Looking forward to hearing if this new 2.4.5 RC1 works out for you, as it seemed from your previous post that you were having trouble with the 2.3.4 release.
CodeProject.AI Version 2.0
- Thread starter MikeLud1
- Start date
BORIStheBLADE
Getting comfortable
BI only wants to download the 2.3.4 version for some reason. Should I download the 2.4.5 version manually?
or reboot, duh, shows now. I ought to know better... but the other one showed without the reboot! thanks!Clear browser cache and try again. THats what worked for me heh. Mike told me
Did you do a full uninstall following the steps in the below post.
CodeProject.AI Version 2.0
The new Mesh feature uses multiple computers running CPAI to lower the processing time for the Obj Det?? So for instance you could be running 5 BI servers with 20 cameras each, all running CPAI all sharing each others CPAI service? Or would that be a wrong way to look at it? YES, the other...
I just installed 2.4.5 and was going to test YOLOv8. However, it won't install. I get "Call failed" when I click the install button.
BORIStheBLADE
Getting comfortable
Did you do a full uninstall following the steps in the below post.
CodeProject.AI Version 2.0
The new Mesh feature uses multiple computers running CPAI to lower the processing time for the Obj Det?? So for instance you could be running 5 BI servers with 20 cameras each, all running CPAI all sharing each others CPAI service? Or would that be a wrong way to look at it? YES, the other...ipcamtalk.com
Short is no. Long is I did a search on my C drive and anything labeled codproject I nuked. Also I don't have folder C:\ProgramData\CodeProject
Just deleted everything I could find again and installing 2.4.5
One more thing: The Blue Iris PC runs 2.4.5 now, shows Mesh active, sees the other PC, and seems to be working like expected. The Second (Non blue Iris ) PC (that shows up in the first BI Mesh status) , is running 2.4.5 ok it seems, but in "Mesh" it shows "Remote Servers in Mesh: 0" , and the main BI PC isn't showing there.
So the BI PC sees and uses the 2nd PC, but not the other way? Is that expected? (I'm not running BI on the 2nd PC).
So the BI PC sees and uses the 2nd PC, but not the other way? Is that expected? (I'm not running BI on the 2nd PC).
The way you have your Bi machine on a different network segment. Your BI machine can see your Bobpc but not the other way around. I use mine on same network, so can't help you out, but sure someone here can. I would think for it to work right it has to be a 2 way street.
Updated steps to install CodeProject.AI 2.4.5
- Disable Blue Iris Main AI also if you have Auto start/stop with Blue Iris enabled disable this also. Auto start/stop with Blue Iris was add when DeepStack kept on crashing so this is not need for CP.AI
- Uninstall CodeProject.AI
- Delete folder C:\Program Files\CodeProject
- Delete folder C:\ProgramData\CodeProject
- Install CodeProject.AI v2.4.5
- After all modules are installed enable Blue Iris Main AI
- Reboot the PC
Last edited:
BORIStheBLADE
Getting comfortable
hmmm, I run a dual NIC, and I think the BI PC is on the same network as the other pc with the cameras on a separate net... but I do see CP saying the "active IP address" is the camera one? I'm unclear what I would have to change here...
@MikeLud1 Should I try these steps as a way to fix the error I'm receiving when trying to install YOLOv8?
BORIStheBLADE
Getting comfortable
Ah! I had that checked through all of my issues then ended up turning off everything to clear CPAI and let BI run for a while on its own. Maybe that helped.