Cam doesn't show port on NVR 4208 8P

[DWinters1979]

Hi guys,
busy with my new Dahua NVR to install it and so on.
I've got two Dahua IPC HDW 5231RZ cam's and from one cam i can't see the port number, only the TCP port number 37777.
And from that on i can't acces it via a webbrowser to change some settings.
So anybody an idea what i have to do with it?

Thanks for the help!

Cheers.

 

[bigredfish]

unplug the camera, reboot the NVR,

Then plug the camera back into the NVR and reboot the NVR again,

Dont mess with the Registration page or try to force the camera to move to th bottom pane. Let the NVR do it by itself.

***PSA for those with a New DAHUA NVR with Built-in PoE switch

 

[DWinters1979]

It works!, strange thing is that i can't acces the cam's trough the internetexpl logo

Damn, just logging in and see 37777 in place of port number

 

[bigredfish]

hmmm.... have you changed anything on the camera? Delete the ones that show 37777 from the bottom pane. Then reboot.
Dont try to manually move them from top pane to bottom pane.

Correct, If you see port 37777 you wont be able to access them via the IE icon

 

[DWinters1979]

Thanks, will try it tomorrow