BI 5.4.9.7 problem or IE configuration problem on Dahua SD49225XA-HNR PTZ

Cooltiger

n3wb
Joined
Jun 28, 2020
Messages
10
Reaction score
6
Location
2701 NSW Australia
I have been configuring an Andy Dahua SD49225XA-HNR PTZ for a few days. I hade it going OK but now have a problem;
  • 1 On IE can configure and control the camera PTZ but cannot see the camera view.
  • 2 On BI 5 I can see the camera output but not control PTZ
  • 3 On UI3 I can see but not control camera PTZ
  • 4 On Chrome camera IP I can see the camera and control PTZ.
I hope someone has had this problem and can recommend a fix.
 

inline6

Getting the hang of it
Joined
Nov 18, 2019
Messages
36
Reaction score
31
Location
canada
I have been configuring an Andy Dahua SD49225XA-HNR PTZ for a few days. I hade it going OK but now have a problem;
  • 1 On IE can configure and control the camera PTZ but cannot see the camera view.
  • 2 On BI 5 I can see the camera output but not control PTZ
  • 3 On UI3 I can see but not control camera PTZ
  • 4 On Chrome camera IP I can see the camera and control PTZ.
I hope someone has had this problem and can recommend a fix.
I downloaded the Chrome extension and selected :IE 10 Standards Mode. Everything works for viewing and programming for me.
To control MY camera in BI 5 : Network IP =ONVIF
Enable ONVIF in the cameras setup. Settings/Network/Access Platform/ONVIF/On/save
Good luck
 

th182

BIT Beta Team
Joined
Sep 11, 2018
Messages
630
Reaction score
905
Location
Minnesota
I downloaded the Chrome extension and selected :IE 10 Standards Mode. Everything works for viewing and programming for me.
To control MY camera in BI 5 : Network IP =ONVIF
Enable ONVIF in the cameras setup. Settings/Network/Access Platform/ONVIF/On/save
Good luck
I also have my BI PTZ settings set to ONVIF (OXML) for both of my cameras. I used Find/Inspect and that is what it selected. As for viewing video in IE, there may be a plugin(?) that needs to be installed. It should automatically prompt for download/install when you connect to the camera, otherwise maybe your security settings in IE block it? I have also read that the chrome extension works just as well.
PTZsettings.PNG
PTZsettingsA.PNG
 

FlipNJ

Pulling my weight
Joined
May 3, 2016
Messages
335
Reaction score
124
In most case's, instead of ONVIF, choose Dahua New V4 in the dropdown.
It will work better with the PTZ.
Weird.. had my 49225 set up to generic onvif too and on 5.4.9.8 there is no Dahua New V4.
 
Top