5.5.8 - June 13, 2022 - Code Project’s SenseAI Version 1 - See V2 here https://ipcamtalk.com/threads/codeproject-ai-version-2-0.68030/

Does an upgrade process for SenseAI go thru the same steps as an initial install?
I downloaded the new installer, and it seems to be doing that.
 
This seems to be the most active thread for CP.AI questions but if there is a better place - just tell me and I'll go away.

In your opinion, is the time upon us where it's time for a follow-the-recipe type (e.g. me) to convert from DS to CP.AI? Should I wait for any dramatic new and improved installation and support within BI from Ken? For perspective, getting the nVidia drivers and DS installed was a challenge but I plowed through it and do have it working.

Thanks for any direction.
 
CAL7 said:
This seems to be the most active thread for CP.AI questions but if there is a better place - just tell me and I'll go away.

In your opinion, is the time upon us where it's time for a follow-the-recipe type (e.g. me) to convert from DS to CP.AI? Should I wait for any dramatic new and improved installation and support within BI from Ken? For perspective, getting the nVidia drivers and DS installed was a challenge but I plowed through it and do have it working.

Thanks for any direction.
Click to expand...
CP AI pretty much just works. I never messed with DS but from what I’ve read this is a lot easier. Just run the install program and turn it on in BI. Point it to a custom model (if you wish) and let it run. Pretty easy. I had it going in less than 30 minutes never coming with any background from DS.

You just need the Nvidia drivers and Cuda installed if you are using a GPU.
 
Last edited:
  • Like
Reactions: CAL7
Corvus85 said:
Where can I find the list of objects which that model can detect?
Click to expand...

5.5.8 - June 13, 2022 - Code Project’s SenseAI Version 1 - See V2 here https://ipcamtalk.com/threads/codeproject-ai-version-2-0.68030/

Been running CPAI for a few days and I'm not looking back to Deepstack. Everything is performing great and response times are better than Deepstack.
ipcamtalk.com ipcamtalk.com
Corvus85 said:
How do I point BI towards that model while also using ipcam-combined?
Click to expand...
You can download the model from Releases · ultralytics/yolov5. Then put the model in your custom model directory (default is C:\Program Files\CodeProject\AI\AnalysisLayer\ObjectDetectionYolo\custom-models. Once you've completed this you can add the yolov5I in BI.

Screen Shot 2022-10-18 at 6.42.22 AM.png

You shouldn't need to use both models on the same camera. However, if you want to run both models, just use a comma to separate them (ipcam-combined,yolov5I).
 
actran said:
CP.AI recent installs like v1.6.6 includes these models out-of-the-box at C:\Program Files\CodeProject\AI\AnalysisLayer\ObjectDetectionYolo\assets
...so no need to download...
Click to expand...

Ok so how do I use a combination of the yolo models and the ipcam models together? Ideally I'd like to have the ipcam-combined model for the day profile and the yolo model for the night profile. Won't both models need to be the same folder specified in the AI tab?
 
Last edited:
CAL7 said:
This seems to be the most active thread for CP.AI questions but if there is a better place - just tell me and I'll go away.

In your opinion, is the time upon us where it's time for a follow-the-recipe type (e.g. me) to convert from DS to CP.AI? Should I wait for any dramatic new and improved installation and support within BI from Ken? For perspective, getting the nVidia drivers and DS installed was a challenge but I plowed through it and do have it working.

Thanks for any direction.
Click to expand...

Now is the time, having used DS for years I confirmed a little while back that CP.AI was ready for mainstream and now with later versions and better support in BI it's much easier to use/install and performs better than DS
 
  • Like
Reactions: karlocikovic
I also think it would be a good time for an Install guide or sticky on CP.AI. I would do it but I am terrible on explaining how to do anything in person, let alone on paper. I think BI is pretty much good to go, but I am sure CP.AI will keep improving.
 
  • Like
Reactions: gwminor48 and CAL7
Vettester said:

5.5.8 - June 13, 2022 - Code Project’s SenseAI Version 1 - See V2 here https://ipcamtalk.com/threads/codeproject-ai-version-2-0.68030/

Been running CPAI for a few days and I'm not looking back to Deepstack. Everything is performing great and response times are better than Deepstack.
ipcamtalk.com ipcamtalk.com

You can download the model from Releases · ultralytics/yolov5. Then put the model in your custom model directory (default is C:\Program Files\CodeProject\AI\AnalysisLayer\ObjectDetectionYolo\custom-models. Once you've completed this you can add the yolov5I in BI.

View attachment 143017

You shouldn't need to use both models on the same camera. However, if you want to run both models, just use a comma to separate them (ipcam-combined,yolov5I).
Click to expand...
With version 1.6.7 now you can set which version YOLO model to use as default

1666106574500.png
 
  • Like
  • Wow
Reactions: Jediking, SimonM, 105437 and 4 others
Heads up, I just tried to install 1.6.7 and it errored on me. Normally I just upgrade over existing version, but not this time. I had to uninstall 1.6.6 and then it went ok.

Screenshot 2022-10-18 114549.png
 
You must log in or register to reply here.
Top Bottom