4.0 AI New models General_IPC-HX5XXX-Volt_Eng_PN_Stream3_V2.800.0000000.1.R.190706.zip

Discussion in 'EmpireTech Andy' started by EMPIRETECANDY, Aug 11, 2019.

Share This Page

  1. EMPIRETECANDY

    EMPIRETECANDY IPCT Vendor

    Joined:
    Nov 8, 2016
    Messages:
    2,758
    Likes Received:
    5,127
    Location:
    HONGKONG
    This is the latest new firmware for these models.

    Attention, the firmware support these models only, please make sure you are use the right firmware for the right models and make a default after you finish the updating.


    IPC-T5241H-AS-PV
    IPC-B5442E-ZE
    IPC-D5442E-ZE
    IPC-HFW5241E-Z12E
    IPC-HDPW5442GP-Z
    IPC-HFW5241T-AS-PV
    IPC-HFW5541TP-AS-PV
    IPC-HDW5541HP-AS-PV


    New Feature Description

    1 Multi-rule people counting solution.
    2 Low bit rate solution.
    3 4MP/5MP camera of Series 5 supports high frame rate (50/60 fps) lower than 1080p.
    4 Add face detection function on customized fixed focal camera.
    5 Add audio importing formats MP3 and AAC on siren and spotlight network camera.
    6 Add 2560 × 1440 resolution.
    7 Optimize password resetting solution.
    8 Support license verification requirement for second period, and add algorithm version display.
    9 Improve IVS detection performance.

    FIXED Bug: NONE.


    Attention, this firmware not suit for IPC-HDW5231R-ZE or IPC-HDW2231R-ZS.
     

    Attached Files:

    Last edited: Aug 12, 2019
  2. looney2ns

    looney2ns IPCT Contributor

    Joined:
    Sep 25, 2016
    Messages:
    7,310
    Likes Received:
    5,629
    Location:
    Evansville, Indiana
  3. MakeItRain

    MakeItRain Pulling my weight

    Joined:
    Aug 7, 2017
    Messages:
    303
    Likes Received:
    145
    How about: Loryta IPC-T5241H-AS-PV
     
  4. EMPIRETECANDY

    EMPIRETECANDY IPCT Vendor

    Joined:
    Nov 8, 2016
    Messages:
    2,758
    Likes Received:
    5,127
    Location:
    HONGKONG
    Yes, use this firmware, i already send to @looney2ns to test it, if test well, i will post it here, i tested them seems good.
     
  5. Davahad

    Davahad Young grasshopper

    Joined:
    Nov 7, 2016
    Messages:
    49
    Likes Received:
    9
    Assume this support PAL version of cameras as that is what you usually sell me.
    IPC-HFW5241EP-Z12E
     
  6. EMPIRETECANDY

    EMPIRETECANDY IPCT Vendor

    Joined:
    Nov 8, 2016
    Messages:
    2,758
    Likes Received:
    5,127
    Location:
    HONGKONG
    Sure, no problem.
     
  7. EMPIRETECANDY

    EMPIRETECANDY IPCT Vendor

    Joined:
    Nov 8, 2016
    Messages:
    2,758
    Likes Received:
    5,127
    Location:
    HONGKONG
  8. MakeItRain

    MakeItRain Pulling my weight

    Joined:
    Aug 7, 2017
    Messages:
    303
    Likes Received:
    145
    Got a problem with: Loryta IPC-T5241H-AS-PV

    Just flashed and "factory default" and "default". I get a problem:

    It complain at the top "Setttings" with big red flag icon. So I click settings and go to system/version.

    t complained: "Algorithm authorization expired, please update license"

    Yes, yes, I factory default. No working.

    So I go back to old version: General_IPC-HX5XXX-Volt_Eng_NP_Stream3_V2.800.0000000.0.R.190521

    Old version is working fine. No algorithm problem.

    I have upgraded and downgraded twice! Same problem. Why am I so unlucky with firmware upgrades???

    Capture.JPG
     
    Last edited: Aug 14, 2019 at 2:07 AM
    EMPIRETECANDY likes this.
  9. MakeItRain

    MakeItRain Pulling my weight

    Joined:
    Aug 7, 2017
    Messages:
    303
    Likes Received:
    145
  10. EMPIRETECANDY

    EMPIRETECANDY IPCT Vendor

    Joined:
    Nov 8, 2016
    Messages:
    2,758
    Likes Received:
    5,127
    Location:
    HONGKONG
    The error i also found it, I already report to dahua guy for this problem.
    upload_2019-8-14_14-26-7.png
     
    MakeItRain likes this.
  11. EMPIRETECANDY

    EMPIRETECANDY IPCT Vendor

    Joined:
    Nov 8, 2016
    Messages:
    2,758
    Likes Received:
    5,127
    Location:
    HONGKONG
    This bug will fix up in the new firmware, this error not effect using.
     
  12. Larsje993

    Larsje993 n3wb

    Joined:
    Jun 28, 2019
    Messages:
    2
    Likes Received:
    1
    Location:
    Amsterdam
    This update is also for the T5442TM-AS right? I'm having troubles with successfully update this firmware, see picture below.
    Anyone knows how to update with succes?

    Schermafbeelding 2019-08-15 om 07.18.38.png
     
  13. EMPIRETECANDY

    EMPIRETECANDY IPCT Vendor

    Joined:
    Nov 8, 2016
    Messages:
    2,758
    Likes Received:
    5,127
    Location:
    HONGKONG
    Please read carefully, only suit these models.

    IPC-T5241H-AS-PV
    IPC-B5442E-ZE
    IPC-D5442E-ZE
    IPC-HFW5241E-Z12E
    IPC-HDPW5442GP-Z
    IPC-HFW5241T-AS-PV
    IPC-HFW5541TP-AS-PV
    IPC-HDW5541HP-AS-PV
     
  14. MakeItRain

    MakeItRain Pulling my weight

    Joined:
    Aug 7, 2017
    Messages:
    303
    Likes Received:
    145
    @EMPIRETECANDY

    Can you check with Dahua and see if they can get the 2-way talk working in the next firmware and NVR v3.216 firmware?

    The 2-way talk works thru the NVR and iDMSS when I use Amcrest IP2M-841 indoor camera (rebranded Dahua). The IP2M-841 2-way talk works going thru NVR v3.216 and iDMSS Plus. But the IPC-T5241H-AS-PV still does not allow 2-way talking thru the NVR and iDMSS. I have to manually add the camera separately by its own IP. This is a big inconvenience to the setting up VLAN as well.

    I originally thought the 2-way talk is not possible on NVR firmware v3.216 but now I know it works with IP2M-841 which is an old camera, that tells me a firmware change in 5241H can make it work.
     
  15. vcwannabe

    vcwannabe n3wb

    Joined:
    Jan 5, 2019
    Messages:
    4
    Likes Received:
    2
    Location:
    South Dakota, USA
    No
     
  16. EMPIRETECANDY

    EMPIRETECANDY IPCT Vendor

    Joined:
    Nov 8, 2016
    Messages:
    2,758
    Likes Received:
    5,127
    Location:
    HONGKONG
    The NVR will have some new updating soon, as i get news from dahua the 4.0 firmware for the NVR will have some update later this month or Early Sep. They release too many new models in the past 2 months, so need time to make them perfect.
     
  17. Larsje993

    Larsje993 n3wb

    Joined:
    Jun 28, 2019
    Messages:
    2
    Likes Received:
    1
    Location:
    Amsterdam

    Oooops, looked wrong..! Ill check more careful next time!
     
    aristobrat likes this.