Hello, everyone,
after the suggestions here in the forum I ordered an IPC-T5442TM-AS from Andy (@EMPIRETECANDY ) over Aliexpress.
Today the camera arrived. Unfortunately I have the following problem and can't get any further here:
If I connect this camera directly to my PC via POE injector, I can access the camera via IP 192.168.1.108.
However, as soon as I statically assign a different IP address from my network or configure DHCP and connect the camera to my router, I can no longer access the camera from my PC.
If I have configured DHCP, the camera will also be assigned an IP address from the correct network, but I can neither retrieve this address in the browser nor can I reach it via ping.
If I connect the camera directly to the PC again, I can reach the camera again. I tried this with to different routers and both have the same problem.
I never had problems with other cameras from Dahua at this point.
In the meantime, I have already done a firmware update and reset the camera several times.
Unfortunately, due to this issue I am not able to connect the camera with Blue Iris, which is my real goal. With other cameras from Dahua I never had problems here.
I would be very grateful for help, otherwise I will unfortunately have to send the camera back.
Many greetings
Bene
after the suggestions here in the forum I ordered an IPC-T5442TM-AS from Andy (@EMPIRETECANDY ) over Aliexpress.
Today the camera arrived. Unfortunately I have the following problem and can't get any further here:
If I connect this camera directly to my PC via POE injector, I can access the camera via IP 192.168.1.108.
However, as soon as I statically assign a different IP address from my network or configure DHCP and connect the camera to my router, I can no longer access the camera from my PC.
If I have configured DHCP, the camera will also be assigned an IP address from the correct network, but I can neither retrieve this address in the browser nor can I reach it via ping.
If I connect the camera directly to the PC again, I can reach the camera again. I tried this with to different routers and both have the same problem.
I never had problems with other cameras from Dahua at this point.
In the meantime, I have already done a firmware update and reset the camera several times.
Unfortunately, due to this issue I am not able to connect the camera with Blue Iris, which is my real goal. With other cameras from Dahua I never had problems here.
I would be very grateful for help, otherwise I will unfortunately have to send the camera back.
Many greetings
Bene
Last edited: