Hello,
Just want to say thanks, in advance, for this forum's collective knowledge, which was invaluable when setting my system up.
I believe I'm having a similar problem as another user in http://www.ipcamtalk.com/showthread.php/3610-Blue-Iris-kills-my-i7-pc however, I have a different bit of circumstances Please see as follows:
1. My cameras are recording direct to disk
2. 2 Cameras, both are 3mp hikvision running at full res. 20fps reg. quality w/ 11mb buffer
3. PC is a Gen8 HP ML350 running a single E5-2420 Hex proc (12 logical cores) w/ 24GB ram and a dedicated 1gb network port for video from an HP QuadPort NIC.
4. Disks are RAID 10 SATA Array w/ 4- 2TB 7200rpm 64mb cache barracuda drives using a physical raid controller w/ 1gb write cache.
5. Windows 2012 r2 OS
6. BI Version: 4.1.0.0
Essentially, every 4 or 5 days (this has happened even before the 4.1 update, so I cannot claim that it's exclusive to newest update) with no discernible frequency, BI will go from using 13-15% CPU to 95%+ and causes the system to be practically unresponsive. Stopping the service immediately returns the system to a usable state, however, once I allow the service to resume, I'm back up at full utilization of my CPU.
The only thing I can, for certain do, to get my system back to a usable state is rebooting the physical system. Once I reboot, the system is perfect until, for no particular reason, it starts this issue up, again.
Anyone seen this or have any ideas?
Just want to say thanks, in advance, for this forum's collective knowledge, which was invaluable when setting my system up.
I believe I'm having a similar problem as another user in http://www.ipcamtalk.com/showthread.php/3610-Blue-Iris-kills-my-i7-pc however, I have a different bit of circumstances Please see as follows:
1. My cameras are recording direct to disk
2. 2 Cameras, both are 3mp hikvision running at full res. 20fps reg. quality w/ 11mb buffer
3. PC is a Gen8 HP ML350 running a single E5-2420 Hex proc (12 logical cores) w/ 24GB ram and a dedicated 1gb network port for video from an HP QuadPort NIC.
4. Disks are RAID 10 SATA Array w/ 4- 2TB 7200rpm 64mb cache barracuda drives using a physical raid controller w/ 1gb write cache.
5. Windows 2012 r2 OS
6. BI Version: 4.1.0.0
Essentially, every 4 or 5 days (this has happened even before the 4.1 update, so I cannot claim that it's exclusive to newest update) with no discernible frequency, BI will go from using 13-15% CPU to 95%+ and causes the system to be practically unresponsive. Stopping the service immediately returns the system to a usable state, however, once I allow the service to resume, I'm back up at full utilization of my CPU.
The only thing I can, for certain do, to get my system back to a usable state is rebooting the physical system. Once I reboot, the system is perfect until, for no particular reason, it starts this issue up, again.
Anyone seen this or have any ideas?