Amcrest Dome Camera

[intwoit]

Does anyone know what BI setup to use for Amcrest Dome cameras model # IP3m-956EW. This is an IP, POE, IR camera.

Thanks,
Al

 

[fenderman]

Does anyone know what BI setup to use for Amcrest Dome cameras model # IP3m-956EW. This is an IP, POE, IR camera.

Thanks,
Al

amcrest prohd, dahua rtsp, or use find inspect...

 

[intwoit]

I have included the info from inspecting, and tried all options. Using rtsp I get a single still image, and nothing else.

Opening 192.168.1.27 port 29000...
HTTP Get / request...
OK
ONVIF GetSystemDateAndTime
2017-11-22T18:29:07.000Z
Requesting device information...
Manufacturer: General
Model: IP3M-956E
FirmwareVersion: 2.400.General 00.15.R, build: 2016-09-06
GetCapabilities...
Querying services
Has Imaging services: /onvif/imaging_service
Has media services: /onvif/media_service
Has RTP_RTSP_TCP, requesting profiles
first profile is MediaProfile000
first source is 000
requesting URI for profile MediaProfile000
RTSP URI: /cam/realmonitor?channel=1&subtype=0&unicast=true&proto=Onvif
Has Event services: /onvif/event_service
RelayOutputs: 0
InputConnectors: 0
Has Device IO services: /onvif/deviceIO_service
AudioOutputs: 0
Done
Any help would be greatly appreciated.
Thanks,
Al

 

[fenderman]

I have included the info from inspecting, and tried all options. Using rtsp I get a single still image, and nothing else.

Opening 192.168.1.27 port 29000...
HTTP Get / request...
OK
ONVIF GetSystemDateAndTime
2017-11-22T18:29:07.000Z
Requesting device information...
Manufacturer: General
Model: IP3M-956E
FirmwareVersion: 2.400.General 00.15.R, build: 2016-09-06
GetCapabilities...
Querying services
Has Imaging services: /onvif/imaging_service
Has media services: /onvif/media_service
Has RTP_RTSP_TCP, requesting profiles
first profile is MediaProfile000
first source is 000
requesting URI for profile MediaProfile000
RTSP URI: /cam/realmonitor?channel=1&subtype=0&unicast=true&proto=Onvif
Has Event services: /onvif/event_service
RelayOutputs: 0
InputConnectors: 0
Has Device IO services: /onvif/deviceIO_service
AudioOutputs: 0
Done
Any help would be greatly appreciated.
Thanks,
Al

you likely have something set wrong...delete the camera...add it back..

 

[intwoit]

I rebooted BI and camera and deleted camera before rebooting. Same issue still
Al.

 

[fenderman]

I rebooted BI and camera and deleted camera before rebooting. Same issue still
Al.

Post your settings

 

[intwoit]

What is the best way to do that for the forum?
Thanks

 

[fenderman]

What is the best way to do that for the forum?
Thanks

Use the windows Snipping tool to take a screenshot and upload...

 

[intwoit]

 

[fenderman]

@intwoit remove the port number in the http box...delete :29000