.R.190521.zip
Can i install this firmware on my b5442t-ase?
I will brick It?
Thank you
Inviato dal mio SM-N950F utilizzando Tapatalk
@EMPIRETECANDY
Are you sure this is the latest version for IPC-T5241H-AS-PV camera? Mine is running version V2.800.0000000.3.R, Build Date: 2019-07-19 already which seems newer than the firmware attached to this thread.
Are you sure this is the latest version for IPC-T5241H-AS-PV camera? Mine is running version V2.800.0000000.3.R, Build Date: 2019-07-19 already which seems newer than the firmware attached to this thread.
Link to the updated version: 4.0 AI New models IPC-HX5XXX-Volt_MultiLang_PN_Stream3_V2.800.0000000.11.R.191230
