Cameras rebooting when nvr is connected to router

Teken

Known around here
Joined
Aug 11, 2020
Messages
1,521
Reaction score
2,747
Location
Canada
IPv6 mode can't be changed.


OK so just to be clear I should:
Disconnect NVR from router.
Factory reset cameras.
Connect camera to laptop and login using the factory IP?
Change to DHCP and then plug cameras back into NVR?

Also my router can't see my cameras just the NVR.
No . . .

- Reset both cameras and set to DHCP.

- Remove NVR from the network / disconnect

- Reset the router and disconnect all network appliances

- Power up a single camera via 12 VDC / POE injector.

- Validate the camera can be seen in the routers DHCP lease table. Login to the single camera to confirm all network attributes are correctly populated.

Monitor and report back what’s observed. Do NOT have anything connected to the network besides the ISP Modem. If the ISP modem is also a router disable the DHCP Server and also set it bridge mode.
 

LMN79

n3wb
Joined
Apr 11, 2022
Messages
13
Reaction score
1
Location
uk
Sorry I've not replied for a while.
I have ordered a POE injector (should be here next week) to make things easier as my ladders were stolen a few months ago.
As soon as I've done what you suggest I'll let you know what happens.

Thank you.
 
Top