Could be a bunch of things
- Check cables to those cameras are plugged in and not damaged somewhere - all seem fine
- Temporary glitch in your PoE switch, try reboot of the NVR - i think ill try this
- Failing internal PoE switch - hope not its quite new
- Log into NVR and see what they camera registration page is showing - i will do this also
- Any recent construction of critters in the attic? no dont think so! hope not!
Thank you very much!! I shall give e this ago!! I got in touch with the guy who installed he said this to me below:
Hi mate the camera creates it’s on address once installed and will require the port clearing and a hard reset on the camera itself to reinstall to the system. Just deleting and adding again won’t allow it back on as it needs its address resetting locally on the camera. It has a reset button on the camera itself. If you delete the info off the port. Reset the camera and plug back in it will find itself automatically if there isn’t a problem with the cable/connections/camera/recorder
Im assuming that's the same as what suggested? I can't seem to get near the camera as it's too dark atm. But ive fully powered the whole system down gunna wait a few minutes and power it all back up again see if it automatically finds the camera. Also assuming deleting the info of the port means just deleting the whole camera?