BI focus control dosn't work for me with IPC-HEW5241E-Z12E

C

Cam_curious

Young grasshopper
Jan 3, 2018
84
19
New Hampshire
I just bought an IPC-HEW5241E-Z12E from Andy to use for LPR purposes. I have everything working OK
but the focus controls in BI don't work. The zoom controls in BI work OK. I have the camera profiles all set to
"manual". The focus control in the camera web page works OK. I have the BI "Make" set to Generic/ONVIF
and the "Model" set to *RTSP H.264/H.265/MJPG/MPEG4. I am running BI Rev: 5.3.7.12 x64.
The camera is running firmware: Version V2.800.0000000.20.R, Build Date: 2020-09-03. This is the
original firmware that came with the camera.

What am I doing wrong?
 
Those controls in Blue Iris are intended for PTZ cameras, not varifocals. If it happened to work for a varifocal then count yourself lucky, or unlucky in this case.

Varifocals are intended to be setup in the camera web GUI and then left alone. They are not designed to be zoomed and focused with any frequency.

If you want zoom/focus control, then a PTZ is what is needed.

If you do not have a PTZ, you can right-mouse click and remove the PTZ control menu from Blue Iris so that you don't see it and accidentally mess up your settings. The bonus is your videos are now larger!
 
  • Like
Reactions: samplenhold, TonyR and sebastiantombs
I got an Onwote PTZ(few years old) and I have the same issue. I tried Dahua and Hik as alternates but then nothing works. I also tried Onwote in the camera selection RTSP 554. On the webapp it says port 80 for Onvif, but 8999 works.
With Generic Onvif just the focus, which I need as I have close object in a section of the screen I need to focus farther past. So I do it in the webapp, but as soon as I use it for any pan or zoom, of course it changes focus.

These have been working pretty well actually. Not the best for night image but not bad.
 
Last edited:
You must log in or register to reply here.
Top Bottom