Blue Iris v5.2.7.3

[105437]

I changed to edge vector when Gaussian was marked deprecated, and went from zone crossing to one zone because of it. I never could get edge vector to work reliably using zone crossing.

Edit: I got that reverse. I could never get zone crossing to work reliably using edge vector.

Same for me. Edge Vector reliably detects motion when using only one zone. Anytime I try zone crossing it fails miserably to detect motion.

 

[b0bthebuilder]

5.2.7.5 is now out and seems to have fixed all my problems (28 cameras, using substreams to cut down CPU usage)
I can now double-click on individual cameras (in the main BI GUI) and see the high-res stream with no problems.
CPU usage is still nice and low.
Well done Ken! (I know, he doesn't check here)

 

[TL1096r]

5.2.7.5 is now out and seems to have fixed all my problems (28 cameras, using substreams to cut down CPU usage)
I can now double-click on individual cameras (in the main BI GUI) and see the high-res stream with no problems.
CPU usage is still nice and low.
Well done Ken! (I know, he doesn't check here)

Yes, agreed. Installed an CPU is lower now and no issues.

 

[TL1096r]

anyone else having issues with updates? last update causing BI to crash.

 

[b0bthebuilder]

anyone else having issues with updates? last update causing BI to crash.

not me

running 5.2.7.8 with no problems

 

[b0bthebuilder]

I was too quick. BI just crashed during clip playback.... so have rolled back to 5.2.7.7

 

[TL1096r]

I was too quick. BI just crashed during clip playback.... so have rolled back to 5.2.7.7

I am not sure what is going on - my cameras crashed with 5.2.7.8 and I went back to a different model too. It is not good that the cameras crashed while sleeping so I could not do anything.

 

[Tinbum]

I was too quick. BI just crashed during clip playback.... so have rolled back to 5.2.7.7

Yes mine crashed, same situation.

 

[105437]

Getting this on .7 and .8 fairly often...

5/11/2020 10:11:03 AM App: Restarted after unexpected shutdown (1500/240) (0)

 

[DsineR]

Same for me. Edge Vector reliably detects motion when using only one zone. Anytime I try zone crossing it fails miserably to detect motion.

Agree - Edge Vector is terrible with Zones! All my cams with Zones using Gaussian.

 

[bp2008]

Heh. I never transitioned away from "Simple" motion detection, and never had a problem.

 

[tward392]

Agree - Edge Vector is terrible with Zones! All my cams with Zones using Gaussian.

But Gaussian is deprecated which means it may be removed soon. There was also an issue with it working a few versions ago, so I switched to Edge Vector and it seems to be working, although I don't use Zones much except to black out a few areas.

 

[tward392]

5.2.7.9 seems to have fixed the crashing during playback.

 

[105437]

5.2.7.9 still crashing during playback for me.

 

[b0bthebuilder]

5.2.7.9 still crashing during playback for me.

playback OK now for me

 

[iseeker]

But Gaussian is deprecated which means it may be removed soon. There was also an issue with it working a few versions ago, so I switched to Edge Vector and it seems to be working, although I don't use Zones much except to black out a few areas.

you must not have any swaying trees if you don't use zone crossing!

 

[105437]

you must not have any swaying trees if you don't use zone crossing!

I have a ton of swaying trees and they get the best of me with one zone or multiple zones. Constantly trying things to no avail!

 

[105437]

playback OK now for me

BI is still crashing, not just during playback but also while it's running. Event Viewer isn't a whole lot of help... just says BI stopped interacting with Windows and was closed.

 

[tward392]

You are correct, it is still crashing, just not on all cameras for me now. 2 out of the 4 are still crashing during alert playback.

 

[TL1096r]

knock on wood... it seems to be working ok now with new update.