I had installed an outside VGA cam on a fixed IP port 80 two years ago, and an inside wireless cam (Dlink) on the same IP but port 81. Both worked great for this past years. Cameras are in Romania, I'm in US
Three days ago I had my guy over there replace old VGA cam with a newer HD cam, Hikvision DS-2CD2012F-I.
Essentially he just swapped old camera with new camera.
For the first 24 hours, both inside D-link cam and new outside Hikvision cam worked fine, one on port 81 and another on port 80, same IP.
I was accesing Hikvision using IE (Windows 10) and iVMS app on my phone and the iVMS mobile app on my phone.
After about 24 hours, IE access stopped working. When I try to acces the Hikvision camera I am asked for user name and pass of the other camera (Dlink), so looks like somehow the port 80 access is not "touching" my other port 81 on the router.
So I can no longer access my new Hikvision camera using the webbrowser, which is my desired way to access the cam. But both the PC app and mobile app from Hikvision continue to work just fine.
What could be wrong with the IE access and how can I restore that access to the camera?
(the UPnP protocol is enabled in the camera). Need to add router settings were not changed, and actually the router is locked by the local internet provider (cannot access it)
Thank you
Three days ago I had my guy over there replace old VGA cam with a newer HD cam, Hikvision DS-2CD2012F-I.
Essentially he just swapped old camera with new camera.
For the first 24 hours, both inside D-link cam and new outside Hikvision cam worked fine, one on port 81 and another on port 80, same IP.
I was accesing Hikvision using IE (Windows 10) and iVMS app on my phone and the iVMS mobile app on my phone.
After about 24 hours, IE access stopped working. When I try to acces the Hikvision camera I am asked for user name and pass of the other camera (Dlink), so looks like somehow the port 80 access is not "touching" my other port 81 on the router.
So I can no longer access my new Hikvision camera using the webbrowser, which is my desired way to access the cam. But both the PC app and mobile app from Hikvision continue to work just fine.
What could be wrong with the IE access and how can I restore that access to the camera?
(the UPnP protocol is enabled in the camera). Need to add router settings were not changed, and actually the router is locked by the local internet provider (cannot access it)
Thank you