Can't find camera on network SADP

M

Mars Bar

Getting the hang of it
May 2, 2016
161
32
Hi all, had a Chinese PTZ for many years stopped working when i upgraded my nvr (language mismatch)
Now I have a new NVR I wanted to try connect it but can't find it on my network.
Power is going to it as i can see the IRs on it.
Why would I not see it on my network using SADP?
 
As far as I'm aware SADP is specifically for Hikvision cams, not just 'any' Chinese camera

You may be better off with WireShark
 
  • Like
Reactions: TonyR
Is that by any chance the cam with "video loss" on your other post regarding the new NVR?

Do you know the cam's IP address?
 
TonyR said:
Is that by any chance the cam with "video loss" on your other post regarding the new NVR?

Do you know the cam's IP address?
Click to expand...
Yeh video loss is the language mismatch. Used to be able to find it on SADP and my modem but nothing now. I am sure i remember the correct IP address i made for it but that doesn't even load the page.
 
Mars Bar said:
...
I am sure i remember the correct IP address i made for it....
Click to expand...

Do you recall how you were able to define the IP address for it previously? (I.E.: via camera web interface (GUI), via DVR GUI, etc)

Consider plugging the cam in to your 'everyday' network and monitor your DHCP server leases (clients) listing and see of the camera appears
 
  • Like
Reactions: BigFoot and TonyR
SpacemanSpiff said:
Do you recall how you were able to define the IP address for it previously? (I.E.: via camera web interface (GUI), via DVR GUI, etc)

Consider plugging the cam in to your 'everyday' network and monitor your DHCP server leases (clients) listing and see of the camera appears
Click to expand...
Hikvision SADP is what i used, but now its no longer there.
 
Ive used all sorts of scanners and it isn't coming up.
I also can't log into my other cameras through their direct IP addresses now either
 
You must log in or register to reply here.
Top Bottom