B5442E-ZE video jumping back and forth.
- Thread starter Terri Underhill
- Start date
I don't know if this is an error or not under safety...
Attachments
I thought you were able to playback directly from one of the cameras which means it had a SD card. I think I’m getting confused now
With that being said you won’t be able to playback in SmartPSS by selecting the camera directly, you will have to select the NVR then select the camera
I did add a recording here I created with the nestcam UI but the video in the 12z cam playback doesn't show any recordings. I don't understand why the the 12z UI in IE won't let me see recordings in playback. This is overwhelming. And it is confusing to me and I am familiar with any of this.
Without a SD card there’s nothing saved inside the camera to playback. The only thing recording is the NVR hard drive at this point
that has worked fine for my other cams. I don't understand what you mean by select the nvr first... this is what I see in playback in PSS.
You might check, from the individual camera page Destination-> Local just to make sure they don’t have a SD card
you are so smart. It was there. But I'm not suppose to make videos in PSS because it makes the video jump. I have to make my videos in the cams UI. Thank you for finding the cam in PSS. Can you find my video in the cam's UI Please?
this is so easy for those that understand this. This is very stressful for people like me. Thank you for finding it in PSS. I need to make MP$ in the UI so I don't get video jumping around.
Well damn! The UI is suppose to be smarter than me. It should have told me I was missing the SD card. I thought the SD card was just for back up. It looks like I do have an SD card in the nestcam. I'll have to check my other cams. Thank you! Obviously the card isn't used.
I wasted 3 hours at least trying to change the order of a few of my cameras Thursday. Restarted the NVR a few minutes ago since my email notifications quit working earlier. One camera was gone and another was moved in its place instead of where it was since Thursday. Got the camera back albeit in a different spot, no email still. They’re frustrating at times
you might try a different email address. I have never received a notice from this forum if someone replies to a message. I used to a few years ago. I don't know if someone has replied unless I come here.
Well it looks like I do have a sd card in my 360 and nest cam. And I tried to pull up my deercam through the UI and it can't find the page. But I think I took the card out when I moved it to the deer feeder because it is the 25 zoom Dahua that reboots at least 5 times a day so I don't record that. I don't understand why I can't change the destination so it doesn't need to go to the SD card.
I'm real bummed about this. I dread taking it down and putting it back up. It was really hard to get it lined up with the barrel being 80' away. I have the cam mounted to a 2x8 and it has to be at the right angle side to side since the cam can only be adjusted up and down.
I was looking at the 12z settings. Is this important?
Attachments
Sure seems like I should be able to tell it to look somewhere other than the SD card
