Anyone have VTO6221E Firmware

L

Levent

n3wb
Jan 26, 2021
25
2
Australia
Was wondering if anyone had the firmware for the dahua vto6221e multi apartment so I can set up multi codes to open different doors
 
What should happen when a 2nd door code was entered? Do you have a DEE1010A/B connected to the RS485 port of the VTO?
Only so you would have a (official supported) extra relay for a second door.

If not, you can off course dive deeper into the VTO's functions with this script.
 
riogrande75 said:
What should happen when a 2nd door code was entered? Do you have a DEE1010A/B connected to the RS485 port of the VTO?
Only so you would have a (official supported) extra relay for a second door.

If not, you can off course dive deeper into the VTO's functions with this script.
Click to expand...
I have the DEE1010A connect to the RS485 A and B port of the VTO, the 2nd strike works it's just that I can only open it from the monitor or if I tell the intercom to only open the 2nd one instead of the 1st with with fobs or codes but there is meant to be a password manager in there for me to add multiple codes and assign each code to a door
 
I would try V4.4 firmware General_VTO3211D_MultiLang_PN_SIP_Market_V4.400.0000000.3.R.20191019
This one is based on V4.5 and comes with lots of new features. Maybe user management is better with this.
 
Don't go higher than that version! Mine is now in a boot loop when I tryed V4.5
Now I have to get it out of the boot loop and I don't know how....
Version advised by Riogrande is working good and you will have a few more options
 
riogrande75 said:
I would try V4.4 firmware General_VTO3211D_MultiLang_PN_SIP_Market_V4.400.0000000.3.R.20191019
This one is based on V4.5 and comes with lots of new features. Maybe user management is better with this.
Click to expand...
Last time I remember the ver 4.4 and 4.5 was for the non-apartment style one the vto3221e-p
 
riogrande75 said:
I would try V4.4 firmware General_VTO3211D_MultiLang_PN_SIP_Market_V4.400.0000000.3.R.20191019
This one is based on V4.5 and comes with lots of new features. Maybe user management is better with this.
Click to expand...

I put that version on the 6221E, but it also went in a bootloop. The official version from Dahua website is the only thing that is working perfect: GeneralTO3221E_Eng_P_SIP_Market_V1.000.0000000.6.R.20190130. But then I miss the Dutch language....

The version for the 3221 V4.4 DHTO3221E_MultiLang_PN_SIP_Market_V4.400.0000000.3.R.20191019 is also working and than ofcourse more options, BUT the screen is not working anymore. I tryed a lot (resetting, booting, old frimware > newe firmware > reset, etc), but the screen is of...
Is there an option to turn it on somehow?
 
Hello, I have VTO6221E-P with only english language. I was update to DH_VTO3221E_Eng_P_SIP_V1.000.0000002.0.R.20210720 but still only english. Is any way to write some multi language firmware with working screen?
When I flash with DHTO3221E_MultiLang_PN_SIP_Market_V4.400.0000000.3.R.20191019 I will lose screen, right?
 
mako85 said:
Hello, I have VTO6221E-P with only english language. I was update to DH_VTO3221E_Eng_P_SIP_V1.000.0000002.0.R.20210720 but still only english. Is any way to write some multi language firmware with working screen?
When I flash with DHTO3221E_MultiLang_PN_SIP_Market_V4.400.0000000.3.R.20191019 I will lose screen, right?
Click to expand...

Yes, then the screen is not working anymore.
That is a shame, because the V4.4 has a lot more options. Also with language...
 
Levent said:
Don't quote me, I'm pretty sure I tested it last month it offered me the password manager but wouldn't allow me to locate a code to either lock 1 or lock 2 but did allow for multiple codes
Click to expand...
Did you test it on the 6221? And if so, was the screen still working?
 
A little off topic - I have this intercom and I'm powering it off a TP-Link gigabit POE+ switch with 802.3af support (tl-sg105pe). I have it set up as a gate station with a 24m cat5e cable running to the installation point.

I'm having an issue where the intercom goes offline and has issues when it's night time. I suspect it's a power issue when extra power is needed for the lights on the device when it is dark. Anyone know any solutions or poe switches that work?

Much thanks!
 
Last edited:
You must log in or register to reply here.
Top Bottom