I installed a few systems a few years back using BI 4, so I have some experience with the software but those systems are Motions Trigger only. The system in my home is a BI 5 system and while for the most part they work fine, I find that I need to set the system to perform continuous recording over night. So the problem I have run into is that some cameras are just still running motion detection and other don't even trigger. I have setup Day and Night Profiles and Schedules Day is Motion triggered from 7:30am -10:00pm and Night is (supposed to be Continuous Recording) 10:00pm - 7:30am.
I have attached screen shots of what I assume are the dialog boxes that control the problems area I am having - Also I have confirmed that my Clip Storage is not the culprit
Maybe some one will see a red flag I mis-configured
Thanks in advance
I have attached screen shots of what I assume are the dialog boxes that control the problems area I am having - Also I have confirmed that my Clip Storage is not the culprit
Maybe some one will see a red flag I mis-configured
Thanks in advance
Attachments
-
84.8 KB Views: 20
-
88.4 KB Views: 19
-
93 KB Views: 18
-
64.9 KB Views: 18
-
55.8 KB Views: 18
-
76.3 KB Views: 18
-
78.9 KB Views: 17
-
62.4 KB Views: 17
-
57.6 KB Views: 15
-
87.1 KB Views: 14
-
61 KB Views: 14