- Sep 29, 2014
- 282
- 30
Hey gang. I've got a DAHUA DH-SD59225U-HNI and a clone. Tornado season occurred, and with the pouring rain, I learned I did not have a good seal on the mounting box and did not drill a drain hole in the bottom. The ethernet connections got wet.
Both cameras are none functional. One accepts power but does not transmit data. The other is not transmitting data, not power.
Before I try just re-crimping the ends, does anyone have a patch/wire diagram for the ethernet ends? And if it is just not burnt ends, are these components repairable at a reasonable cost vs buying new?
And if anyone can affect repairs and you are in DFW, I'm willing to pay a little. Each camera cost me $450 and $250, so there's also the cost vs buy again dilemma.
Thanks for your time.
Both cameras are none functional. One accepts power but does not transmit data. The other is not transmitting data, not power.
Before I try just re-crimping the ends, does anyone have a patch/wire diagram for the ethernet ends? And if it is just not burnt ends, are these components repairable at a reasonable cost vs buying new?
And if anyone can affect repairs and you are in DFW, I'm willing to pay a little. Each camera cost me $450 and $250, so there's also the cost vs buy again dilemma.
Thanks for your time.