Can not connect to camera anymore?

A

ANTH040

Getting the hang of it
Oct 18, 2015
165
32
Pulled a camera ethernet out to move to a new switch, put it in the new switch and now can not get any video from it or connect to the ip camera admin page. Tried to see it on config tool and nothing here either. Tried it back in the old switch and still nothing.

The camera has power and a connection light as I can see it in the router page as 192.168.1.19 but other than that nothing.

Does the camera have to come down and have a factory reset button?
 
ANTH040 said:
The camera has power and a connection light as I can see it in the router page as 192.168.1.19 but other than that nothing.
Click to expand...
Can you:
  • Open the camera's webGUI with that IP?
  • Can you ping that IP?
 
No it can not be reached

If I cmd ping the camera it has a timeout

* just tried a reset under the camera and still nothing but I can see the ip has changed to 192.168.1.108 in the router page
 
Last edited:
Was that IP set in the cam as static?
Is it possible to run a spare, good cable to that cam and bypass the existing cable? Perhaps something happened to the cable/RJ-45 connection when you moved that.
 
  • Like
Reactions: ANTH040
omg its the wire what are the chances of two cameras going down with two different wires (one of them just bought a month ago) thanks for your help.
 
  • Like
Reactions: TonyR
ANTH040 said:
omg its the wire what are the chances of two cameras going down with two different wires (one of them just bought a month ago) thanks for your help.
Click to expand...
I was just reading your "camera disconnecting from POE" last month. ;)
Glad I could help you find the problem.

It's funny how such technical devices can sometime have mechanical issues....the hint for me was that things were fine until disturbed.
 
  • Like
Reactions: AP514, looney2ns and ANTH040
You must log in or register to reply here.
Top Bottom