I cannot for the life of me figure out Stunnel and ssl. I would like to cast BI to my various monitors using Chromecast. I have installed Stunnel, and looked at the manual (I believe it is written in Sanskrit) and cannot figure it out
Is the machine your going to cast from on the same subnet as your BI server? If so you don't need either STunnel or VPN for that those are for remote access to your BI server. If that's what your trying to setup the VPN tunnel would be setup via your router (ASUS makes this pretty easy and from there you export your config file which you then import into the OpenVPN app on your mobile device). STunnel requires modifying the config file after installing to route the traffic also it requires that you forward port 443 or some other port you choose from the WAN to the IP of your BI server. VPN is the most secure of the two but will keep you from being able to use Geofencing if you don't leave the VPN tunnel active. Either way you should also check that UPNP is disabled on your router to make sure your cameras and other devices/apps are not able to create port forwarders without you knowing about it. If you want more information on VPN I can find a post where we discussed that (mainly on ASUS routers), if you want more information on STunnel I can check my config file to see what I had to add to make that work. When I first setup STunnel the port I wanted to use was already in use on my machine via IIS so I disabled the binding for that port so I could use it with STunnel instead. That was before I setup VPN.
With STunnel you change the Stunnel.conf file to
[https]
accept = LocalBlueIrisIP:443
connect = LocalBlueIrisIP:81
Where LocalBlueIrisIP is the ipaddress of your BI server 443 is the external port you open in your router and 81 is the port you have your BI server listening to connections on. Then you use your WAN IP to access the server from remote locations, you can find your WAN IP using a site like What Is My IP? Shows your real IP - IPv4 - IPv6 - WhatIsMyIP.com®
But again this is only to give you access from remote locations and isn't needed for the Chromecast sending of video to your TV
Anyone manage to get this working yet? Is it because we need to have signed certificates perhaps? Every post regarding this issue is just ignored or never resolved.
Of course that is the first place I looked . while I can find it in the "whats new" I cannot find any information on how to find the option or how to use it.
