Amcrest IP2M841B - Missing Auto Tracking feature?

P

ProTapper

Getting the hang of it
Apr 22, 2021
155
68
Dallas, TX
Hi Guys,

I have the Amcrest IP2M841B running wirelessly with my BI. But the web UI is missing the Auto Tracking feature and the Amcrest App doesn't turn on the feature and says, Failed to connect.

I think there are different versions of this camera, but only software or both hardware?

Here is the version information I have, can someone help me understand if it's possible for me to get Auto Tracking and if so, how? Or, is it not possible anymore on this camera?

Thanks!

Version Info:

Software VersionV2.420.AC00.18.R, Build Date: 2020-03-30
WEB Version3.2.1.619604
ONVIF Version16.12(V2.4.1.513183)
 
Here is my Version info that has the autotracking feature:

Software VersionV2.800.0000000.6.R, Build Date: 2020-03-14
WEB VersionV3.2.1.864542
ONVIF Version18.12(V2.4.5.826858)

Make sure you try different web browsers. Normally Dahua OEM like Explorer, but this camera works best for me with Edge.
 
wittaj said:
Here is my Version info that has the autotracking feature:

Software VersionV2.800.0000000.6.R, Build Date: 2020-03-14
WEB VersionV3.2.1.864542
ONVIF Version18.12(V2.4.5.826858)

Make sure you try different web browsers. Normally Dahua OEM like Explorer, but this camera works best for me with Edge.
Click to expand...

Looks like my firmware is older... How do you update it @wittaj?
 
ProTapper said:
Can you elaborate how you use it and why does it suck?
Click to expand...
I have it in my living room on my tv stand. It never fails to catch a light reflection or my cat's tail as it walks down the hall and ends up staring at the wall. I have it reset to looking into the room but it always ends up looking at the wall. The other annoying part is that is jumps to far overshooting the person that it is trying to follow.
 
fyi - camera being discussed

1639777181575.png
 
  • Like
Reactions: Flintstone61
mat200 said:
fyi - camera being discussed

View attachment 112499
Click to expand...
Correct, I got it for free from Amcrest as part of a promotion. It's a solid little camera, great for watching my pets. I have just found the auto-tracking a little lacking, maybe a little over-sensitive. It could also be my placement but I don't want a camera to be real obvious. I also have it setup on a curl command that puts it into a privacy mode when I am home from home assistant.
 
ProTapper said:
Thanks!

Guess I'm SOL, I got this one:

Click to expand...
Looks like the difference is the IP2M-841B. The 'B' model seems to have auto-tracking. I don't know your use case but I don't think you are honestly missing that much on this camera. While I will say auto-tracking on a PTZ is a needed feature on most PTZ cameras otherwise you will miss the action that you are trying to capture because without it will always be looking at the wrong place. Unless you plan to use this PTZ to actively monitor with that is. But like I said the auto-tracking isn't that impressive on this camera I have it on and it's ok I think the issue is mostly that you get too close to it in my house so it loses tracking on people. I mostly use home assistant to trigger PTZ positions which works great. The front door opens and the alarm is armed it spins to look at it. Same for the back door. The privacy mode is the real good feature of the camera, the lens being completely hidden is much nicer than even a camera that is off. Which is how my other indoor cameras operate.
 
As an Amazon Associate IPCamTalk earns from qualifying purchases.
Duh987 said:
Looks like the difference is the IP2M-841B. The 'B' model seems to have auto-tracking. I don't know your use case but I don't think you are honestly missing that much on this camera. While I will say auto-tracking on a PTZ is a needed feature on most PTZ cameras otherwise you will miss the action that you are trying to capture because without it will always be looking at the wrong place. Unless you plan to use this PTZ to actively monitor with that is. But like I said the auto-tracking isn't that impressive on this camera I have it on and it's ok I think the issue is mostly that you get too close to it in my house so it loses tracking on people. I mostly use home assistant to trigger PTZ positions which works great. The front door opens and the alarm is armed it spins to look at it. Same for the back door. The privacy mode is the real good feature of the camera, the lens being completely hidden is much nicer than even a camera that is off. Which is how my other indoor cameras operate.
Click to expand...

Nifty automation you got there. Thanks for sharing the experience with me. I only want to use these as my garage cameras. So you're likely right... I don't need a whole lot of tracking of moving objects, I'd say .

wittaj said:
The B simply means black. The W means the white one. Apparently the silver one doesn't have autotrack.
Click to expand...

Good catch @wittaj... Wonder what moniker in the model numbers actually signals auto tracking or not... I'll keep researching...

Thanks all!
 
ProTapper said:
Nifty automation you got there. Thanks for sharing the experience with me. I only want to use these as my garage cameras. So you're likely right... I don't need a whole lot of tracking of moving objects, I'd say .



Good catch @wittaj... Wonder what moniker in the model numbers actually signals auto tracking or not... I'll keep researching...

Thanks all!
Click to expand...

The automation is quite nice and keeps from needing multiple cameras scattered around inside. I like cameras but I also enjoy not looking like a prison yard. I am thinking of recreating it outside with a PTZ using the same zigbee sensors on my mailbox and spotter cams. Just trying to find a small enough PTZ with auto-tracking as I think it will be much more useful outside...

I did notice my camera is version 3, you may have an older version.
 
  • Like
Reactions: ProTapper
Duh987 said:
The automation is quite nice and keeps from needing multiple cameras scattered around inside. I like cameras but I also enjoy not looking like a prison yard. I am thinking of recreating it outside with a PTZ using the same zigbee sensors on my mailbox and spotter cams. Just trying to find a small enough PTZ with auto-tracking as I think it will be much more useful outside...

I did notice my camera is version 3, you may have an older version.
Click to expand...

Awesome automation plans man... Wonder how I can tell what models are v3 and if it's software or hardware changes... I appreciate the knowledge share here...
 
You must log in or register to reply here.
Top Bottom